Sharksgiving 2019!!!

[revlimiter]

Sharksgiving 2019 is over!!!!

[revlimiter]

GOODIES!!!

https://revlimiter.net/blog/wp-content/uploads/2019/11/1122190810.jpg

As many of you know, I give away Hot Wheels cars with every order. And I always collect a bunch of the REALLY good ones to send out every Sharksgiving. These are the hard to find cars. The ones that go for $5-20 each on ebay and such. The collector cars.

I have over 500 to give away this year. And about 200 of those are Miatas that I’ve hoarded, traded for, or bought on ebay.

The first Sharksgiving orders will be packed with Miata Hot Wheels. I have ND and NA in the various colors. I’ve got a few Matchbox Miatas as well. And I’ve also got tons of hard to find cars to give away once the Miatas run out.

and...

an RX-8.

https://revlimiter.net/blog/wp-content/uploads/2019/11/DSC_0693.jpg


https://revlimiter.net/blog/wp-content/uploads/2019/11/DSC_0694.jpg

Yes, an RX-8. I’m asking $900 for it OBO. You’ll need a trailer.


https://revlimiter.net/blog/wp-content/uploads/2019/11/DSC_0700.jpg

https://revlimiter.net/blog/wp-content/uploads/2019/11/DSC_0696.jpg

I bought this beauty last summer in non-running condition. I was really hoping that the fix would be easy, so I tried all the tricks. The car has a new ignition system, new starter, new battery, and a few other small bits, but it doesn’t run. This RX-8 needs a new motor.

But that’s it. This car is a beauty. No damage, no rust, and a perfect interior. 6 speed manual. 9k redline… you know, once it has a working Renesis engine installed.

It’s a 2004 with a clean title and about 100k miles (if I remember right). Located in Albuquerque NM. Again, you’ll need a trailer. $900 OBO.

Email adam at revlimiter dot net to claim your RX-8.

This car is offered ONLY on my blog and on MR.net.

[Agent☣Orange]

That’s crazy!

[Phatmiata]

That is a killer deal!!!

[John J]

If you were in Florida I would own it.

[Phatmiata]

If you were in Florida I would own it.

Hey John J are you coming to the year end meet Dec 7th? hope to see you soon! :bow:

[John J]

Planning on being at the event rain or shine. However, the Miata needs a new APP (gas Pedal) which is on order. The problem remains delivery date of the pedal because of the GM strike. I am on the priority list because the engine VIN list the engine as 2007 Corvette. Most recent upgrade has been an install of electric power steering. DIY and LQK method along with epower steering cost less than $300. It really makes a depowered rack much better.

[Agent☣Orange]

Are you sure it’s not the throttle position sensor?

The only thing the GM strike should affect is the new, C8 Corvette and other 2020 GM models. Used parts should be in stock since the C6 has been produced since 2005. Have you tried Eckler’s or Cultrag?

[atank]

Very good looking gauges Adam!!!!!!!

[Agent☣Orange]

I would be swapping gauges every month because they’re all so nice.

[revlimiter]

If you were in Florida I would own it.

The car could go to Florida... They have the technology.

[revlimiter]

https://revlimiter.net/store/gauges/unity-na2.jpg

The winner of the first random free gauges of Sharksgiving 2019 is Brandon with his set of NA Unity Gauges. Congrats Brandon!!! I just refunded your gauge set.

Who will win tomorrow's gauge drawing? Buy a set and try your luck. One set will be refunded the following morning.

[Agent☣Orange]

Man, I wish you made these for Vettes. The C6 has such borrrrrrring, plain gauge faces. There are some stick on faces but they’re just a color change, nothing exciting.

[Phatmiata]

Man, I wish you made these for Vettes. The C6 has such borrrrrrring, plain gauge faces. There are some stick on faces but they’re just a color change, nothing exciting.

Take yours out and send them to him, he makes custom sets for a lot of different models

[revlimiter]

Take yours out and send them to him, he makes custom sets for a lot of different models

It's a bit more complicated than that, but... close.

I'd need a cluster to keep. Usually an ebay cluster works well. And then I'd need to receive it and evaluate it for gauge replacement. Some clusters just fall apart when you take them apart or have gauge faces that can't be changed due to their shape.

Take the RX8 for example. I bought the car because it was inexpensive and had a pretty cool looking cluster. I thought it would be fun to make gauges for. But the tach face is a 3D shape that cannot be altered or swapped with a flat gauge. The tach face HAS to be exactly the same 3 dimensional shape. And that's not in my capacity right now.

I did gauges for the Honda Beat, but that cluster fell apart when I tried to remove the gauges. It was horribly rusty and the plastic was extremely brittle. Not a good candidate to have gauges made for. But the customer really wanted them so I did a single set.

The Mazda MX3 gauges cannot have their needles removed without destroying each individual gauge. When the needle comes out the gauge falls apart. I also made gauges for that car... and the customer could never get them installed and have a working gauge at the end.

[revlimiter]

https://revlimiter.net/store/gauges/starship-nb2.jpg

The second free random Sharksgiving gauge winner is Nam with his set of Starship NB gauges. Congratulations Nam! Your $99 gauge payment was just refunded.

Side note - this gauge set was my tribute to the late Dewa-san who's beautiful gauge artwork inspired me to start doing this.

Who will win the next free gauge drawing? Buy a set to get in the running. I'll refund one of today's purchases tomorrow morning.

[revlimiter]

Whew. Orders are killing me. Which is great!!! I appreciate it. But it's almost 4PM and I'm just now getting to the tasks I had at 8AM today...

Here's today's gauge winner!

https://revlimiter.net/store/gauges/jnc-nd03.jpg

Rick ordered a JNC set for his ND1 yesterday and was randomly refunded this morning. Thanks for the order Rick!! Enjoy your free gauges.

Who will win tomorrow? Put in an order and try your luck.

[Agent☣Orange]

Awesome!

[revlimiter]

Four days of Sharksgiving are down. One week remains!!! The sale will be over next Tuesday.

https://revlimiter.net/store/gauges/circuit-na01.jpg

Today's winner of the random gauge refund was Sandra with her set of NA Circuit gauges. $99 was just refunded and your gauges (which were amazingly in stock) will ship today. Congrats Sandra!

An entire week left! Sharksgiving 2019 is just settling in.

[revlimiter]

Whew. I could sleep for a few days at this point, ya know?

https://revlimiter.net/store/gauges/sunstorm-nb02.jpg

Tannen was the winner of today's random gauge refund. His set of Sunstorm NB gauges were refunded and will be shipped... soon? Orders are piling up. And huge thanks to everyone for the support!!!

Tomorrow is Thanksgiving. The gauge printers will still be running. :) Order a set of gauges and get in the running for tomorrow's gauge refund.

[revlimiter]

https://revlimiter.net/store/gauges/revolver-na02.jpg

The winner of Wednesday's Sharksgiving random gauge refund was Fred with his set of NA Revolvers. Congratulations Fred! Enjoy your free gauges.

Happy Thanksgiving everyone!!! Fill your bellies with good food, your hearts with happy memories, and your cars with fun parts. :)

[Agent☣Orange]

That’s pretty cool. I know how tight budgets get in the holiday shopping season so this is like an early Christmas present that frees up monies for other things.

[revlimiter]

https://revlimiter.net/store/thumbs/sharksgiving_blackfriday-insta.jpg (https://revlimiter.net/store/)
Happy Black Friday!!!

Today's random refund will be both for gauges and horn buttons. 4 winners total!

As before, all you have to do is buy a horn button or gauge TODAY. I'll tally up Today's Orders (yes, today, Black Friday) tomorrow morning (Saturday) and feed them into random.org. The winners chosen will be refunded their gauge or horn button money. You'll only pay shipping and whatever else was in the order.

Good luck and Happy Sharksgiving!!!
https://revlimiter.net/store/

[revlimiter]

https://revlimiter.net/store/gauges/prototipo09.jpg

Darren ordered a set of Prototipo NA gauges on Thanksgiving and was just refunded his $99 purchase price after random.org picked his order from the pile. Congratulations Darren! Enjoy your gauges!!!

And as previously posted, TWO gauge orders will be refunded tomorrow. A guest appearance by two horn button refunds will be in the show as well. Happy Black Friday!

[revlimiter]

Today's is a big one.

https://revlimiter.net/store/gauges/jnc-nb02.jpg
The first winner was Steven with his set of JNC NB gauges.

https://revlimiter.net/store/gauges/cosmos-nc1-1.jpg
Second winner was Jessika with her set of Cosmos NC gauges.

https://revlimiter.net/store/horn/horn-prototipo-hero.jpg
Next was Todd with a blue Prototipo horn button

https://revlimiter.net/store/horn/horn-rainbow80s-hero.jpg
And last was Noah with a Rainbow 80s horn button

All refunds have been processed and I'm pretty well buried in orders. Thanks for the support everyone!!!

Sharksgiving continues and yet another set of gauges will be randomly refunded tomorrow from today's orders. :)

[revlimiter]

https://revlimiter.net/store/gauges/warbird-nb01.jpg

Today's random gauge refund winner is Korey with a set of NB Warbird gauges. I've refunded the gauge price and added it to my huge pile of gauges to make.

Congrats Korey!

Sharksgiving is over on Dec 2nd. I'll shut the sale off before bed. Get your orders in! And thank you all for the support.

[revlimiter]

https://revlimiter.net/store/gauges/fallen-nb04.jpg
Robert was the winner from Sunday's gauge orders. His was randomly refunded this morning. Congrats Robert!

Sharksgiving ends tonight!!!