Hawt!
Hawt!
yah yah yah, we get it. sexy pants lights.
either make them start mass producing or get back to building my bikini top!
did this a few weeks ago, but...
IMG_1085_RAW by jeremy!, on Flickr
Clean the interior.. was dirty son :S
2010 NCII TR
...mine is still full of sand.
Removed plastic checking for cause of water behind/under drivers seat. Also pariallt installed cb radio
John Evans
>>>Li'l Stinker<<< https://www.facebook.com/litllestinker
06 MX-5 Miata 6MT-- Quaife LSD >>>Li'l Stinker on MR.net<<<
That wouldve worked except I had the tsb done so there is a blue filter that was put in. I have at this point checked and cleared the drains (there was nothing in there that was blocking it.)
I suspect my rain rail may be beginning to leak a little. I noticed moisture (not flooding) around the shock towers after I washed it one time
John Evans
>>>Li'l Stinker<<< https://www.facebook.com/litllestinker
06 MX-5 Miata 6MT-- Quaife LSD >>>Li'l Stinker on MR.net<<<
I think in that case the culprit may be a reported hole covered by tape. It's located under the chrome plates where the hardtop gets attached. I'm going to be checking the cowl under the windshield wipers reportedly there's a hole there too.
This happened: http://mazdaroadster.net/showthread....ll=1#post77238
John Evans
>>>Li'l Stinker<<< https://www.facebook.com/litllestinker
06 MX-5 Miata 6MT-- Quaife LSD >>>Li'l Stinker on MR.net<<<
nice. id like to do this... but i want weight removed from the other side of the engine bay...
So yesterday was. Have fun with the car day. I checked and the 2 holes were uncovered, the one in the front was the most likely culprit. I taped those up and then moved onto the chrome windshield surround I mentioned in my build thread.
I did the windshield while the paint was drying on my slightly car related project. 4 coats of black, followed by a sticker and 4 coats of clear on an otterbox.