PDA

View Full Version : What did you get for your NA 2015?



Dave737
01-05-2015, 09:09 PM
TSIs
13239

13240

I have matching red paint on the way but I'll probably go with black in the end.
What black would you guys go with, flat, satin, semi gloss?

Martin
01-06-2015, 08:49 AM
My vote is red.

fwdtamiya
01-11-2015, 06:22 PM
Also voting red.

Tacky
01-11-2015, 09:14 PM
Flat and satin only look good about 1% of the time. The other 99% they look crappy. Go with gloss. Red.

bada55mofo
01-14-2015, 11:28 PM
I got these beauties in the mail today.

Dave737
01-15-2015, 06:33 PM
^^Tight^^ Where did you pick those up?

Red it is.
13279
Lots of orange peel and a little deeper than the 24 year old paint but I like.
I got the paint from this place, I'm no painter but I think it is really good stuff.

http://www.automotivetouchup.com/touch-up-paint/mazda/1991/miata/

atank
01-15-2015, 07:41 PM
http://mazdaroadster.net/attachment.php?attachmentid=13279&d=1421368290
They look very good^^

bada55mofo
01-17-2015, 07:13 PM
I got them from GWR...they're pretty stout mounts...quite a bit of NVH.

Dave737
01-19-2015, 01:40 PM
^^ I didn't know Guinness World Records sold auto parts^^

Good-Win Racing :fp:

You got me stumped on NVH though...new vibration happening?

Martin
01-19-2015, 02:01 PM
http://en.wikipedia.org/wiki/Noise,_vibration,_and_harshness

KAL
01-20-2015, 06:29 AM
http://i.imgur.com/VrCbwQY.png

Just won these. An absolute steal!

bogaut
01-20-2015, 07:30 AM
Grn?

KAL
01-20-2015, 08:52 AM
Correct! Eyeing a set of cheap C28's now. Whats up with the low prices on these? They're perfect for the Miata. Looks good too!

bada55mofo
01-21-2015, 10:50 AM
Got some parts in today, supercharger should be happy!

bada55mofo
01-21-2015, 10:55 AM
Finally...a legit Project G spoiler!

BoBo
01-21-2015, 04:39 PM
I just ordered Hard Dog Hard bar Sport for my 96. I wanted at least a single diagonal. However, I have a glass window in the back.

Tkblazer
01-21-2015, 06:07 PM
Man I haven't gotten my car.anything new this year yet. Hopefully new wheels and tires soon

Imontalto
01-21-2015, 06:14 PM
I was going to wait till it got here, but I'm too excited! RS-Products is coming out with a new AC panel and I have one on the way as soon as they release. Here's some pictures!
13308
13309

KAL
01-21-2015, 07:22 PM
Thats really hot!

MightyM
01-22-2015, 12:59 PM
http://i.imgur.com/WhbqYpo.jpg
http://i.imgur.com/ojAnK6i.jpg
http://i.imgur.com/nY1Q9Uo.jpg
http://i.imgur.com/TVqYYqD.jpg
http://i.imgur.com/T3hBF2F.jpg

MightyM
01-22-2015, 01:01 PM
I just finished finished building these!
They were once the Brainstorm low-pro headlights and now something completely custom!
What do you guys think?

jawolf518
01-22-2015, 05:26 PM
Redline leather goods to compliment the interior with my garagestar shifter

13312

JLBMX5
01-22-2015, 06:17 PM
http://i.imgur.com/WhbqYpo.jpg
http://i.imgur.com/ojAnK6i.jpg
http://i.imgur.com/nY1Q9Uo.jpg
http://i.imgur.com/TVqYYqD.jpg
http://i.imgur.com/T3hBF2F.jpg

Great DIY im not a fan of the chrome . Maybe look better in black.

MightyM
01-22-2015, 08:15 PM
Hmm, I'll take that as a compliment! It's actually polished aluminum. My engine bay Has plenty of this beautiful lightweight material as well as my the interior so I think it goes very well with the flow of things!

atank
01-22-2015, 09:08 PM
^^Hows the light output on those......

MightyM
01-22-2015, 10:19 PM
It's much better than the old h3 build set up... I'm using a Hella 90mm housing that utilizes an h9 bulb. It's designed to be a high beam. My next move will be to install some nice crystal white PIAA bulbs to get the most out of these.

atank
01-22-2015, 10:36 PM
^^ I think you did a good job on those lights!!!

MightyM
01-22-2015, 11:45 PM
Thanks atank, props to your runabout! I'm diggin the clean and polished work you've done. Tingles my sences...

Tacky
01-24-2015, 09:49 AM
The Miata is a new toy for me, and of course, it was not as good as the PO said it was. In his defense, I don't think he knew.
It got a new Exceedy clutch, rear main and trans input seals, new upper and lower shift boots, and a nice leather boot from Topgaiters, New tires, General Altimax HP's, Oh, and new wiper blades. And it is snowy out, still waiting to drive it after the clutch install.

kung fu jesus
01-24-2015, 09:54 AM
Keep those drain channels in the door sills clean. Road salt gets in there and rust starts pretty quickly.

Phatmiata
01-24-2015, 09:57 AM
I was going to wait till it got here, but I'm too excited! RS-Products is coming out with a new AC panel and I have one on the way as soon as they release. Here's some pictures!
13308
13309

Wow that is nice, it looks retro and kinda techie at the same time. I like it

Imontalto
01-24-2015, 10:02 AM
^^ I'm excited beyond words to get it in person. I may even see if Adam can create a matching gauge set.

Phatmiata
01-24-2015, 10:03 AM
http://i.imgur.com/WhbqYpo.jpg
http://i.imgur.com/ojAnK6i.jpg
http://i.imgur.com/nY1Q9Uo.jpg
http://i.imgur.com/TVqYYqD.jpg
http://i.imgur.com/T3hBF2F.jpg

wow this is really nice work!! Did you make the light buckets too?

also what front grill is that you have? I have one in my garage and don't know who makes them, its been sitting on a shelf for 10 years now :fp:

Phatmiata
01-24-2015, 10:08 AM
^^ I'm excited beyond words to get it in person. I may even see if Adam can create a matching gauge set.

I have the old style shown here

http://u.jimdo.com/www57/o/s467013bcac9182d1/img/i132e079455f32c91/1341816391/std/クラシックa-cパネル-シルバー.jpg


but I really like that new version you have, it is not even showing on there website?


EDIT: Nevermind, its not showing on their English page, but I did find it on their Japanese domestic page :bow:

Imontalto
01-24-2015, 10:19 AM
I have the old style shown here

http://u.jimdo.com/www57/o/s467013bcac9182d1/img/i132e079455f32c91/1341816391/std/クラシックa-cパネル-シルバー.jpg


but I really like that new version you have, it is not even showing on there website?


EDIT: Nevermind, its not showing on their English page, but I did find it on their Japanese domestic page :bow:

Yeah, I was attempting to order the old style from Rev9 but RS stopped production on them, so I opted to wait for the new one. I also have Maxime trying to get the matching hazard switch panel to put on my set of Adam's switches. I like the aspect of the AC light and think it will go really well with the KG Works-esque panel I have.

Slampen
01-24-2015, 10:29 AM
13320

13321

13322

13323

Phatmiata
01-24-2015, 11:16 AM
very nice is that the Nickel finish? and why 7 boxes? buy extra set or something?

Phatmiata
01-24-2015, 11:17 AM
Yeah, I was attempting to order the old style from Rev9 but RS stopped production on them, so I opted to wait for the new one. I also have Maxime trying to get the matching hazard switch panel to put on my set of Adam's switches. I like the aspect of the AC light and think it will go really well with the KG Works-esque panel I have.

Well if you want the old style I still have it, but I will defiantly be looking into that newer style

brontosaurus
01-24-2015, 11:46 AM
Do you have the old black style?

Phatmiata
01-24-2015, 11:52 AM
Do you have the old black style?

no just the brushed version, its new in the box, ill probably sell it once I get that newer version

wannafbody
01-24-2015, 12:28 PM
Vinyl seat covers

Slampen
01-24-2015, 02:21 PM
very nice is that the Nickel finish? and why 7 boxes? buy extra set or something?
'
Yes its Nickel in 15x8.


I'm waiting for the last two boxes, they should arrive with next shipment the freight company has from USA. That should be next week.
9 boxes, since one set for a friend of mine and one set for me, and one wheel spare...

Malibu Q
01-29-2015, 02:15 AM
Got some dress up parts for my NA8 motor this week from two different local (Australian) sources.
The ARC airbox has been home made covered with silver tape, presumably to insulate it.

https://farm8.staticflickr.com/7396/16206215218_54ce8d854e_o.jpg

KAL
01-29-2015, 04:34 AM
http://redrs.com/wp-content/uploads/2014/06/6327-acura-integra-momo-mod-78-wheel.jpg

Dream wheel. Momo 78, for track days.

Malibu Q
01-29-2015, 04:56 AM
Norway is owning this page.

Nice wheels.
Don't forget to always wear gloves with a suede wheel.
Seen some horrible greasy things around here.
I've taken mine off for the summer.

KAL
01-29-2015, 05:08 AM
Yeah, I've got gloves and a nice Momo D35 in the car for dailying. Sold my old suede Key!s with the car, had to have a new one.

Cermivelli
02-01-2015, 09:29 AM
https://farm8.staticflickr.com/7442/16388331091_a9b4d7b30d_b.jpg (https://flic.kr/p/qYbtSB)Kg Works shiftknob (https://flic.kr/p/qYbtSB) by cermivelli (https://www.flickr.com/people/41285140@N00/), on Flickr

https://farm8.staticflickr.com/7437/15770068423_c88e552c43_b.jpg (https://flic.kr/p/q2xHVr)Autoblaze Nakamae (https://flic.kr/p/q2xHVr) by cermivelli (https://www.flickr.com/people/41285140@N00/), on Flickr

Dug up some old posts about the Autoblaze window trim on Google. So thrilled to see it was considered the holy grail of JDM parts 13 years ago already! It seems nowadays everyone seems to have forgotten about it.


1st April 2005, 22:09 #1
The Blue Potato
Fifth gear

Join Date: Mar 1999
Location: 1995 #001 Pitcrew Conversion, RS Aizawa IRTB\'s, HKS F-con, Road&Ster Inspired.
Posts: 2,862

While flipping through the new #42 of this great publication,there are many new exterior/interior items that jumped out at me:

1) While this one has been elusive as the honored Stainless Steel window frame that Autoblaze used to make, S2 Racing has re-introduced a set of RX7 FD3S driving/turn-signal lamps-called the "Zero One.".



26th June 2002, 19:13 #8
neumann
Fourth gear

Join Date: Jan 2000
Location: Jacksonville, FL 91 Silver
Posts: 1,511

I want that !!!!!!!

Looks great on your car. Maybe I'll have a chance to see it in person in a couple of weeks when I am in San Diego.

Quote:
Originally posted by Nevadabob:
Check out my profile and you can see the Autoblaze unit installed on my red '90.

It is a very nice piece. Chromed on both sides. It is affixed with double-stick tape and has been on "Red Dwarf" for four years.

The purchase price was over $300, but I got it from the Miata.net classifieds for $75. It took a year to get the courage up to put it on.

Anthony aka Nevadabob

26th June 2002, 22:39 #9
The Blue Potato
Fifth gear

Join Date: Mar 1999
Location: 1995 #001 Pitcrew Conversion, RS Aizawa IRTB\'s, HKS F-con, Road&Ster Inspired.
Posts: 2,862

This is the holy grail of all Japanese parts. The only think you can do to even come close is to use mirror chromed vinyl which they have been using in Japan for some time now.

Here is another shot of the Autoblaze frame

-Peter


23rd April 2002, 23:05 #19
Leni Metro
Third gear

Join Date: Oct 2000
Location: Petaluma, CA
Posts: 405

Autoblaze quit making the vent window kits a few years ago. They also made polished kits for the windshield header that is to die for. I been searching for this part (new or used) for 4 years now...Anyone out there with the header kit?

24th April 2002, 01:07 #20
ccheung
Second gear

Join Date: Aug 2000
Location: Hercules, CA, USA, 91\'B 1.8
Posts: 160

Leni:

I have been looking for the Autoblaze Windsheild frames for a long time as well to no avail. However, somebody was selling one in Japanese yahoo auction last week but it only had to top frame and it was well used. Keep your eyes opened @ yahoo auction, you may have your luck there.

brontosaurus
02-01-2015, 12:36 PM
http://i.imgur.com/zQI2EeH.jpg

Phatmiata
02-01-2015, 01:03 PM
I was wondering who used the Buy it Now, nice score man!! :bow:

brontosaurus
02-01-2015, 01:15 PM
Thanks :)

That autoblaze trim is killer! Looks to be in awesome shape. Get it installed!

Cermivelli
02-01-2015, 01:30 PM
Will do, as soon as my engine is back in! It does look good. The quality is so much better than the chromdesign (plastic) surround. Uncomparable!

Beautiful AWD surround by the way, and thank you again for the heads up for the KG works shiftknob! :)

Dave737
02-01-2015, 10:54 PM
Plz post pix when you get that grill installed Cermivelli.

JamieH
02-02-2015, 01:39 PM
http://i.imgur.com/KpPhRnE.jpg

Phatmiata
02-02-2015, 01:46 PM
I see your shipping cost $28 and 1 item at $150 but what's in the box Jamie??

RustRat
02-02-2015, 02:19 PM
So, well, time for my first official post. Among other stuff, today I purchased a used Personal Grinta steering wheel, and a used and abused Cusco lower brace (can't remember exactly what it is called in Enlish, so if you know, please enlighten me)
http://i.imgur.com/6aXIbj0.jpg
http://i.imgur.com/Vzhm6AQ.jpg

JamieH
02-02-2015, 02:19 PM
The man asked,

http://i.imgur.com/TkfDZPl.jpg

I guess I better deliver.

http://i.imgur.com/qHPjIfw.jpg

Phatmiata
02-02-2015, 03:12 PM
that Cusco brace has some serious battle damage, is that the forward brace? get some pictures installed!! ! :slayer:

Phatmiata
02-02-2015, 03:14 PM
Nice, a legit Zoom Feul Rid (best accent) Even comes with the J-Spec polish !! Now time for installed pics!! :bow:

brontosaurus
02-03-2015, 08:42 AM
Sure thing Cermivelli! Happy to help.


http://page11.auctions.yahoo.co.jp/jp/auction/n139950483

Holy shit. Either NB AWD stuff is carrying s huge premium or my into the blue gauges just got a ton more valuable.

Phatmiata
02-03-2015, 09:06 AM
http://page11.auctions.yahoo.co.jp/jp/auction/n139950483

Holy shit. Either NB AWD stuff is carrying s huge premium or my into the blue gauges just got a ton more valuable.

Yeah I was watching that auction this morning.

The parts in that auction that bring the premium are the Limited Edition Thick Gauge Rings that Dewa-san made. IIRC he had 3 versions, and they all had the glass inserts on the NA, not sure about NB though. When new they cost about $300+ for the set of rings w/glass, and he only had them available on his site for a short time. Once he sold out he never made them again.

After demand surfaced again RS-Refine starting make their own version, mostly on a limited basis too, but with polycarbonate lens. (I was on the 2nd and 3rd group buy).

brontosaurus
02-03-2015, 09:35 AM
Ah thanks, i knew it had rings, but didn't realize what they were. We need a fourth GB :)

Phatmiata
02-03-2015, 09:57 AM
Ah thanks, i knew it had rings, but didn't realize what they were. We need a fourth GB :)

After the 3rd group buy one of the members from CR made direct copies from taking the measurements of a set they ordered in the group buy. Needless to say that really pissed off the owner of RS-Refine so bad that when he found out, he then posted about the copies and how he wont deal with the USA again, and then he started ignoring emails about a 4th group buy, so good luck with that.

richterat83
02-03-2015, 10:56 AM
Flyin Miata stage I clutch along with all gaskets to be replaced while it's apart, upper and lower shifter boot insulation, shifter insulation, new stock pedal covers, and bluetooth module for the Megasquirt

Imontalto
02-03-2015, 05:53 PM
Got the new RS-Products HVAC panel!
13388
However, in a bit upset that there will be no light shown through it at night :/
13389

KAL
02-03-2015, 06:28 PM
A bit upset about the lack of light on mine too (old version from YJP). I don't mind less light at night, but it feels kinda cheap, especially since the typography and graphics are awesome!

KAL
02-04-2015, 04:48 AM
https://dl.dropboxusercontent.com/u/13710076/miata/ratt1-1.jpg

https://dl.dropboxusercontent.com/u/13710076/miata/ratt1.jpg

https://dl.dropboxusercontent.com/u/13710076/miata/ratt3.jpg

Phatmiata
02-04-2015, 06:31 AM
Got the new RS-Products HVAC panel!
13388
However, in a bit upset that there will be no light shown through it at night :/
13389



A bit upset about the lack of light on mine too (old version from YJP). I don't mind less light at night, but it feels kinda cheap, especially since the typography and graphics are awesome!


Hummmm I had not thought about that, ill have to take my old version down from the for sale section and compare the 2 versions to see what I like best.

Also in speaking with them earlier this week they only have a couple of the older versions left in stock for those interested.

KAL
02-04-2015, 08:49 AM
https://dl.dropboxusercontent.com/u/13710076/miata/felg-1.jpg

https://dl.dropboxusercontent.com/u/13710076/miata/felg-2.jpg

https://dl.dropboxusercontent.com/u/13710076/miata/felg-3.jpg

Imontalto
02-04-2015, 11:00 AM
Hummmm I had not thought about that, ill have to take my old version down from the for sale section and compare the 2 versions to see what I like best.

Also in speaking with them earlier this week they only have a couple of the older versions left in stock for those interested.

I went to order through Rev9 and they said that the 1st version was officially out of production :/ Hence why I went for the new one.

freedomgli
02-04-2015, 11:16 AM
KAL, nice Volk Racing GR-N wheels you got there.

Phatmiata
02-04-2015, 11:43 AM
I went to order through Rev9 and they said that the 1st version was officially out of production :/ Hence why I went for the new one.

Maybe they already sold out then. I can check if you want?

DonPlatt
02-04-2015, 11:48 AM
got a m45 supercharger for my 97. Got a voodoo box for fuel and a msd for retarding the timing. Ready to get started, but I have a tank full of regular gas. I can't siphon it out. If I pop the drain plug I'll have gas every where.....help

Phatmiata
02-04-2015, 11:51 AM
got a m45 supercharger for my 97. Got a voodoo box for fuel and a msd for retarding the timing. Ready to get started, but I have a tank full of regular gas. I can't siphon it out. If I pop the drain plug I'll have gas every where.....help

Just get some octane booster from the local Auto parts store

or order it online
http://www.amazon.com/Turbo-108-Octane-Boost-oz/dp/B00086I5XA

http://ecx.images-amazon.com/images/I/314Egzl080L.jpg

KAL
02-04-2015, 02:19 PM
KAL, nice Volk Racing GR-N wheels you got there.

Thanks! My first set of wheels from YJP (not the last).

kung fu jesus
02-04-2015, 05:20 PM
I bought this today for the pending return of my NA...

13393

JamieH
02-04-2015, 08:23 PM
Don't forget a white helmet for the full The Stig effect.

kung fu jesus
02-04-2015, 08:40 PM
White helmet to stay cooler, really. The suit is a bit different than the one they put on the Stig. I really don't like the Simpson Super Bandit helmet either. Not a fan of the vision field and venting. We are in a transition year for helmet standards, so while I *might* get a new SA2010 helmet, I am contemplating just waiting until October and get something I really like. I sampled some great CF helmets while in Charlotte.

JamieH
02-04-2015, 09:38 PM
Meh, so it has some blue and red on it. You can be American Stig.

brontosaurus
02-04-2015, 10:30 PM
http://64c162442026ed407fea-97b288b6e6fd7a6d6cbc143cab5dddce.r18.cf1.rackcdn.c om/catalog/product/cache/1/image/540x/9df78eab33525d08d6e5fb8d27136e95/v/o/vortex_band_white_15.png

Slampen
02-04-2015, 10:48 PM
Thanks! My first set of wheels from YJP (not the last).

Excitied about your coilovers. :slayer:

treeafodo
02-04-2015, 10:49 PM
This was my most recent purchase for the car.
https://farm8.staticflickr.com/7535/15722650424_f03b3ba6d6.jpg (https://flic.kr/p/pXmGcJ)LS1 Longblock (https://flic.kr/p/pXmGcJ) by Austin Rajki (https://www.flickr.com/people/98882003@N04/), on Flickr

JamieH
02-04-2015, 10:57 PM
http://media.giphy.com/media/FoUHKTJhoQU6I/giphy.gif

kung fu jesus
02-05-2015, 06:14 PM
New tahrs for the track! (old bald RE-11s on left)

13397

kung fu jesus
02-06-2015, 01:00 PM
I was going to wait until October, but I found a terrific deal on this CF helmet (SA2010), so I can migrate towards better saftey gear.

13401

treeafodo
02-08-2015, 01:58 PM
Got some go fast things today.
https://farm8.staticflickr.com/7446/15855543293_af54a63ec7.jpg (https://flic.kr/p/qa6NC6)Boxes (https://flic.kr/p/qa6NC6) by Austin Rajki (https://www.flickr.com/people/98882003@N04/), on Flickr

KAL
02-11-2015, 06:21 AM
http://i.imgur.com/KK8UB52.jpg

http://i.imgur.com/eZhZKiw.jpg

atank
02-11-2015, 11:38 AM
Those are going to look great^^^^

KAL
02-11-2015, 11:41 AM
My friend had the same set in his car, looks really great. Though, i'm not completely sold on them — a bit too retero for my car. Maybe.
Friends dash:

http://i.imgur.com/6dI8iaE.jpg

AustinH48
02-11-2015, 10:16 PM
13432

I also have Koni yellows going on with those Teins. I'm very excited!

KAL
02-12-2015, 06:35 AM
https://dl.dropboxusercontent.com/u/13710076/miata/IMG_2263.JPG

RustRat
02-12-2015, 02:42 PM
I will post photos once installed, still haven't got anytime, Phat.

Meanwhile, this happened.

13438
(Sorry for the crappy photo)
The guy in the shop I do the most stuff for my car, had some stuff left over from a crashed Miata, and wanted to empty some space, so I got all of the tan carpets, black/tan dash, armrest, side sill covers and some misc tan plastic pieces REALLY cheap.

I really like them, but since I have a red '97 NA, I'm in a dilema: I really like the retro looks of, let's say, Revlimiter's Sharka, but I think NBFL's interior is classier and more modern.

Should I sell this stuff, and buy a pre-94 NA dash and black carpet, or stick with the NBFL stuff?

HALP! (Maybe I should start a build thread, also)

Phatmiata
02-12-2015, 06:26 PM
NB dash is sexy but has modern styling and feel.

if you want retro then 1.6L Dash is the way to go IMHO

JamieH
02-13-2015, 07:35 PM
Runabout M2 mirrors.

http://i.imgur.com/TaYy0ka.jpg

wannafbody
02-13-2015, 08:16 PM
46mm bumpstops

mx54life
02-23-2015, 06:46 PM
Ran across this abandoned/discontinued BBK that uses an 11" Corrado disc and uses a Wilwood dynamite/dynapro calipers for......ready? $100 shipped. The owner found this at the trunk of the car he bought but I guess already have a BBK on it. It did not come with the calipers so it is still a project but FWIW.....

http://i1284.photobucket.com/albums/a578/ebaradas/IMG_1933_zpsoaqjlhcg.jpg (http://s1284.photobucket.com/user/ebaradas/media/IMG_1933_zpsoaqjlhcg.jpg.html)

Fits pretty well actually and probably be good enough for street application and bragging rights lol.
http://i1284.photobucket.com/albums/a578/ebaradas/IMG_1934_zpsnbijldw9.jpg (http://s1284.photobucket.com/user/ebaradas/media/IMG_1934_zpsnbijldw9.jpg.html)

Lococholo84
03-02-2015, 01:33 AM
http://i1212.photobucket.com/albums/cc451/juan_perez8/20150301_172228_zps7xrnmev_edit_1425257662946_zpsi ysls8ih.jpghttp://i1212.photobucket.com/albums/cc451/juan_perez8/20150301_172124_zpsabjwcaf_edit_1425257484163_zpsg uvivkct.jpg (http://s1212.photobucket.com/user/juan_perez8/media/20150301_172228_zps7xrnmev_edit_1425257662946_zpsi ysls8ih.jpg.html)
Got a Racingbeat header and a magna flow cat.

Tkblazer
03-12-2015, 12:10 AM
Sold my rotiforms, which thankfully went to a good home. New wheels should be shipping sometime soon I hope!

MightyM
03-12-2015, 12:28 AM
wow this is really nice work!! Did you make the light buckets too?

also what front grill is that you have? I have one in my garage and don't know who makes them, its been sitting on a shelf for 10 years now :fp:

Thanks! It was a labor of love and totally worth doing.
I had to gut out the original bracket to fit and weld in the new adjustment brackets for the housing so the frame is the original but would not be able to go back to original dual lights. I'm not sure on the brand of grill either... It was on the car when I bought it. I think the last I saw one of them for sale was when RavenWing Performance was still around. That was about the time I was tinkering around with my first Miata. It's been a while!

wannafbody
03-13-2015, 05:35 PM
Cibies

Lococholo84
03-13-2015, 11:22 PM
http://i1212.photobucket.com/albums/cc451/juan_perez8/20150317_094928_zpsaq5vbuw_edit_1426608728848_zps0 t1ss0n3.jpg (http://s1212.photobucket.com/user/juan_perez8/media/20150317_094928_zpsaq5vbuw_edit_1426608728848_zps0 t1ss0n3.jpg.html)
small update removed charcoal canister and added a flying miata strut bar and a garge star oil cap.

bogaut
03-14-2015, 12:58 AM
13745

nielex hazard switch!

BoBo
03-14-2015, 03:31 AM
^^Tight^^ Where did you pick those up?

Red it is.
13279
Lots of orange peel and a little deeper than the 24 year old paint but I like.
I got the paint from this place, I'm no painter but I think it is really good stuff.

http://www.automotivetouchup.com/touch-up-paint/mazda/1991/miata/
That's where I get my paint. Their Montego Blue paint matches well with my Montego Blue original paint which is hard to match.

Demon I Am
03-14-2015, 08:43 AM
Sold it

Tkblazer
03-16-2015, 11:27 PM
Got a sample book of avery supreme wrap.. Thinking of going with one if these colors

13777

Dave737
03-17-2015, 04:58 PM
You going to wrap the whole car? Show us some in the process of install pix if you get the chance.

Got Rubber?
http://i.imgur.com/xFXPM6Zh.jpg

Tkblazer
03-17-2015, 08:17 PM
Ya I have some other maintenance to do first like replacing both rear hubs and bearings. After my new wheels and tires come in, I'll order some vinyl

JamieH
03-17-2015, 09:31 PM
http://i.imgur.com/X0WN0jW.jpg

Came in yesterday.

Travyss
03-18-2015, 09:28 AM
Let's see.

My big project so far in 2015 was to redo my brakes. I had one "stuck" caliper up front, and one leaky rear caliper. Thus I snagged a used set (Front and Rear) and had the calipers powder coated black. Rebuilt all four corners, and upgraded rotors, pads, lines and fluid. Was definitely one of the more fun jobs I've done on the car.

lowandrusty
03-26-2015, 08:29 AM
This just arrived yesterday. Probably the most exciting thing I've purchased for the rust bucket so far.

This is just a mock up, since I don't have Megasquirt yet.
https://farm9.staticflickr.com/8703/16724285777_f28984dd1b_o.jpg

Detail of the linkage mechanism
https://farm9.staticflickr.com/8729/16743949838_aa33ee0734_o.jpg

One of the runners.
https://farm9.staticflickr.com/8733/16744188210_311ac60980_o.jpg

So excited to finally own one of these ITRB setups!
https://farm8.staticflickr.com/7612/16744174600_fdce7c8d9a_o.jpg

https://farm9.staticflickr.com/8703/16309230884_51f37f8703_o.jpg

RustRat
03-26-2015, 11:58 AM
Nothing big or interesting, just ordered a red Ultralite key from the dude in Finland.

I have a question though, regarding car electronics. Any one kind enough to suggest me a proper thread/section to post it?

Martin
03-26-2015, 12:40 PM
You may ask anything here: http://mazdaroadster.net/forumdisplay.php?113-ASK-MAZDA-ROADSTER

MightyM
03-26-2015, 11:09 PM
Finally finished up my DIY power window and hazard switches. Polished to perfection!! Also got the vent rings! Lots of great inspiration from all the beautiful interiors on this forum.
http://i.imgur.com/ZVTEVFi.jpg
http://i.imgur.com/4rkmg5m.jpg
http://i.imgur.com/jvT1NnQ.jpg

jdm slick
03-27-2015, 12:09 AM
Got me a set of Joyfast valve cover hex bolts from Rod http://www.TetsuyaGarage.com today...

bada55mofo
03-27-2015, 09:23 AM
I got this lovely example of a trunk lid for mine, needs lots of love!!

13841

Phatmiata
03-27-2015, 11:28 AM
new Gauge hood for my Miata came in from http://www.RealMazdaParts.com :slayer:


Cheaper than Rosenthal, and Fast shipping too !

http://i.imgur.com/EGQrPH0.jpg

Tkblazer
03-28-2015, 12:33 AM
Finally got a new fuel lid to replace the moss one that came on my car when I bought it. I've always like the type 2 lid since the bolts on it tie in with the stainless Allen bolts I used on my flares.

Hopefully I have another package arriving next week which should be equally shiny

13842

Dave737
03-29-2015, 03:52 AM
^^lovely simply lovely

13844