owm
01-23-2012, 02:33 AM
This is my first car and will have owned it coming to 3 years this April. 8th owner and took over the car when the mileage was 230,000km (of which I am not sure whether they are original mileages!). Been slowing modifying, building, repairing and maintaining the ride since I took ownership of it.
Current up-to-date list as follows.
1. Handling
Bracing
- Carbing front shock tower brace with brake stopper
- Harddog M2 rollbar
- Ultra Racing front lower brace
- Ultra Racing rear lower brace
- Ultra Racing rear torsion brace
- Ultra Racing 23mm front anti-roll bar, disconnected rear bar
- Boss Frog arms
- Rigid collars
Suspension
- FCM (Fat Cat Motorsports) top mounts
- FCM re-valved height adjustable Bilstein HD on 400F/300R lbf/in springs with 36mm MCU bump stops all round
- Mazdaspeed rubber+PU bushings, engine and differential mounts
2. Wheels
- SSR Type C semi solid forged in gun metallic 15x7.0J 4x100 PCD +35mm offset
- Silverstone EvolVIII 195/55/15 @29psi
3. Brakes
- NB8 Sports front on Centric rotors and PosiQuiet pads
- NA6 rear on Centric rotors and PosiQuiet pads with SS lines
1888
4. Drivetrain
- Exedy OE clutch
- Toda Racing 3.5kg chromoly flywheel
- 6spd gearbox with 3.909 final drive
- Stainless steel clutch hose
- Limited Slip Differential
- De-powered steering rack
- Rebuildable NB8 drive/prop shaft
- NB8 half shafts
5. B6 Engine over-bored to 1.7L
- Flyin Miata Wiseco forged 11:1 pistons + rings
- HKS 256 in/ex camshafts
- Toda Racing adjustable cam gears
- ACL race + thrust bearings
- Cometic MLS head gasket
- GTX 323 block
- COPS (Coil Over Plugs System)
- Ebay engine damper
- 13 row oil cooler
- Oil filter relocation kit
- 55mm Koyo radiator with 1.1bar radiator cap
- Hondata intake manifold gasket
- Maxim Works 4:2:1 OR OBX 4:2:1 header with TDR heat blanket
- Larini cat-back exhaust
- Coolant reroute
- Oil catch can
- Walbro 195lph fuel pump
- Hydra V2.5 standalone ECU
- garageStar Carbon fiber spark plug cover
- Capri valve cover + Maruha cam cover (to be installed)
- Jenvey Quad Throttle Bodies / Individual Runner Throttle Bodies (tuning soon)
- 265cc fuel injectors
- Tomei fuel pressure regulator
1889
6. Fluids used
- Engine: Schaeffers Supreme 9000 5w40
- Transmission: Redline MT-90 GL4
- Differential: Redline 75w90 GL5
- Coolant: Redline Waterwetter + distilled water
- Brake: LiquiMoly DOT4
- Clutch: Caltex DOT3
- Additives: Auto-RX maintenance dose in engine, FuelPower 60 in petrol tank
7. Exterior mods
- OEM front lip from Rspeed
- RS Active low profile headlights
- Zoom Engineering Autoblaze SS door mirror
- OEM 1990 hardtop (18kg; no headliner, no defroster)
- Project-G G-wing hardtop spoiler
1891
8. Interior mods
- RS Refine hand-turned SS gauge rings
- Ebay aluminium gauge center caps
- Nardi Classico 350mm steering wheel with HKB hub
- Nardi Evolution shift knob
- Ebay chrome-plated A/C vent rings, interior lights
- RS Products hazard/light combo switch copy
- ARC rear view mirror
- Sazaire ignition cover
- Isotta handbrake lever + Momo leather boot
- Aerodramatics door handles + lock buttons
- Insulated transmission tunnel and floorpan with aluminium double insulation barrier
- Soft top delete (16kg weight savings)
- Teflon window guide rollers (replace destroyed OEM at rear window guide channel)
- Stainless steel Torx bolts for all latches and striker plates
- Defi DIN gauge
- East Bear Sports Sigma driver seat + rail (6kg in total)
- OEM passenger seat in Alcantara/leather combo
- Green LEDs for instrument cluster
- White LEDs for A/C panel and interior lights
- Zoom Engineering pedals
- RS Products A/C panel
1890
Current up-to-date list as follows.
1. Handling
Bracing
- Carbing front shock tower brace with brake stopper
- Harddog M2 rollbar
- Ultra Racing front lower brace
- Ultra Racing rear lower brace
- Ultra Racing rear torsion brace
- Ultra Racing 23mm front anti-roll bar, disconnected rear bar
- Boss Frog arms
- Rigid collars
Suspension
- FCM (Fat Cat Motorsports) top mounts
- FCM re-valved height adjustable Bilstein HD on 400F/300R lbf/in springs with 36mm MCU bump stops all round
- Mazdaspeed rubber+PU bushings, engine and differential mounts
2. Wheels
- SSR Type C semi solid forged in gun metallic 15x7.0J 4x100 PCD +35mm offset
- Silverstone EvolVIII 195/55/15 @29psi
3. Brakes
- NB8 Sports front on Centric rotors and PosiQuiet pads
- NA6 rear on Centric rotors and PosiQuiet pads with SS lines
1888
4. Drivetrain
- Exedy OE clutch
- Toda Racing 3.5kg chromoly flywheel
- 6spd gearbox with 3.909 final drive
- Stainless steel clutch hose
- Limited Slip Differential
- De-powered steering rack
- Rebuildable NB8 drive/prop shaft
- NB8 half shafts
5. B6 Engine over-bored to 1.7L
- Flyin Miata Wiseco forged 11:1 pistons + rings
- HKS 256 in/ex camshafts
- Toda Racing adjustable cam gears
- ACL race + thrust bearings
- Cometic MLS head gasket
- GTX 323 block
- COPS (Coil Over Plugs System)
- Ebay engine damper
- 13 row oil cooler
- Oil filter relocation kit
- 55mm Koyo radiator with 1.1bar radiator cap
- Hondata intake manifold gasket
- Maxim Works 4:2:1 OR OBX 4:2:1 header with TDR heat blanket
- Larini cat-back exhaust
- Coolant reroute
- Oil catch can
- Walbro 195lph fuel pump
- Hydra V2.5 standalone ECU
- garageStar Carbon fiber spark plug cover
- Capri valve cover + Maruha cam cover (to be installed)
- Jenvey Quad Throttle Bodies / Individual Runner Throttle Bodies (tuning soon)
- 265cc fuel injectors
- Tomei fuel pressure regulator
1889
6. Fluids used
- Engine: Schaeffers Supreme 9000 5w40
- Transmission: Redline MT-90 GL4
- Differential: Redline 75w90 GL5
- Coolant: Redline Waterwetter + distilled water
- Brake: LiquiMoly DOT4
- Clutch: Caltex DOT3
- Additives: Auto-RX maintenance dose in engine, FuelPower 60 in petrol tank
7. Exterior mods
- OEM front lip from Rspeed
- RS Active low profile headlights
- Zoom Engineering Autoblaze SS door mirror
- OEM 1990 hardtop (18kg; no headliner, no defroster)
- Project-G G-wing hardtop spoiler
1891
8. Interior mods
- RS Refine hand-turned SS gauge rings
- Ebay aluminium gauge center caps
- Nardi Classico 350mm steering wheel with HKB hub
- Nardi Evolution shift knob
- Ebay chrome-plated A/C vent rings, interior lights
- RS Products hazard/light combo switch copy
- ARC rear view mirror
- Sazaire ignition cover
- Isotta handbrake lever + Momo leather boot
- Aerodramatics door handles + lock buttons
- Insulated transmission tunnel and floorpan with aluminium double insulation barrier
- Soft top delete (16kg weight savings)
- Teflon window guide rollers (replace destroyed OEM at rear window guide channel)
- Stainless steel Torx bolts for all latches and striker plates
- Defi DIN gauge
- East Bear Sports Sigma driver seat + rail (6kg in total)
- OEM passenger seat in Alcantara/leather combo
- Green LEDs for instrument cluster
- White LEDs for A/C panel and interior lights
- Zoom Engineering pedals
- RS Products A/C panel
1890