Printable View
Tried of the exposed screw heads on your NA tombstone? For a few bucks you can dress them up.
You'll need to replace the original screws with flat top screws, those I used were about the same length.
Simply remove old screw, thread on cover caps, reinstall screws. Tighten! (see pics) You can find
the caps just about anywhere in many colors.
Search: Hinged Screw Cover Caps Washer Flip Tops on browser
Attachment 20840
Attachment 20841
Very cool tip. :bow:
I LIKE!!!
like mine on the Zoom Engineering tombstone and centre console
https://live.staticflickr.com/4805/3...bdbc5574_h.jpg20181230_102116 by marlonmercado77, on Flickr
https://live.staticflickr.com/7853/4...bdafd50d_h.jpgP1280077 by marlonmercado77, on Flickr
I've used those plastic caps in lots of other locations and NEVER thought to use them there!
Hi Marlon,Quote:
Originally Posted by marlonthegreat
Just a bit off topic, but your ZOOM engineering centre console with the centre cubby, i know that the centre armrest part opens straight up as opposed to the OEM cubby opening from the side, my question is, does the armrest open ALL the way up? or only part way?
All/most the way up, iirc, it wasn't exactly vertical but close. May want Marlon or other current Zoom Engineering cc owner to confirm, Steve, as it has been 2.5+yrs since I touched one. ;)
yes it opens all the way up but you'll have to hold it to keep it open otherwise it will drop down because of its weight