What did you do to your NA today 2012?

[The Driver]

After two weeks of nothing but Taco driving, today I drove the Miata to work. She complained a little (battery lost some charge due to cold local weather, some lash noice) but she started like a general.


What did you do?

[sharkythesharkdogg]

I'm attempting to talk to my MegaSquirt PNP. The classic issue.

[friday]

(yesterday, but) I bled the brakes (they still suck), changed my slave cylinder and installed my new clutch line from 949. I also flipped the tires on my front wheels because the inside of one was real ate up. Might need to get the alignment checked.

[miatasaint]

Today, installed front racing beat tubular sway bar. And put a steel 16mm in the rear. WOAH Porsche handling.

[Muzdaman]

New stereo head unit with a DDMWorks surround and gauges.

[jdmEUNOS]

I went into my garage and look at it and dream about what it will look like once this project is fully done. Everyday I do this. lol!!

[TheFrohn]

took it to the quarter wash to get off the killer salt.

25 degrees out here so it was interesting!

[Caoboy]

I slightly bent a brake hard line.

[emtran]

Not today but Monday morning I replaced my alternator. Had a blast re-tensioning my drivebelt like 15 times... "/

[IanL]

Yesterday, I pulled the cruise control actuator and vac line, and replaced the stock air box with a Racing Beat 180 and filter.

Today, I sprayed all of the suspension bolts with liquid wrench (which I will do again tomorrow) in preparation for swapping the shocks and sways this weekend.

[jux]

This morning, I pulled the '90 out of the garage for the first time in a couple of months. Drove it to work...after the usual battery grumpiness.
Pulled the '94 into the garage for, you guessed it, the first time in two months. Lots of removal/install stuff coming up for that one...

[Tekel]

Refilled my radiator reservoir because the thing leaks like crazy... waiting on my replacement (free under warranty). But this weekend I will be installing hella e-codes, tow hooks, changing oil and giving it a bath.

[Spencer17]

Broke stuff as usual.

[iRoadster]

Took off all the stickers from my rollbar, put some new ones under the hood.

[IanL]

Out with the old...

http://farm8.staticflickr.com/7024/6653537221_28470b5fd6_z.jpg (http://www.flickr.com/photos/fever606/6653537221/)
IMG_2031 (http://www.flickr.com/photos/fever606/6653537221/) by Fever606 (http://www.flickr.com/people/fever606/), on Flickr

[The Driver]

Heading out the door to Denver, so the Miata gets a 9 day R&R... Poor Taco though...

[94R]

Did nothing to the miata since I last drove it on Tuesday. It's running like poo again, so I won't be driving it until after I get it looked at and fixed.

[Alonzo Mosley]

Replaced one of my lower balljoints today, it was a nightmare the taper would not pop out.

I eventually got it by removing my brakes, disconnecting the trackrod end and giving it a good smack, 20 years old and wasnt that bad.

[urban]

Today i prepped my car by playing with the algnment and bleeding clutch and brakes.
im going to shake it down at Adams tonight for the 2012's drift season.

last week i installed the clutch .
a month ago i reinstalled the power steering.

[drv2fst]

Drove it hard, and put it away wet (it's raining).

[Caoboy]

I got bored and had some reflective tape lying around from I don't know why.

http://farm8.staticflickr.com/7141/6662036411_40cb7f7126_b.jpg

[George]

took it's rear lights off to sell them... the rust bucket does not deserve rear lights

[IanL]

In with the new...

http://farm8.staticflickr.com/7032/6586060419_2021b6e0d9_z.jpg (http://www.flickr.com/photos/fever606/6586060419/)
Eibach (http://www.flickr.com/photos/fever606/6586060419/) by Fever606 (http://www.flickr.com/people/fever606/), on Flickr

Plus FM sways, RB adjustable end links and Team Dynamics 15x7s. The result...

http://farm8.staticflickr.com/7005/6661242869_e6b030218a_z.jpg

[MiataLife]

replaced an exhaust gasket :apathy:

[WASABI]

I have a couple projects going on. Today, I was working on the rusty rockers of the red '91. Using my new (Christmas present) angle grinder.

http://www.fagerquist.com/miata/winter2012_1.jpg

I also go a little mig welder, in the red car. Gonna try to weld it up myself.

http://www.fagerquist.com/miata/winter2012_2.jpg

[room42]

I don't know if this counts but I fixed the remote trigger that I installed for my garage door opener (push button switch installed on the side of the console, wired in to the garage door opener located elsewhere in the car)...

[Benbrg]

I drove my miata for the first time in a month. It took me forever to fix it, but man I forgot how good an Enthuza exhaust sounds over 4k :)

[Philly]

Went to the body shop and the wheel refurb place today to get some quotes

Kidney anyone? I need to sell one, maybe two!

[atl20ae]

used J-B Weld to fix and reinforce the clips on my gauge hood

[The Driver]

I drove my miata for the first time in a month. It took me forever to fix it, but man I forgot how good an Enthuza exhaust sounds over 4k :)

Just on Saturday I picked up a chick wile reving my "Enthuzed" NA above 4K, for a date.


She's 22 and just got her license back, after being suspended for "drag racing". We have a date after I get back to Tulsa, from Denver... ;)

[Soledad]

Jeez, Driver. I'm willing to wager that your date is at least ten years younger than you. ;) Anyway, I dropped Soledad off at the body shop for a nice two week stay to get the rust that's beginning to peek through the drivers' side wheel arch cleaned out.

Well, that's it for me! I'm off to PR!

[The Driver]

Jeez, Driver. I'm willing to wager that your date is at least ten years younger than you. ;) Anyway, I dropped Soledad off at the body shop for a nice two week stay to get the rust that's beginning to peek through the drivers' side wheel arch cleaned out.

Well, that's it for me! I'm off to PR!

16, and she complemented my streaks of gray hair... ;)


Good luck in PR and stay safe! Dude I found this AMAZING Toyota museum in Bayamon. PM your e-mail for details!

[majornerd]

Just bought her. New battery, oil change, auto trans fluid change, brakes (pads only). Had her up on the lift - she is in good shape, but suspension is pretty warn.

[Conundrum]

All I did today was put in a full tank of gas lol.
Side skirt install and oil change maybe.

[ChrisJuliano]

Installed some runabout style mirrors, wooden ebrake handle, drove to go get some food with friends and just got home:D woot!

[The Driver]

I just bought a hardtop while on business in Denver! Good thing I brought the Taco all the way from Tulsa!!!

[Tekel]

Well got everything I wanted done.

Installed Hella ecodes, ryoku rob tow hooks, changed oil, and installed amp so I can have music again since some prick decided to steal my radio. Oh, and I threw out my back moving tire ramps.. Getting old sucks.

[jaredef]

lowered and aligned!

[bullit09]

Today I went to the warehouse at work to go pick up a car for one of my customer and I saw my lil silverstone sitting in a corner so I went to sit in it for a while man I miss driving it cant wait for spring

[I<3flippyheadlights]

Sent her to be painted, miss her already

[WASABI]

Today I went to the warehouse at work to go pick up a car for one of my customer and I saw my lil silverstone sitting in a corner so I went to sit in it for a while man I miss driving it cant wait for spring

I do the same from time to time over the winter. I love the smell of the car, when you don't use it every day.

[bullit09]

yes its true that smell ... makes u feel at home lol!

[I<3flippyheadlights]

Thought about it...

[revlimiter]

I fixed an interior rattle.

This extremely annoying, high pitched rattle started a few weeks ago. Between 3000 and 3200, no matter what gear or if I was accelerating or decelerating. And RIGHT in my face. I thought it was coming from the gauge area. It sounded like it. So I took Sharka apart piece by piece and test drove after every small bit. Finally, I had the gauges completely out and the rattle was still happening. I was sitting in my driveway revving while trying to find a rattle in the dash.

Then I disconnected my steering wheel for grins and the rattle stopped. Long story short, it was the horn button rattling against its own housing.

I swapped out the horn button and life is good.

[phillyb]

hahahah!!!
i took pictures of my car while it was sitting at the shop. i also took pics of the head.

[Boris]

I installed a Home Depot $8.00 front lip and almost changed the gearbox and diff oils. Almost.

[revlimiter]

I drove around for no reason this evening after dinner and brought some dessert back home. No rattle? SO AWESOME. And I swear I cured another half dozen barely-audible rattles in my search for the big one.

[iRoadster]

Washed muh car today. Gave it a bit of Converse All Stars afterwards.
Also swapped the steering wheel the other day, but took off the hex bolt trim ring cover today. It looks rad now, I'm gonna leave it like this for a while I think.

[Conundrum]

Drove it around trying to figure out what is rattling towards the back of my car. I think its the covers for the fuel pump and such, but it sounds like its coming from the trunk?

Also re adjusted my lip, a corner tore off from the bumper on the freeway :(

[Muzdaman]

Pulled the tombstone to install an RS products AC panel and classic switch, waiting to get some leds in the post before it goes back together.

[x3Lan]

sent my grid v's out today to be refinished in chrome!! <3

[IanL]

I will add to the chorus of "found / fixed an annoying noise" folks... had a weird low "clunk" coming from the rear when turning, turned out one of the newly installed endlinks did not get tightened all the way down and the rear sway bar was sliding back and forth and bumping into the subframe. 5 minutes with a 14mm socket and wrench, 10 to test drive and make sure all was copacetic, done and done.

[Andy]

i tried to get my timing set. key word is tried

[jesseshoots]

I started my hardtop spoiler. Should be finished tomorrow evening with a DIY writeup coming soon! Let me know of you're interested in it

Pics coming tomorrow in my build thread

[The Driver]

I just bought a hardtop while on business in Denver! Good thing I brought the Taco all the way from Tulsa!!!

Hard Top is in the truck bed. It is BEAUTIFUL. It has only been Montego Blue, no other color!

[majornerd]

1.8l brake upgrade on my '91 and a complete suspension inspection - looks like crap, but everything is working properly. There is no slop anywhere and the shocks / springs do not seem to be failing. Also found out that I have the long crank, and not the crappy shorty....

[CeeJaayDM]

install g wing :)

[LunchboX]

Put on his snowshoes...

http://img715.imageshack.us/img715/5635/imag0489yd.jpg

Ice rally mode engage.

[Benbrg]

Found super awesome hidden road.

Drove said road.

[Muzdaman]

Installed a Nopro washer bottle. I love it.

[The Driver]

Hard Top is in the truck bed. It is BEAUTIFUL. It has only been Montego Blue, no other color!

HT installed, looks sweet! Had to readjust radio volume, heard tranny/driveline lash for the first time. Same with fuel slushing...

[Chops]

Walked by it and looked at it as I got in the Cube to go to dinner. :3:

[Conundrum]

Finally found one of many rattles. Turns out it was from the battery area and that I lack a battery tie down. No bueno. So I did a ghetto fix for the time being and I can keep my sanity.

[adamvanxxx]

Mocked up the flares I got to only see that they are V2 instead of V1. :fp:

[chavy]

when i got out of work there was a puddle under my car.
i got it home and turns out i have a pinhole leak on my gas tank. i covered it up with some seal all until i can find another tank =/

[94R]

The other day, I adjusted the MAF, apparently having it upside down may affect how it works, at this point I'm willing to try anything to get this car running properly. I also adjusted the TPS. But, I haven't been able to take it on a test drive, since we had a dump of snow with more forecasted. So, it'll have to wait.

[Shifto]

Replaced clutch slave and added a SS clutch line (extended) from 949racing

[exdotcomer]

got a ticket on i95- 99 in a 70.
after i slammed the brakes on.
wtf

[IanL]

Put on R front lip, then took her for a drive which ended at the request of the local constabulary.

Was reminded by same that a front license plate is required in the state of Maryland.

Promptly returned home and mounted said plate back into position.

[Brizzle]

put 1.8 rear brakes on

[Dilly]

Finally found one of many rattles. Turns out it was from the battery area and that I lack a battery tie down. No bueno. So I did a ghetto fix for the time being and I can keep my sanity.

Was it an annoying ass rattle that sounded like a HT rattling and only happens on the freeway at high speeds? Because I am having this ridiculous rattle and I can't really seem to figure out what it is exactly. It's coming from the rear passenger side. I don't believe it's my HT because I have Spec Miata plates on the sides. Can't be my roll bar, that's securely bolted down. I has no clue.

[Conundrum]

Was it an annoying ass rattle that sounded like a HT rattling and only happens on the freeway at high speeds? Because I am having this ridiculous rattle and I can't really seem to figure out what it is exactly. It's coming from the rear passenger side. I don't believe it's my HT because I have Spec Miata plates on the sides. Can't be my roll bar, that's securely bolted down. I has no clue.

Yea, it was a really fast tapping/rattling sound. It sounded like it was coming from the passenger side of the trunk. For me it happened when ever the car was in motion. Yours might be the same. Turn it on and then pop the trunk and listen for it. I just had to secure my battery down tight and the noise went away. Also check that the covers for the fuel pump and such are bolted down tight those can make the same annoying noise also.

[CeeJaayDM]

destroyed my exhaust...... :(

[Conundrum]

Hit a dip to hard?

[bovaco]

Finished my Hard Dog Deuce Roll Bar installation.

[revlimiter]

I think I'll have Sharka on jack stands for a couple of weeks. I've got a bad alternator, so I wanna change that out. I found a coolant leak that I've been hunting for months, so I'm gonna take care of that. I might take care of an exhaust rattle. And I might install my big-pimpin' FM fan kit since I'll have the coolant system open.

Today, I put him up on the stands and removed the battery. I then spent an hour cleaning the trunk area from where the POS Mazda wet-cell battery leaked acid.

[revlimiter]

Was it an annoying ass rattle that sounded like a HT rattling and only happens on the freeway at high speeds? Because I am having this ridiculous rattle and I can't really seem to figure out what it is exactly. It's coming from the rear passenger side. I don't believe it's my HT because I have Spec Miata plates on the sides. Can't be my roll bar, that's securely bolted down. I has no clue.

Maybe a trunk spring? Or one of the little wires in the trunk on the passenger side? Or some bolt/crud that's gotten lodged under the gas tank cover?

[Boris]

Finally threw on some new tires.

[jux]

Pulled the soft top out of the 94 and hard-mounted the hard top. Tried to rewire the horn and failed. :(

[fitftw]

bought her a new friend :mrgreen:

'88 Celica GT-S 3SGE 5MT
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/395559_2495569914251_1402947049_32039895_187066410 4_n.jpg

[Tekel]

Replaced my leaking mishimoto radiator with a new mishimoto that was free under warranty (less $25 shipping). Holy crap removing the stupid lower radiator hose took me FOREVER! Dang thing didnt wanna come off.

[Chops]

I put in an huge order for a bunch of nice bright LED's for my BRG's exterior lights... All of them. :mrgreen:

[bokehmon]

Did a front hub yesterday, and fixed a few squeaks.

[ahrut7]

bought 522's for 200 bucks painted them white since they're missed matched and threw brand new falken ziex

[94R]

Snow is gone, so took the car for a spin. Still ran like garbage, so I decided to put my other MAF on just to see what happens... And it ran better with it. True test to come tomorrow when I drive it to work. Got my fingers crossed. I've been real frustrated about my rough running issue and would be ecstatic to have it resolved.

[Drunk Lemon]

replaced my windshield wipers :mrgreen:

[revlimiter]

Swapped out a crappy alternator for a good one. I also greased all urethane suspension parts.

[jux]

Adjusted the bends in one of my Rennenmetal brackets...

[tino]

installed millenium 5 headrest speakers.

[Rezist09]

Installed a new thermostat why cuz mine didn't have one.

[pork n beanz]

stared at my car and wish it was all put back together, damn winter is long

[jesseshoots]

Drive the piss out of it today at Deal's Gap. A few buddies and I went up for the day and made a few passes. It's so much fun, especially when you're with another Miata driver and you're trying to lose the guy in the maxima behind you haha

[The Platypus]

What did I do to my NA today? Absolutely nothing.
Yesterday I finally removed the stupid style bar that's been in there ever since I got the car. I have no idea why I kept it and didn't get a real rollbar. Pretty sure I was just lazy.

[Brizzle]

Made some DIY door pulls on my lunch break.. they came out pretty nice I must say.

[Chops]

Just went out, cleaned both sail windows on the doors, prepping them for the Mazda Roadster.net stickers that Randy gave me the other night. I didn't put them on though because I just realized that they have the white background on them. I'd prefer to have the clear background ones. I know, picky. :|

[The Driver]

Washed and pimped it for a club drive with the NEO Miata Club. That's NorthEast Oklahoma club!

[Titus]

I just finished changing the oil in the 93LE (and the Tahoe). Giving Rottela T5 a try in both rather than the usual Mobile-1. I also picked up a jug of T6 last night that is anxiously awaiting the return of the Rotten Banana so it can be put to use.

[Chops]

I picked up a couple of jugs last night as well and proceeded to... Oh wait... Umm... Never mind. :whistle:

[The Driver]

I picked up a couple of jugs last night as well and proceeded to... Oh wait... Umm... Never mind. :whistle:



:ninja:

[The Platypus]

Yesterday, I put on my Fat Cat Motorsports custom coilovers.

[The Driver]

Yesterday, I put on my Fat Cat Motorsports custom coilovers.


Wow! Pics or it didn't happen...

[Silver92B]

Painted my ugly windshield wiper arms
before:
http://www.fotomecanico.com/miata/dbefore.jpg
after:
http://www.fotomecanico.com/miata/dafter.jpg

Before:
http://www.fotomecanico.com/miata/pbefore.jpg

after:
http://www.fotomecanico.com/miata/pafter.jpg

Cheap mod, about $12 and few hours. But I'm really happy with it. I was tired of looking at those faded/old arms .

[JDMPalace]

Tried my new wheels on, but it's not going to happen ... not with out some body work !! Kinda want to take my brakes off so I can run them :(

[Phatmiata]

.................... Kinda want to take my brakes off so I can run them :(

shave the brake knuckles?

[psulja]

Went to visit it for the first time in a couple months. Felt bad for it being neglected so far away from me so checked up on it to make sure there was no moisture under the carpets. Pulled the seats and carpets and it's all good!

It was nice to see a really clean car with solid floorboards and body unlike my rusty NB. Miss it :(

[corkscrew]

did a clutch job

http://i32.photobucket.com/albums/d29/abc123jason/Mobile%20Uploads/IMG_2674.jpg?t=1327820143

[The Platypus]

Wow! Pics or it didn't happen...

Will post pics in the morning!
Shaikh gave me a custom color/texture for the shock body with gunmetal-colored springs. They look like sex man.
I got 600 F / 375 R and I gotta say it is awesome. It's so much more fun driving now.

[The Platypus]

I had other pics of the coilovers sitting on my table, but I guess my mom erased them or something. There was nothing on the SD card when I looked today. So I took a few quick shots of the coilovers themselves.

http://farm8.staticflickr.com/7170/6783258077_cc30061685_b.jpg (http://www.flickr.com/photos/theplatypus/6783258077/)
Fat Cat (http://www.flickr.com/photos/theplatypus/6783258077/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

http://farm8.staticflickr.com/7148/6783250927_3cd5145d2b_b.jpg (http://www.flickr.com/photos/theplatypus/6783250927/)
Fat Cat (http://www.flickr.com/photos/theplatypus/6783250927/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr
^ I tried to edit it a little bit to make it more visible, but it probably just looks over-edited.

[The Driver]

Those are not the HR springs that come with the set, right? Looks REAL nice! What were your specs regarding springs and valving?


Again, they look NICE!

[Andy]

Ngk spark plugs and plug wires

[fastnfurious7]

Had this made:
http://i902.photobucket.com/albums/ac226/Gregoryga7/crankbushing1.jpg

View in its new home in the crank pulley boss from the back.
http://i902.photobucket.com/albums/ac226/Gregoryga7/cbcloseup.jpg

View in its new home in the crank pulley boss from the front.
http://i902.photobucket.com/albums/ac226/Gregoryga7/crankbushing3.jpg

Just a part of my build on my '93. It'll get an extra long key made for it & when the crank bolt is torqued down it'll tie the whole assembly together so I should never have to worry about the keyway problem again.

[Silver92B]

Removed cleaned and swapped the faded seat belt receivers in my car. The left side one lost the stitches and that held the plastic sleeve over the belt webbing, drover me crazy for years. I finally fixed it too:)

http://www.fotomecanico.com/miata/sbt.jpg

[imperfekt]

looked through the back door at the tarp covering her under my awning....

and ^silver92b i have a coffee mug that looks exactly like that one, except yours probably doesn't say EMED (everyone matters every day)

lol

[The Platypus]

@ The Driver
I found the pics that I took earlier.
Also they were the springs that came with the coilovers. Shaikh hooked me up. Anyways, I got 600 Front and 375 Rear for the spring rates. I'm not sure of the exact specs for the valving though.


http://farm8.staticflickr.com/7144/6787867653_bb741a9695_b.jpg (http://www.flickr.com/photos/theplatypus/6787867653/)
FCM coilovers (http://www.flickr.com/photos/theplatypus/6787867653/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

http://farm8.staticflickr.com/7153/6787870177_07edf476fb_b.jpg (http://www.flickr.com/photos/theplatypus/6787870177/)
FCM Coilovers (http://www.flickr.com/photos/theplatypus/6787870177/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

http://farm8.staticflickr.com/7005/6787873295_7ff12b5a0a_b.jpg (http://www.flickr.com/photos/theplatypus/6787873295/)
Fat Cat (http://www.flickr.com/photos/theplatypus/6787873295/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

http://farm8.staticflickr.com/7157/6787876067_fbf0c92d03_b.jpg (http://www.flickr.com/photos/theplatypus/6787876067/)
_DSC1475.jpg (http://www.flickr.com/photos/theplatypus/6787876067/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

[Chops]

I put these on last night...

http://charlest.zenfolio.com/img/s11/v31/p1000432190-4.jpg

http://charlest.zenfolio.com/img/s11/v27/p586941991-4.jpg

[meeguel]

Finally changed my valve cover gasket! no more oil leak :slayer:

[Rezist09]

http://i1098.photobucket.com/albums/g370/Rezist09/816fe8fe.jpghttp://i1098.photobucket.com/albums/g370/Rezist09/816fe8fe.jpg

[revlimiter]

Swapped out crappy worm gear hose clamps for t-bolt hose clamps. This was on my cooling system.
Shoved some power steering lines around.
Reinstalled intercooler pipes. Now with more clearance! Stupid power steering lines...
Installed spiffy new aluminum hose connector in my long reroute hose.
Installed old Koyo 37mm with new FM uber-fan kit.
Filled radiator.
Started car.
Burped radiator.
Put car on the ground.
Took pix.
Played with toys.
Took more pix.
Installed MR and revlimiter.net stickers.
Took more pix.
Smiled.

[Coupeloop]

BFH-ing around
http://i970.photobucket.com/albums/ae182/windchariot/Minkara/IMAG1272Small.jpg

[The Driver]

@ The Driver
I found the pics that I took earlier.
Also they were the springs that came with the coilovers. Shaikh hooked me up. Anyways, I got 600 Front and 375 Rear for the spring rates. I'm not sure of the exact specs for the valving though.


http://farm8.staticflickr.com/7144/6787867653_bb741a9695_b.jpg (http://www.flickr.com/photos/theplatypus/6787867653/)
FCM coilovers (http://www.flickr.com/photos/theplatypus/6787867653/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

http://farm8.staticflickr.com/7153/6787870177_07edf476fb_b.jpg (http://www.flickr.com/photos/theplatypus/6787870177/)
FCM Coilovers (http://www.flickr.com/photos/theplatypus/6787870177/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

http://farm8.staticflickr.com/7005/6787873295_7ff12b5a0a_b.jpg (http://www.flickr.com/photos/theplatypus/6787873295/)
Fat Cat (http://www.flickr.com/photos/theplatypus/6787873295/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr

http://farm8.staticflickr.com/7157/6787876067_fbf0c92d03_b.jpg (http://www.flickr.com/photos/theplatypus/6787876067/)
_DSC1475.jpg (http://www.flickr.com/photos/theplatypus/6787876067/) by Some Platypus (http://www.flickr.com/people/theplatypus/), on Flickr
Purty....

[George]

Swapped out crappy worm gear hose clamps for t-bolt hose clamps. This was on my cooling system.
Shoved some power steering lines around.
Reinstalled intercooler pipes. Now with more clearance! Stupid power steering lines...
Installed spiffy new aluminum hose connector in my long reroute hose.
Installed old Koyo 37mm with new FM uber-fan kit.
Filled radiator.
Started car.
Burped radiator.
Put car on the ground.
Took pix.
Played with toys.
Took more pix.
Installed MR and revlimiter.net stickers.
Took more pix.
Smiled.

how much $ and where should I send them to? :)

[titch]

Fitted my 'new' OMP harness in the passenger side.

[urban]

i removed my 19 year old gauge hood for the first time without braking any tabs.so happy , i love my car. and finally removed that stupid air bag light.

[friday]

I did some much needed service. Installed new shift boots and replaced the long gone insulation piece that goes on top. Also changed my plug wires and got a new OEM cup holder to replace my broken one.

The boots and insulation piece have made the interior much quieter and the car feels a little spunkier with the new wires. Some of the old ones were not looking too hot. Thanks mazda comp account.

[bovaco]

Put some nice fresh Royal Purple in my trans and dif.

[frogeyes]

ARP extended studs
1.8 brake upgrade
axxis ultimate pads
gaz gold pro coilovers

[jdmfc3s90]

Changed my old broken finish panel, for a nice clean one, successfully making my car 4 different colors

[94R]

Calibrated my TPS again. I think I may need a new one.

[frogeyes]

cut my front wing up :?

http://i214.photobucket.com/albums/cc13/B41LER/Twin%20Carb%20Eunos/IMG_0187.jpg

[imperfekt]

new NGK wires and iridium plugs :P

http://i872.photobucket.com/albums/ab290/gc8stispecc/fad36b84.jpg

[mrpham]

bleh the tailshaft oil seal popped out for some stupid reason and oil went everywhere, so spent some time sealing it back up.

[JDMPalace]

I really tried to make them fit, but nope not gonna happen back to old setup :cry2:

http://i50.photobucket.com/albums/f319/jdmpalace/S20fenders.jpg

[IanL]

:shock: :shock: :shock: :shock: :shock:

[titch]

Swapped the OEM 1.8 rear brace:

http://i241.photobucket.com/albums/ff26/titchster/MX5/2012-02-08142222.jpg

For one made by a guy over on Nutz, sure, there's probably no gain, but it looks nicer, and more robust IMO:

http://i241.photobucket.com/albums/ff26/titchster/MX5/2012-02-08144320.jpg


Shitty phone pics...

[fitftw]

Drove it 30 miles in pouring rain/snow without defroster or wipers. Why? Because racecar. Most dangerous thing I've ever done. Couldn't see anything but the red taillights in front of me.



I really did it because my Celica is broken :fp:

[grueinthebox]

Installed eBay coilover sleeves with Summit Racing springs (350lb front, 250lb rear)... Sleeves are a perfect fit for Bilsteins... Did a layer of duct tape in between the shock body and sleeve as an isolator, but even with just that the - no need for crappy O rings. For half the price of the Ground Control kit I'll see how it does - current plans only include pleasure drives and the occasional autox, and based on my experience with frequent rebuilds of the Tein HAs I had on my old '90 I'm not sure I want to go with a full adjustable coilover setup unless I have to.

Continued prep for paint. Got most of the chip guard off of the passenger side up to the front fender, gave the door and rear quarter a quick pass with the air sander to highlight any dings that need to be taken care of. Hoping to get it ready in time to spray during Spring Break. Have a number of subtle body mods planned that may keep me from meeting that deadline - may end up having to take another week off work around mid-April. Bummer. :P

http://mazdaroadster.net/attachment.php?attachmentid=2200&d=1328999810

Also popped on one of the R2 Limited center caps I've had sitting on my desk for awhile just to see how they look. The man does good work...

http://mazdaroadster.net/attachment.php?attachmentid=2202&d=1329001228

[brian]

Oil change, shell rotella t6 5w-40. Took out the windshield washer tank and started prepping drivers side headlight lid for naca duct install. Didn't even have to use my ak, I must say it was a good day!

[IanL]

Made some wiring harnesses...

http://farm8.staticflickr.com/7182/6859887785_73b402d29f_z.jpg

[R2Limited]

Also popped on one of the R2 Limited center caps I've had sitting on my desk for awhile just to see how they look. The man does good work...


Thanks! And....I totally stole that photo :)

[JTninja]

Attempted to change rotors and pads....did not go well. Total time was about 7 hours, and I messed up somehow, so im still not done. Tried to do a break in run for the brakes, but one of the rear pads is dragging...oh, and now my parking brake doesn't work....I know im a noob but damn....:(

Back to the garage tomorrow!

[R2Limited]

Attempted to change rotors and pads....did not go well. Total time was about 7 hours, and I messed up somehow, so im still not done. Tried to do a break in run for the brakes, but one of the rear pads is dragging...oh, and now my parking brake doesn't work....I know im a noob but damn....:(

Back to the garage tomorrow!How did you retract the rear pistons?

[Flyineunos]

......and how did you put in the new pads?

[JTninja]

Used a hex key to retract, Im assuming the problem with the parking brake is that I didn't tighten it after.

Flyinenuos, not sure what you mean. I had the rear caliper swing up, took out the old pads and rotors, retracted the piston, put the new pads and rotor in, and tighten the caliper up.

[fitftw]

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/429482_2628738363379_1402947049_32080746_465667566 _n.jpg

One of the most annoying installs ever. Not looking forward to doing the driver side. I only was able to get the bottom bolt back in, not the other one, and the screw into the weatherstripping won't get tight. We'll see if it rattles when I'm driving. Might have to mess with it some more. What a pain in the ass.

[adamvanxxx]

I heard the drivers side just gets in your hands way, and that the airflow hits the driver the most from the pass side. You may just want to have just the pass one.

[The Driver]

^ Shoot, that looks nice, but how will water not get inside when it rains? Or cold air during the winter?


All I did today was drive my Miata in the coldest weather that the car had experienced. We had a low of 12 degrees here in Cowtown, but it was sunny so I took for a spin. My summer V rated tires felt HARD at the beginning, but even they normalize after a while. Kudos for friction!

[fitftw]

Yeah I think I'll just sell the driver side NACA window. It does look like it would annoy the crap out of my hand during quick maneuvers. Water would only get inside if it rained horizontally. I can tape it off or put a tennis ball inside of it to block air/water during washes. My car leaks a bit anyway due to gutted doors (windows held in by clips don't seal too well against weatherstrip.) I don't mind because the interior is spartan. Easy to wipe up.

When it's below freezing I try not to drive anywhere. Makes me feel bad for the car lol :/

[Flyineunos]

Used a hex key to retract, Im assuming the problem with the parking brake is that I didn't tighten it after.

Flyinenuos, not sure what you mean. I had the rear caliper swing up, took out the old pads and rotors, retracted the piston, put the new pads and rotor in, and tighten the caliper up.

Ok, for the rear brakes, spin the rear wheels and turn the set screw till the caliper touches the rotor. Then turn it back 1/4 turn. It should not bind at all. Then your set. As for the Ebrake, you will have to go inside and adjust the cable at the handle.

[JTninja]

Did both last night, and went out to brake in the pads/rotors. Its a lot better but it might be a little soft...will ask a friend on his opinion. E brake works better than before, and now have a bucket seat installed :)

[iRoadster]

I filled up my car's tank with gas today. Woot!

[titch]

Drove it to McDonalds and back. Dunno what it is, but something on the rear clunks pretty bad if i'm not super careful dropping off speed humps. I'm not even low FFS.

[WASABI]

Drove it to McDonalds and back. Dunno what it is, but something on the rear clunks pretty bad if i'm not super careful dropping off speed humps. I'm not even low FFS.

Did you do any work to your suspension? My first thoughts are 1.) sway bar endlinks (Racing Beat tend to be loud), 2.) Drive shaft's universal joints., or 3)loose rear shocks (I have seen a couple very loose). Good luck.

-Jim

[kung fu jesus]

I clay bar'd my car for the first time in 11 years of owning it.

[friday]

Has the car been buffed before?

[psulja]

Posted it for sale :/ we'll see what happens. Not expecting many hits right now since it's the middle of winter but figured I'd get it up there for now just in case.

[titch]

Did you do any work to your suspension? My first thoughts are 1.) sway bar endlinks (Racing Beat tend to be loud), 2.) Drive shaft's universal joints., or 3)loose rear shocks (I have seen a couple very loose). Good luck.

-Jim

It's a thud as though something's hitting the ramp/floor, and it's not consistent, it's usually if I roll off it without holding the car on the brake, hence my thoughts that it sounds as though something hitting the floor, what I ideally need is someone in a car behind to see whether anything is actually contacting. I'll have a check of those few things tomorrow though, just to be sure, thanks for the heads up.

[revlimiter]

I looked longingly at Sharka while standing in the garage, holding my screaming daughter who is teething. She loves the garage and her big, blue brother. She quiets down after a few minutes out there.

Why did I stare longingly instead of driving? Slightly moist streets.

[yosh95m]

i ordered a new brake master cylinder hopefully soon she'll be back on the road again

[paulsk]

Wired up an LED strip to a mercury switch and put it in the trunk.

[adamvanxxx]

I looked longingly at Sharka while standing in the garage, holding my screaming daughter who is teething. She loves the garage and her big, blue brother. She quiets down after a few minutes out there.

Why did I stare longingly instead of driving? Slightly moist streets.

Aww she is spoiled.

[kung fu jesus]

Has the car been buffed before?

many times. the car is garage kept.

[Echonova]

Tried fitting some Brainstorm flush mounts yesterday (jutting sitting in, alignment was not final)

http://i1084.photobucket.com/albums/j402/Echonova2/Brainstorm001.jpg
http://i1084.photobucket.com/albums/j402/Echonova2/Brainstorm002.jpg

Wasn't sure I liked how they looked, would probably look fine if I took off the teeth grill. But I took a day to think about it.

Made my decision this morning...




http://i1084.photobucket.com/albums/j402/Echonova2/Brainstormno002.jpg

[adamvanxxx]

Please take the teeth out.

[fitftw]

He can't. They are stenciled onto the grille. :ninja:

[paulsk]

So remove the grille, or paint the whole thing black.

[revlimiter]

I put Sharka on jack stands again so I can beat in all of the fender lips with a hammer. The rolling I did with an Eastwood tool a few years ago turned out to not be that great. Shoulda just used a hammer back then.

[xjdesertfox]

http://i559.photobucket.com/albums/ss35/xjdesertfox/DSC_0776.jpg

not mounted yet. Why plexi? Because racecar.

[adamvanxxx]

I put Sharka on jack stands again so I can beat in all of the fender lips with a hammer. The rolling I did with an Eastwood tool a few years ago turned out to not be that great. Shoulda just used a hammer back then.

Making room for the new addition? ;)

[revlimiter]

The Sharks are a little wider than the RPF1s. :D

[Jimmy Vee]

Fitted Tein Flex + RB front sway bar + 949 endlinks.

[friday]

the sharks are a little wider than the rpf1s. :d


wut!? :shock:

[revlimiter]

^ LOL! Dammit, I snorted tea up my nose. Hot. ouch

[iamdallas]

Attempted to change rotors and pads....did not go well. Total time was about 7 hours, and I messed up somehow, so im still not done. Tried to do a break in run for the brakes, but one of the rear pads is dragging...oh, and now my parking brake doesn't work....I know im a noob but damn....:(

Back to the garage tomorrow!

What happened?! That like a 2 hour Max job! That sucks.

[JTninja]

Haha, it was a mix of

a) never doing it before
b) getting directions confused between my dad vs the manual (which wanted me to mess with the fluid)
c) running out of brake cleaner
d) being a slow wuss

Next time will be a lot faster haha

[Echonova]

http://i1084.photobucket.com/albums/j402/Echonova2/Brainstormno002.jpg



Please take the teeth out.

http://i1233.photobucket.com/albums/ff386/adamvanxxx/IMG_0732.jpg
http://i1233.photobucket.com/albums/ff386/adamvanxxx/IMG_0625.jpg

LOLOLOL


He can't. They are stenciled onto the grille. :ninja:


http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash2/69038_1421016651091_1402947049_31010885_2764172_n. jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/374817_2458362184081_1402947049_32028841_184208629 5_n.jpg

LOLOLOLOLOLOLOLOLOLOLOL


So remove the grille, or paint the whole thing black.

http://i.imgur.com/vKhfV.jpg

You have some room to talk, but no... I will not.

[paulsk]

Huh? That's not me.

[fitftw]

Really bro? You're gonna make fun of my car for the green daisies (winter wheels) and red (the day I got it) hardtop? Wow dude. Wow. At least I have a hardtop, and 2 sets of wheels. I didn't make fun of your car for having a stenciled grille, did I? Get a life.

[The Driver]

Here in Cow Town, the sun is out with 0% chance of rain. The Miata will be getting a work out... ;)

[adamvanxxx]

My car is stock, hate on the manufacturer.


Teeth still look stupid.

[WASABI]

http://i.imgur.com/vKhfV.jpg


Huh? That's not me.

It is now...this is the internet!

[paulsk]

That would be "bzr."

This is me:

http://farm8.staticflickr.com/7209/6888357775_5c2793cf27_z.jpg

[Skomee]

Played tag with a Viper through the Malibu canyons ... At least until my cooling system gave out.

[Brizzle]

Installed a new brake master cyl, and 99 rear tophats

[vampireboy]

cleaned her. also put the stereo blanking plate and moved my headunit to the glovebox :)

[BMS 4EVER]

Washed, clay barred, used swirl remover, polisher, buffed, settled in with a nice coat of sealant. just finished too! :D

[BMS 4EVER]

That would be "bzr."

This is me:

http://farm8.staticflickr.com/7209/6888357775_5c2793cf27_z.jpg

My favorite picture of you. :hellokitty:

[The Platypus]

http://farm8.staticflickr.com/7209/6888357775_5c2793cf27_z.jpg

dat ass

[kung fu jesus]

Installed Bethania doorbars.

Daddy like.

[albertogti117]

Installed Bethania doorbars.

Daddy like.

Very nice. Is it significantly more difficult to get in and out of your car?

[drv2fst]

Put the summer tires back on, good to have some grip back !

[kung fu jesus]

Very nice. Is it significantly more difficult to get in and out of your car?

No. Not for me.

[Skomee]

Fixed my cooling system.

[Jimmy Vee]

Ordered my new wheels:mrgreen:

and realised I reinstalled my rear swaybar upside down the other day.:fp:

[Sarah]

I polished my wheels nuts
http://i203.photobucket.com/albums/aa108/c79sarah/nuts.jpg

[Conundrum]

Tire pressure and gas lol

[AHHthatsJDMyo]

got the rest of the wiring for the old turbo set up out of the car. its almost ready for a motor!!!!

[titch]

Washed it and vacuumed it.

[bovaco]

Installed new brake master cylinder.

[Chops]

Installed (new to me) barely used front rotors, new Hawk front brake pads, and (new to me) wheels and tires.

http://charlest.zenfolio.com/img/s11/v35/p592865017-4.jpg

[Phatmiata]

WOW those wheels look great on your Miata Chops!! Nice find!!

[Chops]

WOW those wheels look great on your Miata Chops!! Nice find!!

Thanks Randy! I appreciate it! The wheels I bought off of Alexis. Obviously, from the pic, you can see I did the install and brakes at Tim's shop, with Tim's help of course.

[The Driver]

Thanks Randy! I appreciate it! The wheels I bought off of Alexis. Obviously, from the pic, you can see I did the install and brakes at Tim's shop, with Tim's help of course.

Tim? What Tim? There is no Tim around here... :ninja:


I'll be washing my car today. Car was clean but a bit dusty, then we got a flash rain on Monday, and it looks filthy!

[WASABI]

Installed (new to me) barely used front rotors, new Hawk front brake pads, and (new to me) wheels and tires.

http://charlest.zenfolio.com/img/s11/v35/p592865017-4.jpg


WOW those wheels look great on your Miata Chops!! Nice find!!

+1 Looking good Chops! Gonna make me up my game now!

[Chops]

+1 Looking good Chops! Gonna make me up my game now!

Haha! Thanks man! You don't have to worry. I'm not in competition with anyone. Your BRG looks great just the way it is. :wink:

[kung fu jesus]

i fit my floormats around the doorbars. looks clean!

[Silver92B]

Made this new door card. Everything went pretty good until the very end... I might have to rework the last place where the bulge meets the door card. Otherwise it came out pretty well I think. :mrgreen:
http://www.fotomecanico.com/miata/d-door.jpg

[KAL]

Car got stolen five weeks ago.
Police called monday and told me they had found it! I had never thought i would ever see it again.
Went to pick it up last wednesday.

What first met me was a not-so-discrete massacre on the trunck lock.

https://img.skitch.com/20120222-drecfbhhe8k7fa532g67id4k18.jpg

The suprise that met me when we opened the trunk.

https://img.skitch.com/20120222-dwjcn14agb7wpf5qpj22sarsh3.jpg

My two extra yellow Koni's. My Koni springs and my original dampers and my tools.
A can of gas and some starter cables was the gift from the thief.

https://img.skitch.com/20120223-dhs839i5c1cqkacrykhb3tsut2.jpg

Inside they had removed the inside of the ignition, leaving it possible for me to start the car with my key.
They had stolen my head-unit and replaced it with another one (!).

All in all i'm extremely happy to have her back. The damage is minimal. A lot less than expected after beeing used for five weeks.
:blauch:

[Chops]

Car got stolen five weeks ago.

Inside they had removed the inside of the ignition, leaving it possible for me to start the car with my key.
They had stolen my head-unit and replaced it with another one (!).

All in all i'm extremely happy to have her back. The damage is minimal. A lot less than expected after beeing used for five weeks.
:blauch:

I'm glad you got your car back. I think that's the first where someone steals your car, steals the head unit and REPLACES it with another head unit!

[oldcafe]

pull off my fenders

http://i39.tinypic.com/rst0ra.jpg

[MiataLife]

Installed my side markers yesterday.( Fresh from Japan thanks to cww180)

Not as scary as I thought it would be thanks to the RevLimter Blog http://www.revlimiter.net/mods/sidewinker.php


http://mazdaroadster.net/attachment.php?attachmentid=2345&d=1330278098

I measured many times and then remeasured when I was done. Dead on perfect!

[xjdesertfox]

I used a ton of pblaster to get off my old header. And throw in this jacksonracing.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/429813_10150595281562284_630617283_9354940_9009946 45_n.jpg

[psulja]

Decided I wanted to keep it, and then right after I made that decision I got an email from an interested buyer.

[The Driver]

Drove it to work. Hve not driven it since Friday, as the truck needed some exercise. Counting the days when the HT goes for vacation...

[Martin]

I took my hardtop off my car yesterday and drove it work today. Well, I drove the car, not the hardtop.

[The Driver]

I took my hardtop off my car yesterday and drove it work today. Well, I drove the car, not the hardtop.

H8U...


Nah, all kidding aside, whe are starting to have spring weather in Okieland, the problem is I have no place to put the HT, so I'll have to wait a couple of weeks when I get to rent a house, hopefully with a garage, to safely place the HT.

[richterat83]

goodies for her

timing belt kit ordered
bosch H4 upgrade headlights ordered (and hella 50/100 bulbs)
stock pop-ups and front mudgaurds ordered (now to find rears. . . . . )

[RyanxStorey]

http://i538.photobucket.com/albums/ff348/mopiwrestler112/1678d5a6.jpg

[jnshk]

Those are perhaps the most stylish safety glasses that I have ever seen. :P Which flares did you get?

[RyanxStorey]

They are the v2 flares. And thanks. I looked good.

[DesignFlip]

I washed her yesterday and today it rained. -_-

[Silver92B]

Bought CDTs years ago but could not fit them in the doors. sat in closet 'til yesterday. Added the Ample amp as well...

http://www.fotomecanico.com/miata/speakers.jpg

http://www.fotomecanico.com/miata/amps.jpg

[Skomee]

Nothing. :(

[wannafbody]

Set the timing.

[austin healey 3000]

needed to cover up the fading paint, until it's time for a proper paintjob
http://i1058.photobucket.com/albums/t420/pradohealey/photo4.jpg

[George]

finaly started stripping it... lack of light and cell phone camera...

http://i581.photobucket.com/albums/ss253/georgeCZ/IMG083.jpg
http://i581.photobucket.com/albums/ss253/georgeCZ/IMG082.jpg

[Vegard]

NA time george!

[George]

yeah, I finaly got another one... and this one's going on diet...

[Caoboy]

I looked at my car today.

[RyanxStorey]

Stared at my interior and decided I'm going to attempt a half dash with the nb dash in my na.

[titch]

Dropped my hardtop off for spraying, so gave it some roof down loving.

[sss1987]

I washed her. Put a new rear number plate on which fits a LOT better. ..Just need to fit wheels. Although snow is apparently on the horizon..again. FFS!!

[MiataLife]

New rear bearings, rotors and pads.

[titch]

Although snow is apparently on the horizon..again. FFS!!

Better hurry up and get those wheels fitted then, hadn't ya? :mrgreen:

[Ladymx5]

Took off the o2 sensors to see if I can clean and salvage them and took off the catalytic converter. Hopefully I am two o2 sensors and a cat away from passing emissions!

[TheFrohn]

yesterday... but i put on some nb1 wheels
http://i25.photobucket.com/albums/c68/Thefrohn/newwhales.jpg

[JTninja]

Bought a used NRG bucket a month ago, lots of scratches on the back, so I painted it. Turned out okay!

http://img.photobucket.com/albums/v653/92692dude/IMGP1545.jpg

[kung fu jesus]

Sprayed a spare parcel shelf cover with undercoating, retrimmed and installed it.
Retrimmed the shelf carpet.
Removed the billet overlay from the clutch pedal.
Dug out a spare set of calipers for rebuilding.

[austin healey 3000]

helped my friend install a very questionable turbo setup...the brand name....JDM sport yo!!
http://i1058.photobucket.com/albums/t420/pradohealey/IMG_9864.jpg

[Flyineunos]

Installed my AAC flush mount headlights today with hid's in the projectors.

http://i129.photobucket.com/albums/p204/flyineunos/99c3ea08.jpg
http://i129.photobucket.com/albums/p204/flyineunos/28ae0432.jpg
http://i129.photobucket.com/albums/p204/flyineunos/cd48c9f7.jpg
http://i129.photobucket.com/albums/p204/flyineunos/6c9628b3.jpg

[mrpham]

Got my side mirrors installed :D
http://omgpham.com/carbon-fibre-side-mirror-install

http://omgpham.com/wp-content/uploads/2012/03/IMG_0668.jpg

[kung fu jesus]

I wrapped my doorbars in Xpel to prevent them from getting chipped and scratched from the belts or getting in and out. It was an easy install. Xpell is like 3M clear bra or those clear covers you can buy for your smart phone. It's shinier than I wanted, but it's not a big deal. A few MTB friends recommended it.

http://i237.photobucket.com/albums/ff166/force_mccocken/IMAG0464.jpg

http://i237.photobucket.com/albums/ff166/force_mccocken/IMAG0465.jpg

http://i237.photobucket.com/albums/ff166/force_mccocken/IMAG0466.jpg

http://i237.photobucket.com/albums/ff166/force_mccocken/IMAG0470.jpg

[Skomee]

Installed my AAC flush mount headlights today with hid's in the projectors.

http://i129.photobucket.com/albums/p204/flyineunos/99c3ea08.jpg
http://i129.photobucket.com/albums/p204/flyineunos/28ae0432.jpg
http://i129.photobucket.com/albums/p204/flyineunos/cd48c9f7.jpg
http://i129.photobucket.com/albums/p204/flyineunos/6c9628b3.jpg

Sweet ride, love the color and the new lights.

[psulja]

Did you have to quote all of those pictures?

[Roadster]

Painted headlight lids body color.
Prepping Trap Lip for paint too.

http://i136.photobucket.com/albums/q172/kevlar_carbonfiber/IMG_2648.jpg

[RyanxStorey]

http://i538.photobucket.com/albums/ff348/mopiwrestler112/dc63accc.jpg

[Flyineunos]

Very Nice Mike! Car Looks great even with the GV lip, but the trap will set it off uniquely.

Ryan, are you new to boost in your NA?

[WASABI]

Painted headlight lids body color.
Prepping Trap Lip for paint too.

Looks good...what color scheme are you going for?

http://www.fagerquist.com/miata/It's a trap.jpg

-Jim

[Roadster]

Grazzi Fred.

Nice racecar look, Wasabi. That's the color the lip is now, primer gray but it'll eventually be painted body color as well.

[BMS 4EVER]

Installed a k&n drop in air filter and installed Bosch h4 headlights that my girlfriend got me for Valentine's Day. :blauch:

[BMS 4EVER]

Before & after pics lol.

Before:
http://i1036.photobucket.com/albums/a450/WillayFoShizzay/My%20Little%20Roadster/DSC00978.jpg

After:
http://i1036.photobucket.com/albums/a450/WillayFoShizzay/My%20Little%20Roadster/DSC00979.jpg
http://i1036.photobucket.com/albums/a450/WillayFoShizzay/My%20Little%20Roadster/DSC00980.jpg

:fab: