PDA

View Full Version : Fab9Tuning EFR Manifold



psulja
01-30-2015, 10:32 PM
Just released this week by Fab9. A readily available vband manifold for Borg Warner's EFR turbos. This thing looks so pretty!

Check out the intro thread here (http://www.miataturbo.net/fab9-tuning-miata-performance-parts-99/new-fab9-side-mount-efr-manifold-82879/)

Side Mount Stainless EFR V-Band Turbo Manifold (http://www.fab9tuning.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=420&virtuemart_category_id=73&Itemid=933&lang=en)


EWG location shown below. This location was ideal for obvious routing reasons and for those of you who have a little hoon in you and wish to rotate your EWG and dump through the hood (blame the Evo guys). Also, this makes routing the manifold reference lines, away from heat and short.

https://farm8.staticflickr.com/7392/15779974573_d0056f6bf2_z.jpg

https://farm8.staticflickr.com/7433/15779974113_a02585c731_z.jpg


Introducing the solution many of you have been waiting for and soon won’t have to. The all new Fab9 Side Mount V-Band EFR Turbo Manifold. Like many of the solutions we offer, we set out to solve problems with quality solutions that don’t break the bank. Whilst cost isn’t sky high, don’t be fooled, we’ve sacrificed nothing in the means of quality and functionality. When paired with Borg Warner EFR technology that continues to prove itself on our small displacement engines you can expect extreme efficiency that will produce a much more linear power delivery than could be expected in the past from similar sized GT or even GTX solutions.

The manifold is produced with complete Schedule material, no hangers or turbo cranes will be necessary. Depending on your configuration, manifolds are available with a multitude of options including - EGT Sensor Bung welded to the collector, External Wastegate configuration and coatings.

Features:

Full Stainless Construction
Sch10 Thick Wall 304 Stainless
0.500” CNC’d Flange
Oval to Round Port Transitions
Fully Back Purged Tig Welded Fabrication
High Flow Merge Collector
Side Mount AC + PS Compatible Design

wannafbody
02-02-2015, 08:32 PM
Looks cool