Results 1 to 15 of 58

Thread: Pitcrew part out: JDM and other high quality parts!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    2,000 rpm - light wheelspin, no bog here! xcoldricex's Avatar
    Drives
    pitcrew miata
    Location
    Austin, TX
    Join Date
    Jan 2012
    Posts
    167
    Thanks Given
    8
    Thanked 46 Times in 34 Posts

    Pitcrew part out: JDM and other high quality parts!

    email xcoldricex@gmail.com for fastest responses.
    Shipping costs additional from Austin, TX. Pickups welcome.
    Paypal GIFT, Square Cash, or Venmo.

    Additional images: https://imgur.com/a/TQY



    Trackspeed Dual Core Race Radiator with FM lower silicone hose used 1k miles on street car $450


    Motolita leather steering wheel and polished hub, Lecarra billet horn button, revlimiter custom Mazda horn graphic. $380

    OEM Mudguards $80

    Garagestar Handbrake $55

    Aluminum HVAC knobs $90

    https://i.imgur.com/np7O7Tt.jpg[
    Modified Bob Boig road race header with Artech Custom 3" Vband exhaust with Magnaflow muffler, modified with flex pipe $old

    Beatrush Aluminum radiator Panel $95

    INTERIOR:


    Nakamae Diamond Quilted trim set, Black with white stitching - $450
    Includes the following pieces:
    -Lower package tray
    -Sidesteps
    -Transmission tunnel


    Checkered Cocomats, super high quality - used less than 1k miles $180


    * JDM McIntosh double din radio Subaru CD and tape deck in a DDMworks custom double din adapter - never mounted $480

    RARE RCA out, FM adapter (RCA out only avail on JDM version). DDMworks adapter was $150 alone



    Autokonexion ver 1.5 ducktail trunk $400
    This is the version 1.5 that has been discontinued by Autokonexion. the 3rd brake light completely shaved off for a cleaner look.



    Hard dog Double Diagonal HC Stainless polished Roll bar $950
    The Hard Dog bar is no longer produced, they told me they would reproduce one for $2500. I will need to uninstall the bar, so I will need some lead time after purchase.




    *Daikei S601 steering wheel boss hub $120
    airbag delete version but no resistor included (can get resistor from garage star for $12), no horn ring.



    *MX5NUTZ angled gauge pods for dash crash pad x3 $150
    -NLA, new, never mounted


    ENGINE:

    *M-tuned coolant reroute adapter - New - $150
    other parts can be found: https://www.miataturbo.net/engine-pe...e-parts-75584/

    SUSPENSION:

    *Full set of OEM control arms, painted, with new/unused Energy Suspension bushings installed. $400
    -Front uppers need ball joint replacements.


    *1.8 rear with GURU billet torsen type differential - $900
    -as used in the FM targa miata, rated to 600hp. 1.8 axles were cut off during removal, 2001 one piece axles included

    *93LE uncracked dash, plastics, main carpet $old
    -Full interior, glove box cracked on the inside, carpet shows some wear, dried substance in passenger footwell that will likely come out, otherwise in very good condition.=

    93LE door panels and arm rests $old

    driver side missing tweeter mesh, small amount of black glue stain on passenger but hidden when door closed

    MISC:


    *Odyssey PC680MJ $80

    *Gates T179RB Blue Racing Timing Belt, BNIB $60
    *Mazda B3C7-10-602A, Front Engine Crankshaft Seal 91-05 $5
    *Mazda M507-17-335A Manual Trans Extension Housing Seal $15
    *Gates radiator hoses $10
    *Fel-Pro VS 50094 R Valve Cover Gasket Set for 1.6L $15


    https://i.imgur.com/SQMiuJW.jpg
    *90-93 Gauge hood professionally covered in leather, red stitching $old
    -very high quality! better than redline and other leather covers I've had in the past.


    https://i.imgur.com/eOsDO8I.jpg
    *Revlimiter NA Retro Electric Window Switch Black $120

    https://i.imgur.com/P4BWziX.jpg
    https://i.imgur.com/5Cg1dk8.jpg
    *95M seats recovered in 93LE red leather $old
    Used for less than 1000 miles. very high quality work!

    https://i.imgur.com/NWykCS6.jpg
    *KG Works Stainless steel Rear view mirror $old

    https://i.imgur.com/TeyWqWo.jpg
    https://i.imgur.com/ccPIbez.jpg
    *JDM Mazda Mirror with built in MAP lights $old
    Very rare, has built in plug to tap into footwell lights, no wiring needed! Blue film over lights can be easily removed if desired.
    see: http://revlimiter.net/blog/2013/03/let-there-be-light/


    https://i.imgur.com/wvxuqrd.jpg
    Zoom Fuel lid $OLD


    Project G Deluxe Bikini top, assembled professionally by Project G with carrying case and upgraded hardware $OLD
    27.25" original measurement with "revlimiter" mod, which extending the length a few inches to cover the rollbar so it should work with longer measurements.


    https://i.imgur.com/nqCNjCE.jpg
    *Runabout S800 chrome mirrors $old
    Gaskets and mounting hardware included.
    Last edited by xcoldricex; 11-26-2018 at 02:31 PM.

  2. The Following User Says Thank You to xcoldricex For This Useful Post:

    Agent☣Orange (05-13-2018)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •