-
Idling - Listen to it purr...
Plug Wires:
Solid black
Black w/blue
Black w/yellow
Red w/black
Harness:
Solid red
Black w/red
Black w/yellow
Red w/yellow
FWIW: I've already tried solids together, Black red/Red black, Black yellow/Red yellow, Black blue/Red yellow......because it seemed logical at the time.
-
-
Idling - Listen to it purr...
If this helps anyone in the future, the torn wires threw a P1040 and P1141.
-
-
I would love to help, but I don't know what year the car is.
Just from knowing the year, I could go here.
Then I could find the O2 wiring diagram to see which wire goes where and probably figure out which wire does what.
On a four wire O2, one wire is a signal wire for the O2 (5v, I think), one wire is a switched 12v heater wire. The other two are grounds.
There should also be a wiring diagram that comes with a universal O2 like you bought to help with the wiring.
I hope this isn't reading satirical, I really am trying to help, but you aren't helping yourself without giving the info people need to help YOU.
-
-
Idling - Listen to it purr...
It's a 2000 :-) I forgot to add the year :-( Never even realized that different years probably had different colored wires.
-
-
Cool!
Most universal O2 sensors come with a weatherpack-type connector to splice in the harness. There should also be a wiring diagram with it that describes which wire on the O2 does (signal, ground, power). Do you have that? From that I can tell you which wire corresponds with your car's wiring harness.
On the wiring diagram for your car on the site linked above the wires on the car's harness reads:
RED wire -> 3J on ECU
BLK/RED -> +
RED/YLW ->3V on ECU
BLK/WHT -> GND
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules