revlimiter Horn Buttons

[revlimiter]

http://revlimiter.net/store/horn/horn-all.jpg

revlimiter Horn Buttons (http://revlimiter.net/store/horn-button.php)


Highest quality Italian horn buttons with custom domed badges.
Insert is the same as the badges - composed of cut vinyl and solar-cell quality polyurethane epoxy.
Fits every steering wheel I've tested - Momo, Nardi (with horn retainer ring), and Sparco.
Horn can ground with a wire or through the steering column.

Go to my store (http://revlimiter.net/store/horn-button.php) for price and ordering info! Standard models are currently $49 and shipping (USD). If you want custom colors, the price
would be a bit higher.

Details:
http://revlimiter.net/store/horn/horn-wheel2.jpg
revlimiter Horn Buttons fit Momo wheels perfectly. You need to remove the metal horn retainer ring that most Momo horn buttons require.

http://revlimiter.net/store/horn/horn-wheel3.jpg
The same button also fits Nardi steering wheels! You need to use the metal horn retainer ring (goes between the steering wheel and hub) for the button to fit a Nardi.

http://revlimiter.net/store/horn/horn-back.jpg
The button features a dual grounding setup. If your horn does not ground through the steering column (not common), you can attach a ground wire to the outside terminal. The signal terminal (center) rotates to allow the button to fit in a small space such as a quick release.


These are NOT cheap Chinese horn buttons like you'll find on ebay.

I shopped around for a long time, talked to just about every horn button vendor on the planet, and tried out innumerable different buttons during my daily driving. These are made in Italy and feel lovely to press. They also fit very well. I'm extremely pleased with them.

I couldn't sell a cheap horn button and be able to sleep at night.

[revlimiter]

Designs:

http://revlimiter.net/store/horn/horn-elanore-b.jpg

http://revlimiter.net/store/horn/horn-elanore-r.jpg

http://revlimiter.net/store/horn/horn-pro-b.jpg

http://revlimiter.net/store/horn/horn-pro-blk.jpg

http://revlimiter.net/store/horn/horn-pro-r.jpg

http://revlimiter.net/store/horn/horn-eunos.jpg

http://revlimiter.net/store/horn/horn-36.jpg

http://revlimiter.net/store/horn/horn-60.jpg

http://revlimiter.net/store/horn/horn-v-blk.jpg

http://revlimiter.net/store/horn/horn-v-b.jpg

http://revlimiter.net/store/horn/horn-ms-red.jpg

http://revlimiter.net/store/horn/horn-ms-blk.jpg

[revlimiter]

FAQ:

Can I have the horn button in chrome?
No. It comes in matte black only.

Can I order an Elanore (or Prototipo or Type V or anything else) with a purple/pink/white background?
Sure! Changing colors adds $9 to the price. Use my custom order form (http://revlimiter.net/blog/order/) for this sort of order.

Can I order wheel center cap inserts?
Absolutely! I will make a page for these someday. Basically each center cap order is a custom order. Use the form linked above to talk about this.

Will this fit a Grant/ebay/Unknown steering wheel?
Maybe. I have no idea. I've tested Nardi, Momo, and Sparco. Those work fine.

[Paul B]

These are awesome. Amazing work as always, Adam. Contemplating swapping out my Nardi button for one of yours now lol

[revlimiter]

I've got... 4 Nardi buttons? And a dozen or so Momo ones. They're fun to collect. =)

And thanks!!!!

[revlimiter]

BTW, thanks for the feedback on the horn button thread earlier. It made me realize I just needed to source enough buttons to make all of the designs happen. :)

[Phatmiata]

very cool !!!!

[Greasemonkey2000]

I think these will sell really well, already bought mine! :drinkto:

[Corifto]

Must resist for a little bit, but I will acquire. Beautiful pieces.

[Martin]

Must resist for a little bit, but I will acquire. Beautiful pieces.

Same here. I will get a Prototipo eventually.

[pacman 99]

Good stuff!

[Hammerhead]

These are SOOO awesome! And I ordered mine before they were available to the general public [THANKS, ADAM!].

I got the Type MS to go with the nose badge, keychains, oil cap and now the wheel cap inserts. I really love the fact that all the logos will be matching across the car.

[Greasemonkey2000]

Totally agree! :drinkto: I have been bothering Adam for some time about horn buttons and he said they were a work in progress but I'm sure he was thinking about them long before most of us!

When i ordered my horn button i decided to order some custom door sill inserts and as usual Adam was very quick when responding to emails and getting the design ready. I can honestly say that Revlimiter offers the BEST customer service hands down, second to none!

Warbird and i thank you! :bow: However my wife and bank account i think is secretly plotting your demise. :ninja: I always get my beautiful/understanding wife's input and 'approval' on parts. :fp:

[Flyin 92]

Time to get a Model 60 in Carrera Green :mrgreen:

[Agent☣Orange]

Freakin' amazeballs Adam!

These are awesome!

[revlimiter]

Thanks everyone!!! I'll have another horn/badge option available... probably next week. Gotta take and post pix.


Time to get a Model 60 in Carrera Green :mrgreen:

What color is that exactly? Keep in mind that all colors need to be an existing vinyl color and that light colored horn buttons don't tend to look very good. That's why most of my buttons have black backgrounds and all are pretty dark.

[WASABI]

Nice work Adam!

[roadsternut]

Any photos of these fitted to a Classico, with the metal ring in place. The standard Nardi button has a thin edge, these are thicker. Or is it possible to take the customised portion of these, and fit to a standard Nardi horn button.

http://i57.photobucket.com/albums/g203/supercarfreak26/IMG_0506.jpg

[revlimiter]

This horn button will work with a Nardi Classico, but you won't be able to use that metal trim ring. You'll have to source a Nardi horn retainer (which goes between the hub and the wheel) and have exposed bolts.

The metal Nardi horn button is a totally unique beast that allows the use of that trim ring. Nardi also has plastic horn buttons that are similar to the standard Momo. That's what my horn buttons are designed to replace.

[roadsternut]

Ok, so fit some Nardis, but not the factory fitment Nardi. Shame.

[Greasemonkey2000]

After doing both the trim ring and w/o on the classico i had, i definitely prefer w/o. Just looks cleaner w/o the trim ring, imo. :)

[roadsternut]

I just don't want to look at nasty bolt heads or screws.

[revlimiter]

I've seen a polished Classico with chrome screws. It looked quite nice.

I have ugly hex bolts on my own Classico. I also have a rare Nardi Tokyo metal horn button and the trim ring. I plan to keep using that combo on that wheel instead of a revlimiter horn button.

I have 9 different steering wheels at the moment. Using my own brand of button on only 7 or 8 of them seems fine. :)

[revlimiter]

Ok, so fit some Nardis, but not the factory fitment Nardi. Shame.

It *fits* all Nardis. They all have the same hole in the center and it will fit all of them. But it's not designed to replace the very-unique deep-well Nardi metal horn button that holds the metal trim ring in place on Classico models. I never claimed that it was.

[Paul B]

I just don't want to look at nasty bolt heads or screws.

ebay has polished bolts for like $15. I just bought a set of Daikei polished bolts from REV9 for $20 +shipping. They look like art.

[Cxmoney]

I bought polished bolt from ebay for $6 shipped. love them.

[revlimiter]

I bought bolts at a local ACE Hardware and polished them with a dremel. I ground off the stamped text on top too.

[freedomgli]

My genuine red MS horn button is now only worth half what it once was thanks to you. As recompense I demand you make a M2-1028 style M2 Incorporated/MOMO horn button for me :lol:

http://www.steveandlee.com/galleries/miata/na/m2-1001-wheel-2.jpg

http://www.steveandlee.com/galleries/miata/na/m2-1001-wheel-1.jpg

[Hammerhead]

I rec'd my package of goods from Adam yesterday. Included were new MS keychains, MS retro oil cap medallion (because I already placed it on my oil cap - in the wrong orientation), matching MS wheel cap inserts for my new 6UL wheels and a new MS horn button. Just like Freedomgli, I will be replacing my genuine MS horn button with Adam's. When my project car is complete, it will have matching logos throughout which will really complete the build and give it a more OEM appearance.

[Phatmiata]

The M2 versions have raised letters under that clear epoxy coating, that will be a challenge for sure.

[Fishbulb]

I'll be ordering one for that Nardi wheel we talked about...just need to find out what color the car it will go into will be!

Very Sweet!

[revlimiter]

I added another horn button to the store (http://revlimiter.net/store/horn-button.php) - Model 80.

http://revlimiter.net/store/horn/horn-80.jpg

There's matching badges and keychains too!

http://revlimiter.net/store/keychains/key-80.jpg

http://revlimiter.net/store/badges/badge-80.jpg

Hit my store to order (http://revlimiter.net/store/). And thanks for the idea MOABmiata!!! This design really filled a hole in my badge collection

[Greasemonkey2000]

Wow you work fast Adam! :bow: Very classy! :drinkto:

[oldgrayleather]

Hey Adam. You know how much I love your work (beyond all the other pieces you've blessed me with, the lighter sticker is nothing short of a sublime addition!!). What say you to creating a horn button inspired by your latest acquisition?? I was neither fast enough nor convicted enough to catch Bogaut's latest sale before you did. :lol::slayer:

[revlimiter]

^ I've already made one in the past. However, I'd prefer to not put the three-little-bird horn buttons as a regular item in my store. They should be reserved for folks who have a wheel and need a new horn button for it.

[Greasemonkey2000]

Received mine a week or so ago, here it is on my 320 Momo Corse steering wheel w/ Revlimiter red Prototipo horn button:
http://i21.photobucket.com/albums/b261/superhonda02/97%20M%20Edition/interior/IMG_1752_zps6vkk5sin.jpg (http://s21.photobucket.com/user/superhonda02/media/97%20M%20Edition/interior/IMG_1752_zps6vkk5sin.jpg.html)


320mm Momo Corse w/ w/ Revlimiter red Prototipo horn button, close up(oriented upside down..because Warbird):
http://i21.photobucket.com/albums/b261/superhonda02/97%20M%20Edition/interior/IMG_1758_zps6vv3nvvy.jpg (http://s21.photobucket.com/user/superhonda02/media/97%20M%20Edition/interior/IMG_1758_zps6vv3nvvy.jpg.html)
Camera/lighting/photos DO NOT do this Revlimiter product justice!!

[RotorNutFD3S]

Adam made a custom button to match my center caps because he's awesome like that.
I love this thing!!! A teaser for now until my new wheel shows up:

https://c2.staticflickr.com/6/5747/22274485552_7d417ec067_c.jpg

[Demon I Am]

That's pretty freaking cool; I'd rock it!