V8Roadsters
09-23-2013, 10:25 AM
Miata Fender Braces NA+NB
Price = $235
The next best thing to seam welding. Stiffen the uni-body in all aspects. The cowl stabilizers braces join the thinner fender material into the stout core of the uni-body via four locations. Using square tubing which offers the best torsion stiffness via uniform geometry and larger cross sectional area. Yielding in better tension and compression than plate and rectangular styles. This while offering the lowest weight to strength ratio. The main tube running for the lower door hinge, the stiffest area of the uni-body, to the upper mounting point of the fender. The triangulation built into the center of the brace transfers load across the entire section of the fender area. The braces are keep close to the chassis to help eliminate flexing between the four mounting locations.
- Square tubing design
- Laser cut and CNC formed mounting areas
- TIG and MIG welded
- Red powder coated
- Hardware included
- Lightweight design 3lbs
Fenders will need to be removed for installation. Fits both NA and NB models.
ORDER NOW !!!!
----> http://www.v8roadsters.com/cowl-stabilizer-braces/
photo of NB Application
http://farm4.staticflickr.com/3788/9779909132_5e10d33f76_o.jpg
photo of NA Application
http://farm3.staticflickr.com/2849/9673351661_18b5fb120f_b.jpg
Price = $235
The next best thing to seam welding. Stiffen the uni-body in all aspects. The cowl stabilizers braces join the thinner fender material into the stout core of the uni-body via four locations. Using square tubing which offers the best torsion stiffness via uniform geometry and larger cross sectional area. Yielding in better tension and compression than plate and rectangular styles. This while offering the lowest weight to strength ratio. The main tube running for the lower door hinge, the stiffest area of the uni-body, to the upper mounting point of the fender. The triangulation built into the center of the brace transfers load across the entire section of the fender area. The braces are keep close to the chassis to help eliminate flexing between the four mounting locations.
- Square tubing design
- Laser cut and CNC formed mounting areas
- TIG and MIG welded
- Red powder coated
- Hardware included
- Lightweight design 3lbs
Fenders will need to be removed for installation. Fits both NA and NB models.
ORDER NOW !!!!
----> http://www.v8roadsters.com/cowl-stabilizer-braces/
photo of NB Application
http://farm4.staticflickr.com/3788/9779909132_5e10d33f76_o.jpg
photo of NA Application
http://farm3.staticflickr.com/2849/9673351661_18b5fb120f_b.jpg