Pitcrew part out: JDM and other high quality parts!
email xcoldricex@gmail.com for fastest responses.
Shipping costs additional from Austin, TX. Pickups welcome.
Paypal GIFT, Square Cash, or Venmo.
Additional images: https://imgur.com/a/XDTQY
https://i.imgur.com/Fm8ZdaU.jpg
https://i.imgur.com/8uw524S.jpg
Trackspeed Dual Core Race Radiator with FM lower silicone hose used 1k miles on street car $450
https://i.imgur.com/0e2VUix.jpg
Motolita leather steering wheel and polished hub, Lecarra billet horn button, revlimiter custom Mazda horn graphic. $380
OEM Mudguards $80
Garagestar Handbrake $55
Aluminum HVAC knobs $90
https://i.imgur.com/np7O7Tt.jpg[
Modified Bob Boig road race header with Artech Custom 3" Vband exhaust with Magnaflow muffler, modified with flex pipe $old
Beatrush Aluminum radiator Panel $95
INTERIOR:
https://i.imgur.com/2HMj37j.jpg
Nakamae Diamond Quilted trim set, Black with white stitching - $450
Includes the following pieces:
-Lower package tray
-Sidesteps
-Transmission tunnel
https://i.imgur.com/P6cH4oT.jpg
Checkered Cocomats, super high quality - used less than 1k miles $180
https://i.imgur.com/s4AB2Uu.jpg
* JDM McIntosh double din radio Subaru CD and tape deck in a DDMworks custom double din adapter - never mounted $480
RARE RCA out, FM adapter (RCA out only avail on JDM version). DDMworks adapter was $150 alone
https://i.imgur.com/m91turC.jpg
Autokonexion ver 1.5 ducktail trunk $400
This is the version 1.5 that has been discontinued by Autokonexion. the 3rd brake light completely shaved off for a cleaner look.
http://imgur.com/fw1ZKZq.jpg
Hard dog Double Diagonal HC Stainless polished Roll bar $950
The Hard Dog bar is no longer produced, they told me they would reproduce one for $2500. I will need to uninstall the bar, so I will need some lead time after purchase.
https://i.imgur.com/MXOHsLm.jpg
*Daikei S601 steering wheel boss hub $120
airbag delete version but no resistor included (can get resistor from garage star for $12), no horn ring.
https://i.imgur.com/9XUewvY.jpg
*MX5NUTZ angled gauge pods for dash crash pad x3 $150
-NLA, new, never mounted
ENGINE:
https://i.imgur.com/AHfHCF8.jpg
*M-tuned coolant reroute adapter - New - $150
other parts can be found: https://www.miataturbo.net/engine-pe...e-parts-75584/
SUSPENSION:
https://i.imgur.com/C0QQnzI.jpg
*Full set of OEM control arms, painted, with new/unused Energy Suspension bushings installed. $400
-Front uppers need ball joint replacements.
https://i.imgur.com/AXF8K39.jpg
*1.8 rear with GURU billet torsen type differential - $900
-as used in the FM targa miata, rated to 600hp. 1.8 axles were cut off during removal, 2001 one piece axles included
*93LE uncracked dash, plastics, main carpet $old
-Full interior, glove box cracked on the inside, carpet shows some wear, dried substance in passenger footwell that will likely come out, otherwise in very good condition.=
93LE door panels and arm rests $old
driver side missing tweeter mesh, small amount of black glue stain on passenger but hidden when door closed
MISC:
https://i.imgur.com/3f5fCqz.jpg
*Odyssey PC680MJ $80
*Gates T179RB Blue Racing Timing Belt, BNIB $60
*Mazda B3C7-10-602A, Front Engine Crankshaft Seal 91-05 $5
*Mazda M507-17-335A Manual Trans Extension Housing Seal $15
*Gates radiator hoses $10
*Fel-Pro VS 50094 R Valve Cover Gasket Set for 1.6L $15
https://i.imgur.com/SQMiuJW.jpg
*90-93 Gauge hood professionally covered in leather, red stitching $old
-very high quality! better than redline and other leather covers I've had in the past.
https://i.imgur.com/eOsDO8I.jpg
*Revlimiter NA Retro Electric Window Switch Black $120
https://i.imgur.com/P4BWziX.jpg
https://i.imgur.com/5Cg1dk8.jpg
*95M seats recovered in 93LE red leather $old
Used for less than 1000 miles. very high quality work!
https://i.imgur.com/NWykCS6.jpg
*KG Works Stainless steel Rear view mirror $old
https://i.imgur.com/TeyWqWo.jpg
https://i.imgur.com/ccPIbez.jpg
*JDM Mazda Mirror with built in MAP lights $old
Very rare, has built in plug to tap into footwell lights, no wiring needed! Blue film over lights can be easily removed if desired.
see: http://revlimiter.net/blog/2013/03/let-there-be-light/
https://i.imgur.com/wvxuqrd.jpg
Zoom Fuel lid $OLD
Project G Deluxe Bikini top, assembled professionally by Project G with carrying case and upgraded hardware $OLD
27.25" original measurement with "revlimiter" mod, which extending the length a few inches to cover the rollbar so it should work with longer measurements.
https://i.imgur.com/nqCNjCE.jpg
*Runabout S800 chrome mirrors $old
Gaskets and mounting hardware included.
