Page 2 of 2 FirstFirst 12
Results 16 to 28 of 28

Thread: Driven Daily NA (take 2)

LIKE THIS THREAD!

  1. #16
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    Today, I rebuilt the torsen limited slip.


    For now, it lives next to the clutched limited slip, waiting for me to choose which will be installed for Mt Washington next weekend.


    We also installed the new VMAXX suspension. This is a pretty fantastic budget setup (right at the $1k mark), and is still pretty compliant. Track setups would be far too stiff for any of the hills we run, so I wanted to find something that was high quality while still being compliant and adjustable. After a rough base tune, we have the car level again. Hopefully we'll have some time to fine-tune before Mt Washingont.



    Finally, and most importantly, we beat the piss out of the transmission tunnel. Then we cut a huge chunk out of it. Then we could fit the widest seat I've ever seen in my life ... into one of the smallest cabins available in a production car. It took most of yesterday and today to get it all aligned, get the seat facing forward, get the seat level, and make sure I could sit in the car without my head hitting the cage while also being able to close the door. Seat installation sucks.


  2. The Following 2 Users Say Thank You to drummingpariah For This Useful Post:

    freedomgli (07-11-2017),MiataQuest (07-03-2017)

  3. #17
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    Well, we ended up missing Mt Washington. As the deadline for the rookie orientation run drew near, we had a hard time getting the car street-legal to bring up to the hill. There were too many little things standing in our way, and not enough time/hands to finish prep, and I had to drop off the roster. We'll have another shot at 2020, and the hope is that we'll have the Datsun available for that.

    For now, prep continues for Mt Burke at the end of this month.

  4. #18
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    The latest video, covering why we missed Mt Washington and where we're going from here.

  5. #19
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    It's been pretty busy, but the Miata is nearly finished. We just took the e350 out for its debut as a support vehicle, and it was nothing short of brilliant. Having all the tools and camp requirements in one place is extremely helpful, along with having plenty of light to work with at night time.

    The only major issue I had was a broken positive battery terminal strap. The whole thing essentially fell apart all in chunks, and after the familiarization run on time trials day, the car wouldn't start.



    We had some motorbikes racing this event, so I headed over to them where I got to meet an impressive little lady named Kathy (who is also a stunt plane pilot, as it turns out) set me up with some safety wire to temporarily fix it. It worked like a charm.



    I'm putting together a full event recap, but in the meantime here's one of my runs from Sunday.


  6. The Following 4 Users Say Thank You to drummingpariah For This Useful Post:

    freedomgli (10-12-2017),HarryB (08-31-2017),JamieH (08-31-2017),MiataQuest (08-30-2017)

  7. #20
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts


    Which is better for you guys? The race footage or the story behind the race?

  8. The Following 3 Users Say Thank You to drummingpariah For This Useful Post:

    freedomgli (10-12-2017),MiataQuest (09-08-2017),Phatmiata (10-13-2017)

  9. #21
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    This was a bit more of a rough event, and was the first time I couldn't drive the car home afterward. I think it also bumped me out of the running for Class Champion this season. I should be able to repair it by Mt Philo next month, but I had really hoped to circle back on the Datsun after this one.


    Here's race footage from one of my practice runs on Saturday. I'm not committing to corners like I would on race day, but it was still pretty quick. Good enough to be 6 seconds faster than my personal best, when I was pushing as hard as I dared.


  10. The Following 2 Users Say Thank You to drummingpariah For This Useful Post:

    freedomgli (10-12-2017),Roadster7 (09-19-2017)

  11. #22
    Something clever Martin's Avatar
    Drives
    slowly and carefully
    Location
    Bentonville, Arkansas
    Join Date
    Dec 2011
    Posts
    6,107
    Thanks Given
    1,439
    Thanked 1,882 Times in 1,030 Posts
    Quote Originally Posted by drummingpariah View Post


    Which is better for you guys? The race footage or the story behind the race?

    I finally had time to watch this video. I'm a sucker for entertaining documentaries. I like the story a lot, good job!

    I plan to watch the race footage later this afternoon.

  12. #23
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    I'm working on the same thing for Ascutney 2 as well. The goal is to cover all the events this season, then finish up the Datsun build documentary.

  13. The Following User Says Thank You to drummingpariah For This Useful Post:

    Martin (09-20-2017)

  14. #24
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    New coils, wires, and plugs sorted out the stumbling issue. A new set of 225-45-R15 v720 tires solve the untrustworthy Maxxis tires.

    ... I think I'm ready for Philo this weekend, and I won't even be welding 'till 2am the morning of the event. I could get used to this.
    ​​​​​​​

  15. The Following 2 Users Say Thank You to drummingpariah For This Useful Post:

    freedomgli (10-12-2017),Martin (10-12-2017)

  16. #25
    Admin / Pit Boss / Miataholic Phatmiata's Avatar
    Drives
    Kirin the '93LE Roadster
    Location
    Tokyo / Florida o_O
    Join Date
    Apr 1994
    Posts
    29,311
    Thanks Given
    11,720
    Thanked 7,459 Times in 3,688 Posts
    Loving the videos, but would really like a Datsun build on here too, we have a lot of old school guys that would enjoy it for sure.

  17. The Following User Says Thank You to Phatmiata For This Useful Post:

    HarryB (10-13-2017)

  18. #26
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts


    My only problem in this event is the cxracing exhaust manifold. I can't recommend avoiding them enough, after this latest experience. The header survived one event and literally started falling apart at the seams. Their welds are horrible, and their customer support offered to refund me $40 (on a $400 part) to repair the welds. Repair isn't even possible without cutting it back down to individual sections of tube, since all of their welds are improperly penetrated and started cracking immediately. I'm running a 14" flex pipe directly on the back of the header, and it's still falling apart incredibly quickly.

    I certainly understand that manufacturing defects happen, but they aren't even trying to stand by their product. Now I'm going to have to build another new exhaust, since this didn't come close to aligning with the factory exhaust. I really really regret working with them, but I managed to make it through the season despite it.


    This video marks the end of the 2017 hillclimb season, so I'm about to dig back into the Datsun build for 2018!

  19. #27
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    With the 2017 race season over, we're finally catching up on the Datsun build video edits.


  20. #28
    2,000 rpm - light wheelspin, no bog here! drummingpariah's Avatar
    Drives
    '75 Datsun 280z (turbo), '97 MX-5
    Location
    Manchester, NH
    Join Date
    Apr 2012
    Posts
    152
    Thanks Given
    3
    Thanked 109 Times in 61 Posts
    I replaced the main under-hood battery, and decided to use the old battery as a second auxiliary battery. I welded together a double-battery holder for group 65 size batteries that can live under the box for race events. This is it around halfway done (I'll have to post another of it finished later).



    It should be quite an upgrade as compared to the OEM aux battery holder.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •