-
Idling - Listen to it purr...
95neoner's 99
Links to my other threads:
intro:http://mazdaroadster.net/showthread....neoner-s-intro
I did a little intro to this car on my intro, nothing major setting it apart yet. I guess the 2 big parts I can brag on are the limited run Garage 502 mirrors and the carbon fiber Tougerun ducktail, until they decide to make those available again. I guess before I get to talking about it too much, I owe you a couple pictures. In case you hadn't seen it before, allow me to show you around really quickly so you can see where I'm at now. I'm due for a few new "overall idea pictures," but this should get you a basic idea.
Clutch and brake fluid have been changed since.
couple small changes since then, one I have a pic of, windshield's been changed, and the center console is also removed. Started me on my interior project. You'll see that unfold here as I get to it.
Since then I've painted the fuel hose cover black while I was in behind there trying to take care of some of the surface rust back there.
A lot of little things bothering me on this car, but it is my daily so it's not perfect. I'm in the middle of a lot of detailing on it right now. I think I've spent at least 12 hours on 3 of my summer wheels getting them cleaned back up and presentable. One of them was just replaced due to the old one having a crack on the inside. I've spent the last 6 years in the Navy on a submarine, so they've been neglected for at least the last 7. During that time they've been dailied on and run though salt, and attempted to go through a couple curbs. Considering the circumstances here, I don't feel they're turning out too bad. I'm starting out by washing, cleaning them with wadding polish, claying, hand buffing, and then using a sealer to protect them, particularly since I run Hawk HP+ pads and there's bare aluminum on them now. Correct answer is to repaint, but I can't justify it on wheels that are just getting me through until future plans start falling into place, i.e. the BP finally dies, but with as much of a maintenance nazi as I try to be, I feel that may be a ways off yet. The engines in these cars are awesome for long term reliability. Here's some before/after:
Couple of quick basics: I've had this car for 6 years in April. It's a daily driver that I take to autocross when I can. Changes are mostly cosmetic right now since I'm waiting on the opportunity to present itself for a swap, which I'll completely change the performance aspect of the car for, so I see no point in wasting money on temporary gains. I just got out of the Navy in December and started my own business, so I'm still operating in the red right now, doing my best to be conservative with what I have, may not see a lot of progress on any of my cars right away. I always like to provide a list of everything I've changed on the car, so if you have any questions what something is, it's here or maybe there's a couple things in those pictures you overlooked.
'99 Mazda Miata mod list
Exterior:
'01 front end conversion
PIAA Si-tech 18” wiper blades
Sylvania Silverstar headlight bulbs
OEM hard top
17”x7” +42 Konig Holes w/ Yokohama Parada Spec 2 205/40ZR17
Garage Vary nostalgic taillights
Garage 502 mirrors
Beatrush front license plate frame
Vis carbon fiber trunk
Toguerun rear ducktail spoiler
NASCAR COT wing with custom mounts (not yet installed)
Rigid Industries SRM Marine diffused spreader light (back up light) (not yet installed)
Brakes:
Hawk HP+ pads
Goodridge stainless steel brake lines
Wilwood 570 fluid
Transmission:
Royal Purple 75w120 & diff additive in diff
stainless steel braided clutch line
Wilwood 570 clutch fluid
Beatrush aluminum shifter collar
shifter rebuild
Exedy OE replacement clutch
Flyin' Miata clutch interlock override
Interior:
Mazdaspeed steering wheel (D-cut or limited edition)
NRG hub adapter
B-titanium steering wheel bolts
Maruha shift knob
Hard Dog HCHT M2 double diagonal roll bar w/ harness and door bars
Garage Star Bolt-in hard top latches
removed sun visors, radio, center console, radio blanked with carbon fiber blank & to be used for switches, gauges
!Njoy visor blanks
I.L. Motorsport satin & leather parking brake handle
“loose” leather parking brake handle cover
Allstar Performance 5 panel rear view mirror
Roadstertech window guide bushings
Motor/engine bay:
ARC intake chamber
HKS SMF reloaded filter (red)
Magnecor KV85 race spark plug wires
NGK ZFR5F-11 spark plugs
Gates racing timing & accessory belts
Royal Purple 10w30 & filter
removed charcoal canister & other plastic bits
Garage Vary carbon fiber radiator cooling panel
Mishimoto radiator
Mishimoto fan shroud / fans
Hondata intake manifold gasket
Moroso coolant reservoir
Moroso air/oil separator
Suzuki Cappuchino washer fluid bottle
Garage Vary carbon fiber cowl cover
Suspension:
Ohlins coil-over dampers (race valved)
Swift coil-over springs (12kg/mm front, 8kg/mm rear)
Carbing front & rear strut tower bars
Eibach sways
Good-win-racing heim jointed end links
Last edited by 95neoner; 03-16-2015 at 09:58 PM.
Reason: adding links
-
The Following User Says Thank You to 95neoner For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules