RetroModern
12-28-2014, 11:04 PM
As some of you know, this has been a long time in the making. It took a while to find the perfect lens. It then took a while to design the right bezel to show off the lens, and make it work with the NA & NB chassis. But here it is at last, the second edition of the RM side markers. The side markers are designed to be an alternative to the standard OEM side markers (kind of big, and plastic, imo), and compliment your retro build. The over-all dimension of the markers are: 38mm wide, 13mm tall (from the fender), and mounts through a 1" opening. It was designed this way to make installation as simple as possible. The side markers are held in place by both a piece of double stick tape, and a locking collar on the back for added security. The bulb holder can take both a normal incandescent T10/194 bulb (for period correctness), or LED equivalent. As with most RM products, there are limited numbers to be had. I was only able to secure 20 sets of lenses, thus only 20 sets will be made. 5 sets are already spoken for via pre-order so only 15 are available. Since these are made by hand, allow 2 weeks from the date of purchase for build & ship time.
Price: $169.00 + shipping
http://www.retromoderngroup.com/shop/index.php?route=product/product&product_id=81
You will get:
2 x side marker assemblies.
2 x bulb holder with pig tails.
1 x installation instructions.
https://scontent-b-lax.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10848595_756142871145745_6197206886196611551_o.jpg
Price: $169.00 + shipping
http://www.retromoderngroup.com/shop/index.php?route=product/product&product_id=81
You will get:
2 x side marker assemblies.
2 x bulb holder with pig tails.
1 x installation instructions.
https://scontent-b-lax.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10848595_756142871145745_6197206886196611551_o.jpg