-
2,000 rpm - light wheelspin, no bog here!
How to pull ECU harness pins?
I know diyautotune.com sells a pin puller to pull pins out of your ecu harness, but there has got to be another way to pull the pins. I've done a bit of research and have come up with nothing so far. Any help would be great. Thanks.
Last edited by Agent☣Orange; 07-30-2012 at 06:34 PM.
Reason: Edited title for specificity.
-
-
2,000 rpm - light wheelspin, no bog here!
-
-
care to tell folks how you solved this?
-
-
2,000 rpm - light wheelspin, no bog here!
I'm not going to try to explain it. But if I have time soon then I'll try and make a write up.
-
-
I have used a straight pick tool.
Slide the pick in next to the wire. Sometimes you hear/feel a little click, then grab the wire and the pick and pull them out of the connector. Some are tougher than others to remove. Never yank on the wires.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules