Tristan75
12-29-2011, 03:52 AM
Title says it all: I am selling a PC Pro and a PC Timing controller for a 1999/2000 Miata ecu. Both are direct plug-n-play with the stated ecu. They were purchased in March 2011 and probably used for less than 5,000 km with a MP62. The PNP harness was wired by the good people at TrackDog Racing for an extra fee. These are both the adjustable version. A vacuum line is also included.
A TurboXS Knocklite will now be included along with the cards. I have already soldered and tapped the rpm signal in the harness. All you will need to do is run the ground, positive wire and signal wire (to knock sensor).
I am asking for the complete package $380 + shipping (North America).
or like this;
. PC Pro and a PC Timing controller + vacuum line + PNP harness wired by TDR for a 1999/2000 Miata ecu. $300 + shipping.
. Knocklite TurboXS + Bosch sensor for $80 shipped.
If you know anyone interested, please let me know. Thanks alot! =)
567
A TurboXS Knocklite will now be included along with the cards. I have already soldered and tapped the rpm signal in the harness. All you will need to do is run the ground, positive wire and signal wire (to knock sensor).
I am asking for the complete package $380 + shipping (North America).
or like this;
. PC Pro and a PC Timing controller + vacuum line + PNP harness wired by TDR for a 1999/2000 Miata ecu. $300 + shipping.
. Knocklite TurboXS + Bosch sensor for $80 shipped.
If you know anyone interested, please let me know. Thanks alot! =)
567