PDA

View Full Version : 1997 Turbo Miata Part Out



blenderblast
12-04-2013, 11:23 AM
If you do not see something written down that you want, ask and we will go from there.
I will work with you on some of the prices. I will ship some things at buyers cost.

Coil Pack 1.8 OBDII - $100
center vent console - $30
center console - $25
Engine head - $400 Fully re-built head, less than 10,000 miles.
passenger door shell - $75 (dent, I'm sure you can get this out with a little TLC)
ECU ('96-'97) - $125
Injectors [all four] (from an '01-'05 purple tops) - $60
Fuel rail - $35
Steel hood - $80
4.1 Torsen - $650
rear finish panel $125
seat belts - $20 each
OEM Manual steering rack - $150
Steering wheel with airbag (came off a 36,000 mile Miata) - $50
Transmission '94-97 - $225
Trunk lid - $80 (needs better paint)
SOLDFront bumber (needs paint, as a little crack in mouth) - $80 SOLD
NB 15" five spokes with dunlop DZ101 80% tread life left - $300
Black cloth seats - $40 each
black carpet (has been cut where dash meets transmission tunnel) - $50
Koni Yellows w/ Racing Beat springs (30,000 to 35,000 miles on them) - $350
CAS '94-97 - $100
Exedy Stage 1 Clutch - $150 (30,000 to 35,000 miles on it)
SOLD Drivers door shell SOLD
SOLD Drivers fender SOLD


Turbo setup includes the following:
Garrett T25
HKS Manifold
Custom downpipe
Full custom exhaust w/ cat[not a kitten] (will specify if 3" all the way or not when I look tonight)
Bipes ACU unit http://www.bellengineering.net/templates/BEGi_6_5/images/Manuals/BipesACU.pdf
FM Voodoo Fuel Management http://www.flyinmiata.com/support/instructions/ecu/Voodoo_Box_new.pdf
Walbro 255 fuel pump
Intercooler (JDM ebay thing IIRC)
Plumbing for I/C
Mostly silicone couplings, I will throw in the ones I haven't put on.
s/s T-clamps
oil feed lines for turbo
Prosport boost gauge
s/s water lines
I may be forgetting a couple things. I'll edit when I start taking parts off.

I'm asking $1600 for the complete turbo setup. Price is OBO.
If you do not mess with the settings on the piggy backs, you'll have around 190whp/180ft/lbs. I just dyno-ed it a month or so ago. If you adjust the fuel pressure regulator and turn the pressure down a little, you can reach 200whp.


I'm sure that I've missed some things, when I start taking the car apart I will post stuff up and will post pictures. I'll take some shots of the car, engine bay and interior just so there are some pictures up here. I'll keep editing this post.
What parts I do not have up here, go ahead and ask and I'll price it the best I can.
If there are things up here that seem to be a little too pricey for what they are, please notify and I will adjust accordingly.


Here is the craigslist ad, has some pictures.
http://tampa.craigslist.org/hil/pts/4225821343.html

http://i.imgur.com/b7g8DIdl.jpg
http://i.imgur.com/udjuHrul.jpg
http://i.imgur.com/7Fj6xy0l.jpg
http://i.imgur.com/rgohoLal.jpg
http://i.imgur.com/KQGhcvpl.jpg
http://i.imgur.com/olCsOLyl.jpg
http://i.imgur.com/apXfkTfl.jpg

blenderblast
12-06-2013, 12:24 PM
I changed the turbo setup price to $1600, turbo needs a rebuild.
Price is OBO

blenderblast
12-06-2013, 11:08 PM
I've edited post with links to the manuals of the Bipes ACU and FM Voodoo Box.

Bipes ACU will only work for years 1990-1997
FM Voodoo Box will work with NAs and NBs

Suspension is pending sale.
dirveshaft and axle shaft are pending sale.

MANAEUNOS
12-29-2013, 07:50 PM
Will you sell the springs separately?
If so how much.
Will need it shipped to MA, 02131 PM me please

blenderblast
12-31-2013, 12:36 AM
Suspension is sold. I'll update this thread tomorrow with what has been sold.

DonPlatt
02-01-2015, 02:21 AM
Do you still have the Bipes ACU? I'm interested email culldesak@yahoo.com

richterat83
02-12-2015, 08:56 AM
Got a gas cap? (Screw in not the outer lid)