Price: $750
Shipping + Paypal: $50
What's Included:
Techno Tuning Toy ITB adapter (discontinued)
AE101 Throttle Bodies
45mm Air Horns (new, never installed or mounted)
Vacuum Block
Toyota TPS
Volvo Vacuum Pump (not pictured)
The Good:
As you may know, some of the T3 adapters for the NB miata simply don't line up. I personally looked at multiple adapters, stamped as appropriate for the NB, and found what others have reported: a rather significant overlap on the intake port. I eventually found one in the appropriate size. There is approximately 1 - 1.5mm of overlap on the intake port. I tried my best to get a photo (see below).
The Bad:
Previous owner painted everything and did a poor job. As you can see there is lots of paint flaking. Function was more important than form when I purchased these and the plan was to hit them with a dremel and then repaint. So, they're a little ugly, but nothing that couldn't be fixed. Given the difficulty I had in finding a "good" T3 adapter I was less concerned about paint and more concerned about not having to remove a ton of material off the intake port (or having to "build up" the adapter as some have suggested.)
Third party data / zero affiliation?
Sure, why not.
https://www.miataturbo.net/dynos-tim...01-itbs-95976/
**Trying to determine why site won't let me add photos...