Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
If you want to read up for yourself there are plenty of examples on m.net about issues with Jon Bond rebuilds. Granted he usually "makes it right", which is great but would be better if it was right the first time around. I hope they get it turned around because I think Jon is very knowledgeable and helpful.
'01 NB2 aka MisF1re: http://mazdaroadster.net/showthread....218#post207218
'97 M aka Warbird, gone but not forgotten: http://mazdaroadster.net/showthread....B&goto=newpost
Instagram: @greasemonkey2000
MaRcOp01o (04-19-2019)
So out of boredom trying too save money and waiting for the right deals I have compiled a list of every mod thus far on the B-Spec. I am 99% sure I am missing a couple things but here is what I have so far and I made it nice and neat for you all:
EXTERIOR:
Bomex Aero Mirrors
Garage Vary Side Skirts
Mazda OEM
• Mud Flaps
• Hardtop/W Defroster and Headliner (Strato Blue)
Runabout Type 1 Fuel lid
Unknown Brand Shorty Antenna
US Racing Sports Front Lip
INTERIOR:
Apexi Boost Gauge
Blitz Coolant Temp Gauge
Mazda OEM
• Brushed Silver Vent Rings
• Eunos Checkered Floor Mats
• Nardi Hub
• Roadster Side Sills
• S-Special Optional door tweeter speakers
• S-Special Radio Panel Door Trims
• Sunglass Holder
Mazda Speed
• Gauge Cluster
• Horn Button
• Seats (Red)
• Shift Knob/ Leather Perforated
• Steering wheel
• Trap Timer
• 7 Point Roll Bar
Nielex Hazard/Pop up switch
Pioneer Radio
Razo Gas Pedal Extender
TEIN EDFC Controller
Engine Bay + Engine Mods:
Apexi Intake Filter
ARC Diversion Panel
Blitz Coolant Temp Sensor
Cusco Intake Pipe
Mazdaspeed
• Cams 256 Duration
• Coolant Bag
• Fuel Pressure Regulator
• M-45 Supercharger
• Oil Cap
• Oil Cooler
• Port Polish
• Radiator Cap
• Shaved Head 30 Thousandths
• Spark Plug Wires
• Uprated Valve springs
• Uprated Valves
Exhaust
MazdaSpeed Header
HKS Silent HiPower Catback
SARD Cat
SUSPENSION
Energy Suspenion Bushings
MazdaSpeed
• Differential Mounts
• Motor Mounts
TEIN EDFC Coilovers
Wheel Tire/Brake Setup
APP Stainless Brake Lines
Autoexe Front and Rear Brake Pads
AP Racing Brake Fluid
DBA Drilled/Slotted Zinc Coated Front Rotors
Mazda OEM
• Rear Rotors
• 1.8 Calipers
ENKEI RPF1 15x7 +35
Dunlop Direzza 2 195, 50, 15
DRIVETRAIN
Mazdaspeed
• A-Spec Short Shifter
• Close Ratio Gearing Kit
• Prototype 4.88 Differential Gearing
OS Giken Carbon 2 Disk Clutch
Toda Light Weight Flywheel
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
jakemx5 (05-01-2019),MiataQuest (05-01-2019),MikeA (05-05-2019),oldgrayleather (05-01-2019)
MaRcOp01o (05-01-2019),MiataQuest (05-01-2019)
Yeah Pete same here I love reading through them, especially if it’s a car I’m taking inspiration from than I make it part of my build list haha.
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
MiataQuest (05-01-2019),oldgrayleather (05-01-2019)
MaRcOp01o (05-01-2019)
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
MaRcOp01o (05-01-2019)
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
I gave the B-Spec a much deserved wash and wax and went for a nice spirited drive in the jungle gym.
275A4FAB-D80F-427E-A50C-D1366C930EA4.jpg
AE79685D-8680-43FA-81DA-86168007A7ED.jpg
0519412A-9285-4751-9229-73F9E5C6DA41.jpg
994C79FB-E0F7-4B91-9F62-A1385D86D467.jpg
B090A83C-F55A-418E-8366-A2B5DD0B4D69.jpg
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
Greasemonkey2000 (05-20-2019),HarryB (05-21-2019),MiataQuest (05-20-2019)
So on Saturday I received an awesome delivery that I have been waiting for, for quite some time. Thanks to Chris Horne for holding it for me I was finally able to receive the new face of the B-Spec. A Mazdaspeed Type-1 Front Bumper.
20B44656-03E5-4A81-8DA1-F82035D2862D.jpg
It is in good condition compared to what I have seen and for the price I can not complain. Also came with the big rubber 2-piece lip.
C5337EF2-6CAA-4D65-9925-F945C74D3050.jpg
Once I received my dad and I got right to work and removed all the old bondo and it revealed a huge crack but wasn't too bad.
C9164AD3-77B0-42D6-BFBF-8A6D6868B8AC.jpg
Thankfully this was the extent of the damage really wasn't that bad.
2A61C10B-4728-4F5A-98BB-4B084519821D.jpg
It did have some little spider cracks so just for safe measure i filled every crack I could find with a little piece of fiber glass(Featuring my feet).
0E1E4035-A61E-483A-A6C6-F40E27BD5F77.jpg
And to hold the damaged area and to line up the lip we used a paint stirring stick and some clips and when it hardened was perfect fitment. I am really happy I was able to work on the bumper because I want it on the car ASAP. I already have a painter who is waiting on me to drop it off. Just have to do some bondo work and sand it then we are good to go!
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
Greasemonkey2000 (07-11-2019),HarryB (06-17-2019),MikeA (06-19-2019),oldgrayleather (06-17-2019)
It is going to look so perfect and with the MS01Rs it will look even better!
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
oldgrayleather (06-17-2019)
So the bumper has been patched up and primed and it is ready for paint!! I fixed all the spider cracks and fiber glassed all the bumpers potential weak points. I want to do a quick test fit then get this thing painted!!
FD5D4E38-3ED3-4E9B-A7B3-200C9817A9E3.jpg
EEA1BEAB-1F91-487D-B9F0-E0FC96480A56.jpg
E621FF9E-9CFA-449A-A590-3DB628D85242.jpg
D9D5C464-3858-46B5-A672-51933A246FF1.jpg
8E7C88D2-C868-4C52-8B59-0014349BD845.jpg
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
fwdtamiya (07-10-2019),Greasemonkey2000 (07-11-2019),MiataQuest (07-22-2019),MikeA (07-11-2019),oldgrayleather (07-22-2019),Phatmiata (07-22-2019),vote4pedro (07-14-2019)
So ever since I have received this car it has had the biggest wiring mess ever. And I have eliminated so many wires I could power a house. So over the weekend I put some work into the engine bay and cleaned up everything I could because I will be buying the Track Dog Racing idler pulleys and removing the supercharger to have it rebuilt. So I would like everything nice and tidy. Also thanks to my brother for helping out.
E80F2C81-506E-4981-A35B-6F7BB66A16E1.jpg
So this car has had old Italian air horns that run off an air pump but it never worked in the car. so I removed them, hooked it up to a car battery and sounded like I was at a Mid 80's Rally Race in Europe. They are that high pitch Euro air horn sound. As cool as they are they are very heavy and just wires I do not need.
6F53F842-7962-40AC-8EAC-A5087D5C0325.jpg
Follow the Builds
1993 Eunos Roadster B-spec by Mazdaspeed
http://mazdaroadster.net/showthread....819#post222819
1993 Mazda Miata LE
https://mazdaroadster.net/showthread...233#post244233
HarryB (07-22-2019),MiataQuest (07-22-2019),MikeA (07-23-2019),oldgrayleather (07-22-2019),Phatmiata (07-22-2019)