Any idea what time the St Pete caravan is leaving? I want to join in.
Type: Posts; User: joe morreale
Any idea what time the St Pete caravan is leaving? I want to join in.
I have Force Flow 640cc injectors on my 2001 car, with Megasquirt. Cheap CAI and exhaust, otherwise stock. More power throughout the rpm range, easy starting and smooth idle. I'm using 1.12ms...
I used the Leatherique restoration kit to fix cracks and redye my seats. First attempt the dye came off in sheets. I didn't clean them properly. When done the seats looked great. Six months later...
These are pics of my hacked shorty console. I made it from a black 99 piece. I then covered it in vinyl, using leftover African Mahogany, from my door panels.
I laminated the shifter and radio...
A question along the same lines. (don't mean to hijack) Can the power line from the cigarette lighter be used to power the wideband? A hard ground into metal going to work?
I had issues very similar to yours. No codes. What turned out to be was a failing MAF. See if you could borrow one from a friends car to test. I bought my replacement used for $40. That was 3 years...
I know this is an old thread but I work at a shop that does tops. We recently had a customer bring in a Sierra top to install on their mustang. There wasn't any instructions so my boss called the 800...
Just saw this. I work in a top shop. This is a Mazda known and common problem on NCs. I haven't heard or seen any solution for it. Mazda has replaced tops under warrantee when it happened early.
When I got that code I started to use Rotella T-6 oil. The code left and has never come back. That was 8 years ago.
I used paint stripper from Home Depot to remove the clear from my polished wheels. It should work for yours. You would have to paint them or get powderccoated. Expect anywhere up to 50-80 to...
This is my 1st stage to a vintage look for my 2001 SE. I made new door panels. They're flat like NA. I used 1990 NA door card tops, which I stripped and reupholstered with some foam in it. The cards...
1. PhatMiata 1993 (SuperCharged) (Plant City, FL)
2. maharaj 1990 (MonsterMiata 5.0L V8) (Lutz, FL)
3. Greg/Joker 1995 Triple Black (Lutz, FL)
4. YellowYata 2002 Vivid Yellow (Port Charlotte, FL)...
Count me in
1. Myself - '79 RX-7
2. Josh (JC_MX5) - '94 323
3. Tylor (mx-p5) - '96 MX-5
4. Andrew (Tungsten6) - '02 MX-5
5. Brandon (fatti03MSP) - '03 MSP
6. Henry - MZ3/FR-S
7. Coleman +1 -...
Yes I sent them a 1''x1'' square from my "donor" seat. There's not much extra leather on a seat to get a piece. I believe you can send anything for color matching.
After hating my worn out , cracked leather on my seats I decided to do something about it. I ordered a kit from Leatherique to restore them. I got crack filler , cleaner, dye and preservative....
I thought that might be the problem. I had similar issues that's why I mentioned it.
Courtesy of my wife's driving skills.
http://i1229.photobucket.com/albums/ee476/joemorreale/miata/dent-1.jpg
Other than repainting and blending the panels the only thing I could think of is something like dr. chip which fills the scratch. If you have comprehensive your going to have to cough up the...
Pull the rest of the plastic off, then you have to remove the glass, then the regulator and motor is accessible, although tight for removal. If I remember right the cables wrap in different...
Took me about 100 bleeds to fully purge my clutch system of air. It sounds like you still have air in the lines. I would try and bleed the hell out of it again.
When my crank sensor started to go I was getting intermittent stalls. Sometimes it was just a mater of popping the clutch to start it while in traffic. I never just let it coast to see if it would...
+1 on the Robbins.They're cut perfect. They have all the holes in the right places, making it almost impossible to put it on wrong. Their 3 year warranty is legit, as they gave me a brand new top...
If the car seems to run ok then I would just drive the hell out of it. If your leaky valve gets worse it'll probably start missing or running rough. If that time comes then it's time to take the head...
Name: Rotella T6
Brand: Shell
Viscosity: 5w-40
Type: Full Synthetic
Grade: A
I used this oil to rid myself of a persistent po0012 code. VVT actuator stuck open. Ive been using it for 2 years...
Awesome work Junkman.