Left0verCurry
01-01-2014, 03:50 PM
I've been trying to install a radio for sometime now but always put it off because my wiring harness was cut by PO. After some research, I decided on installing just an aftermarket amp and using my ipod. But before I do that i wanted to remove the a/c controls to access the bose amp below it. Below are the two (of three) cable wires that need removing in order for me to pull out the HVAC controls. Any tips on removing this would help alot.
http://farm4.staticflickr.com/3804/11693924186_24eeb1f55c_o.jpg
I've read people removing them without any trouble, so i must be doing something wrong. Also just for confirmation, is the circled portion in the pic below the connector for the bose amp? I figured that I should at least unplug the unit in the meantime.
http://farm8.staticflickr.com/7332/11693144235_d7bff41afc_o.jpg
Thanks in advance!
http://farm4.staticflickr.com/3804/11693924186_24eeb1f55c_o.jpg
I've read people removing them without any trouble, so i must be doing something wrong. Also just for confirmation, is the circled portion in the pic below the connector for the bose amp? I figured that I should at least unplug the unit in the meantime.
http://farm8.staticflickr.com/7332/11693144235_d7bff41afc_o.jpg
Thanks in advance!