I need help before ordering bushings

[JLBMX5]

I drive a 1993 miata. This is not a track toy . Its my Daily driver so not looking for race car mounts. I just picked up a differential axles and drive shaft out of a 2000 NB. I have been reading on bushings . I have seen people giving good reviews on energy suspension bushings and now from what I can tell the part number is 11.4101g but it says it is for 1990 to 1997 dif . So anyone know what part number I should be looking fo . Or will these for right into what I have. I was under the impression they were all the same but now I have no clue Any help would be appreciated.

[kung fu jesus]

If you aren't looking for race car mounts, you should get rubber replacements, not urethane.

[kung fu jesus]

http://www.mossmiata.com/Shop/ViewProducts.aspx?PlateIndexID=80808

[JLBMX5]

I saw these as well
http://www.good-win-racing.com/Mazda-Performance-Part/61-1073DB.html?gclid=Cj0KEQiAsNyxBRDBuKrMhsbt3vwBEiQA dRgPsiPhA5nwMbsHNzKCKY52gV_d-jJ2-ofLxIIDuGV-_IQaAhsq8P8HAQ

[Greasemonkey2000]

IF you do urethane at points that pivot(control arms, etc) make sure you install zerk fittings so you can grease at least once a year, if not more often. Other wise it seems rubber is best for street use, like the I.L. Motorsports.

I have urethane bushings on the front sway bar that needs to be greased and they are noisey any time the sway bar is working but was quiet for over a year after installation. Urethane motor mounts and diff mounts obviously aren't really as much of an issue.