What tips do you guys have for killing interior rattles? After I installed my exhaust the deeper tones are making everything shake. My biggest issues if the rear package tray and a few dash rattles
What tapes and stuff do you all use to stop rattles and how do you pin point them?
Hardtop fixed my annoying windshield side pillar rattles, garage star hard mounts killed my hardtop rattle, those were mainly the only ones I had that bothered me.
I have terrible glovebox rattle. Really need to figure out how to fix it.
GOD DAMN my gauge hood rattles and I just want to fucking kill it.
For my gauge hood I used a cut up bicycle tube strategically placed in several sections under it and reinstalled..... done.
Stripped/slammed dd
I just wrap it all in suede or unbolt it.
But really, I've stuffed pieces of felt or business cards between the dash and windshield to kill many rattles in these cars with solid motor mounts.
I use aircon piping self-adhesive insulation tapes and closed cell foam pads, PU and even PE foams shoved at problem areas just to absorb vibration and even change the resonance frequency. Seems to work thus farThis is on top of the usual chassis bracings that actually helped to remove some squeaks, creaks from the body.
I'm curious to see those hardtop brackets... my hardtop rattles sometimes when idling and always squeaks and squawks when it's cold.Originally Posted by ChrisJuliano
RoadsterLife<3
I'll have to attack them when it's warmer, no motivation in the cold.
Rattles tend to go away in warm weather. So...
I'm always trying to fix rattles. When one comes out, I go crazy trying to silence it. Electrical tape to fill up interior panel gaps helps a lot.
Everytime I fix one rattle, another one starts somewhere else.
..
2004 MSM - FM V-Maxx Coil-Overs, Boss Frog Clearview
TR Motorsports C1M 15x7 +30 with Yokohama S. Drives
AuxMod, Joyfast Super Short Knob, FM Intake Kit @10psi
dang! i need try some of these techniques!
Classic RED 90'
cowabunga dudes!
Put a few strips of Damplifier on the underside of the 1.6 dash before installing in the 94. Used a couple of those felt pads on the bits of the glove box door that contact the dash.
There's a new rattle that I think is one of the parcel shelf cover plates. Should be gone once I get around to reinstalling the shelf carpet and that butyl pad that goes under it.
'90 "LE" with red bits - 7/6 Flex, FM Front Bar, 14x7 +19 RPF1, PWR, SPAL, Maxim Works, Thermal R&D, HDHCSDM2, Zoom, Anvil II, 330mm mahogany Deep Corn, AC/PS delete, LE interior, attitude
'08.5 CWP MS3 GT - AST 4100, TriPoint Rear Sway and Links, JBR STS w/ bushings and lockout plate, Moddiction Anvil II
I once lose a screw between the gas tank and surrounding metal bits under the package tray. That was very close to the worse rattle ever.
Is that the half inch thick fiber pad? When I replaced my soft top a while ago mine was damp and moldy so I threw it out, but now that I replaced the one under the shift boot and noticed the big difference it makes I would like to get another for the package shelf. Can the pads be bought at stores like Lowes?
Posting Permissions
Reply With Quote
