RoadsterTech
09-22-2013, 05:21 PM
I have just finished the blanking plate for the late model NA8 with the Double Din opening.
Notice that the plate covers the outside lip of the Tombstone giving an OEM like appearance.
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-Wd6wgdn/0/L/CA_09221317375613-L.jpg
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-jQpfhwG/0/L/CA_09221317371265-L.jpg
This allows RoadsterTech to provide you with 1 DIN or 2 DIN plates for the late model NA8's and 1/2 height or full height blanking plates for the NA6's and early NA8's.
Compare these to the NA6 Tombstone:
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-hCS5hDt/0/L/blanking%20plate-L.jpg
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-jS7m5cd/0/L/no%20recess-L.jpg
We can also provide you with NA6 / Early NA8 1/2 height Blanking plates for use with the OEM Radio.
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-L9WMVLZ/0/L/CA_09151311484617-L.jpg
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-JHQbvTc/0/L/CA_09031316594125-L.jpg
Here is a shot of the 3 hole gauge plate with recessed holes:
http://rabrillhart.smugmug.com/Other/Miata/i-wtZ4SG8/0/L/CA_06041300051972-L.jpg
http://rabrillhart.smugmug.com/Other/Miata/i-jPTQKf3/0/L/CA_06041300034513-L.jpg
The 1 DIN NA8 plate may be used in either the Top or Bottom of the Tombstone.
The half height plate for the NA6 and early NA8's must be ordered either as a top mount or bottom mount unit.
All of the plates made out of Marine Grade HDPE with UV inhibitors. This is the stuff that is used to make boat consoles. The plates are machined on our Gantry Router to +/- .1mm Tolerance. These are extremely ridged, are an exact fit onto the Tombstone and surpass the quality of similar products on the market today. Best of all you don't have bolts sticking out of the front of the blanking plates like a few of our competitors products have.
Of course we can provide you with either the patterned plastic or the Sand Blast Matte finish.
So... what are the prices:
NA6 / Early NA8
Blanking Plates:
1/2 Height Plate: $40.00
Top or bottom Plate for OEM Radio: $40.00
Full Height Plate: $48.00
Gauge Plates:
1/2 Height 1 hole Gauge Plate: $41.00
1/2 Height 2 hole Gauge Plate: $44.00
1/2 Height 3 hole Gauge Plate: $47.00
Recessed / Angled Gauge Plates:
1/2 Height 1 hole Gauge Plate: $43.00
1/2 Height 2 hole Gauge Plate: $47.00
1/2 Height 3 hole Gauge Plate: $50.00
Late Model NA8
Blanking Plates:
1 DIN Late Model NA8 plate: $38.00
2 DIN Late Model NA8 plate: $46.00
Gauge Plates:
1 DIN 1 hole Gauge Plate: $41.00
1 DIN 2 hole Gauge Plate: $44.00
1 DIN 3 hole Gauge Plate: $47.00
Recessed / Angled Gauge Plates:
1 DIN 1 hole Gauge Plate: $43.00
1 DIN 2 hole Gauge Plate: $47.00
1 DIN 3 hole Gauge Plate: $50.00
Shipping will be $6.00.
Florida residents will need to include Florida Sales Tax.
Notice that the plate covers the outside lip of the Tombstone giving an OEM like appearance.
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-Wd6wgdn/0/L/CA_09221317375613-L.jpg
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-jQpfhwG/0/L/CA_09221317371265-L.jpg
This allows RoadsterTech to provide you with 1 DIN or 2 DIN plates for the late model NA8's and 1/2 height or full height blanking plates for the NA6's and early NA8's.
Compare these to the NA6 Tombstone:
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-hCS5hDt/0/L/blanking%20plate-L.jpg
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-jS7m5cd/0/L/no%20recess-L.jpg
We can also provide you with NA6 / Early NA8 1/2 height Blanking plates for use with the OEM Radio.
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-L9WMVLZ/0/L/CA_09151311484617-L.jpg
http://rabrillhart.smugmug.com/Other/RoadsterTech/i-JHQbvTc/0/L/CA_09031316594125-L.jpg
Here is a shot of the 3 hole gauge plate with recessed holes:
http://rabrillhart.smugmug.com/Other/Miata/i-wtZ4SG8/0/L/CA_06041300051972-L.jpg
http://rabrillhart.smugmug.com/Other/Miata/i-jPTQKf3/0/L/CA_06041300034513-L.jpg
The 1 DIN NA8 plate may be used in either the Top or Bottom of the Tombstone.
The half height plate for the NA6 and early NA8's must be ordered either as a top mount or bottom mount unit.
All of the plates made out of Marine Grade HDPE with UV inhibitors. This is the stuff that is used to make boat consoles. The plates are machined on our Gantry Router to +/- .1mm Tolerance. These are extremely ridged, are an exact fit onto the Tombstone and surpass the quality of similar products on the market today. Best of all you don't have bolts sticking out of the front of the blanking plates like a few of our competitors products have.
Of course we can provide you with either the patterned plastic or the Sand Blast Matte finish.
So... what are the prices:
NA6 / Early NA8
Blanking Plates:
1/2 Height Plate: $40.00
Top or bottom Plate for OEM Radio: $40.00
Full Height Plate: $48.00
Gauge Plates:
1/2 Height 1 hole Gauge Plate: $41.00
1/2 Height 2 hole Gauge Plate: $44.00
1/2 Height 3 hole Gauge Plate: $47.00
Recessed / Angled Gauge Plates:
1/2 Height 1 hole Gauge Plate: $43.00
1/2 Height 2 hole Gauge Plate: $47.00
1/2 Height 3 hole Gauge Plate: $50.00
Late Model NA8
Blanking Plates:
1 DIN Late Model NA8 plate: $38.00
2 DIN Late Model NA8 plate: $46.00
Gauge Plates:
1 DIN 1 hole Gauge Plate: $41.00
1 DIN 2 hole Gauge Plate: $44.00
1 DIN 3 hole Gauge Plate: $47.00
Recessed / Angled Gauge Plates:
1 DIN 1 hole Gauge Plate: $43.00
1 DIN 2 hole Gauge Plate: $47.00
1 DIN 3 hole Gauge Plate: $50.00
Shipping will be $6.00.
Florida residents will need to include Florida Sales Tax.