FS 99 10AE Track Ready Car (TTE/TTD)
I’ve had this car since July 2011. I am the second owner. I’m selling because I just bought a 125CC Shifter Kart and I can’t afford to do TT/HPDE with the Miata, ChumpCar, and Karting – so its gotta go. I’ve done ~15 track days with this car, and its taught me a ton about competitive driving. I’m really going to miss it.
In April 2012 the #4 crankshaft thrust bearing #4 failed during a track day at Sebring (see: http://www.miata.net/solo/99miatathr...ngfailure.html). I purchased a complete ’99 longblock with 149,000 on the clock from Tom Neel at Parts Group and had Mike at ISC Racing in Winter Haven install it and replace all the seals and other items (listed below).
There is a lot to list here, and I may have missed some stuff, but this should cover most of it. I’m asking $8500 OBO - $8000 OBO without the top, and would like to sell everything at once, but would consider selling the hardtop separately only if the potential purchasor isn't interested!!. I would also consider trades plus cash for a early 2000s or late 90s Chevy 1500/2500 or Ford F150.
This would make an excellent TTE/TTD car, HPDE car, or SM/PTE/PTD donor. Totally track ready, but it and get out on track!
Title in hand. Very motivated seller, I need this thing gone!
Details:
10AE #3891. Has a hardtop that was recently painted the same color as the body. Hardtop is in excellent condition.
79,000 miles on chassis. Body is in pretty good shape, has some clearcoat fade and some small scratches and dings. Better than par for the course for a track car.
155,000 miles on motor. I can’t prove this, but it looks like it has a rebuilt head. In any case, its been well maintained and is very clean. Runs great. I’ve got 4 track days on the new motor.
I have all receipts and other documentation from the install by ISC Racing. At the time of the swap they did front main, rear main, trans, and cam seals as well as a timing belt, waterpump, clutch, throwout bearing.
Still has AC, blows cold!
T6 used after every track day, doesn’t burn or leak any oil.
Brakes bled with RBF600 after every track day.
Motorcraft Trans fluid with trans seal. Motorcraft also used in diff. Both fluids have less than 6000 miles since last change.
Clutch master and slave replace at 75,000 miles.
Rear O2 replaced 3000 miles ago.
Shifter rebuild about 2000 miles ago.
Modification Details:
15x8 6UL black. Perfect condition, no stratches or dings.
225/45-15 Hankook RS3s. These have at least 3 track weeks left on them, maybe more depending on the track and how you drive of course. My estimate comes from how I drive at Sebring.
10AE Bilstiens with Ground Control coilover sleeves and 550/350
Eibach springs. FCM Bumpstops. Very similar to the Mazdaspeed SM suspension package, just fit my budget better at the time. Ride height is 12” front, 12.25” rear.
FM FSB/RSB. 949 Racing adjustable endlinks.
Carbotech XP8 pads and blank rotors. XP8s have only one track day on them! Again, bled with RBF600.
Raceland header. GWR Roadstersport3 midpipe and muffler. Good midrange pickup.
Mishimoto 55mm radiator installed less than 1000 miles ago.
80/20 distilled water to coolant ratio. OEM thermostat.
HardDog Hardcore M2 Hardtop with padding and cover. Professionally installed. Has a few minor scratches.
Kirkey 41500 series seats with covers.
GForce Pro 3” 5 point latch and link harnesses.
Voodoo black gloss shifter knob.
All sound deading material removed. Carpet in place, and in decent condition. Some fading on driver’s side footwell.
Trunk completely gutted.
Fog lights removed, but I still have them, so you can pop them back in if you want. I was prepping for a TSE brake duct kit.
I think those all the major mods. There may be some other stuff that I will add to this after going through some more receipts. I have documentation for everything.
The bad:
The front O2 needs to be replaced. I have a sensor, I just have had time to replace it yet. Will most likely do before sale, or will give sensor to purchaser.
Have had some issues with the P0420 code, but I haven’t been able to troubleshoot completely. Has to do with the high flow cat in the midpipe I believe. Does not effect milage or how the car runs, so it was very low on the priority list.
Car does idle a bit rough when cold, but I believe this is due to the front O2, the intake and throttle body are probably due for a cleaning as well.
Spares:
I have some spares – this may not be a full list.
10AE seats, in very good condition
Stock springs
Blank rotors
OEM Tanneu cover, excellent condition
Spare tire
All of the sound deadening material I took out and all the trunk bits and pieces including the OEM jack.
Fog lights with brackets
OEM sway bars
OEM NB Radiator.
PM me, email me at pmhaddad at mtu dot edu or call me at 906 370 eight five four six (after 5 please). Email/PM I can easily answer throughout the day. If I don’t answer a call its because
I’m at work, leave a message!
This thread of course is useless without pics. Here are a few. I’ll update with pics of how the car sits in the next day or two. NOTE: The hardtop color does match the car (there are a couple pics that illustrate that).
http://sphotos-a.xx.fbcdn.net/hphoto...05418038_n.jpg
http://sphotos-a.xx.fbcdn.net/hphoto...02209358_n.jpg
http://sphotos-a.xx.fbcdn.net/hphoto...80315340_o.jpg
TLD;DR: Track ready NB $8500 OBO, $8000OBO without hardtop.. Purchasor gets first dibs on top.
Thanks for looking! If interested, I can email as many pics as you want, I have many.
