Garage Woolery Summer Tech Day (Saturday, 4 Aug)

[Mr.Woolery]

http://i67.photobucket.com/albums/h301/MrWoolery/SummerTechDayBanner.jpg
Garage Woolery
Summer Tech Day

Where:
Garage Woolery
10131 Shadypoint Drive
Whittier, CA 90603

Map:
http://www.mapquest.com/maps?city=Wh...&zipcode=90603 (http://www.mapquest.com/maps?city=Whittier&state=CA&address=10131+Shady+Point+Drive&zipcode=90603)

When:
Saturday 4 August 2012
10am until whenever (these events usually go on until after midnight)

Who's Invited:
Anyone with a sports car. This is an open marque event, so feel free to invite your friends!

Your Host:
David Woolery
(562) 665-2977

It's summertime...the sun is shining, nights are warm, and the Garage Woolery Summer Tech Day is here! Come out to the season's "MUST DO" event, the Garage Woolery Summer Tech Day! ALL sports car marques are welcomed, so if you know anyone with a sports car, invite them to come along and enjoy the day.

This is a special tech day, as Garage Woolery has had many new upgrades, including a new two-post lift for people to use! We'll also have special guests doing some taping of this event for an upcoming broadcast show segment, so there may be opportunity to show off your car (or find yourself interviewed) for the show!

This is an all day, "come and go as you please" event. It is also a potluck, so BYOB and bring some food/snacks/tools/advice/help if you can. Come out to turn a wrench or just hang out and socialize.

If you have a large maintenance project in mind for the tech day (ie, suspension swap, big brake conversion, timing belt change) please notify me ASAP so I can reserve you a spot appropriate for the job you plan to do. First come, first served.

Vendors are also very welcome to come out to the tech day, so if you have anything you'd like to sell, or you're a vendor, or you know of a vendor who'd like to come, feel free to invite them or refer them to me so I can help them get set up on site.

These seasonal tech days are very well attended. If you've never come out to one before, nows the time to come out to see what you've been missing! See you there!

[Cxmoney]

Will your pitcrew be on display? I really want to see it in person.

[EMMI]

Fucking there! i havnt seen peepz from kinod in a while

[Kuane]

Fucking there! i havnt seen peepz from kinod in a while

Remember when you used to talk all that shit about people that stopped showing up? Things change when you start acting like a grown up....








I'll be there I have a roll bar to install on the red miata before Willow.

[Dilly]

^ LMAO. xD

[Mr.Woolery]

Will your pitcrew be on display? I really want to see it in person.
Yeah, it'll be there.

[jdm slick]

Maybe there...

[Small White Car]

I'll make the trek.


Man, the distances I'm willing to drive for you guys....

[DK Wolf]

Haven't been to one of these yet.. =\

I hope they still happen when I get back.. goddamn

[I<3flippyheadlights]

I wish I could have the chance to go out there. You guys in Cali have all the fun.

[VagaXt]

There for seeing the ol' gang again.

[RoTArYRooKiE]

Sorry guys. I'm going camping that weekend. Y'all could have Vanna grill for everyone. As always David, thank you for opening up your home for us.

[kung fu jesus]

Any volunteers to do DIY/Lifestyle articles/narrative at this?

[Schain]

I will be there. I might install the AEM Intake, throttle inlet tube, bypass valve, O2 mod, and intercooler. I could use some help, might not do all those.

[bokehmon]

Remember when you used to talk all that shit about people that stopped showing up? Things change when you start acting like a grown up....








I'll be there I have a roll bar to install on the red miata before Willow.

Being whipped is grown up? Damn, I must have missed that memo... :lol:





i've got a baby shower that day, but i'll try and make it late (as usual).
I want to see the new lift!

[thedguy]

I'll probably get sent out of town friday night.

Otherwise I'm there.

[Dreaming Hana]

Sorry guys. I'm going camping that weekend. Y'all could have Vanna grill for everyone. As always David, thank you for opening up your home for us.



When was the last tech day you went to Rick? =(

[RoTArYRooKiE]

i think it was last summer actually. i usually only hang out and cook for everyone. i usually like to do all my installs on my own and not have the OG's watching and telling me i'm freakin doing it wrong.

[thait]

my first garage woolery!!!!!!!!!!!!!! since all the previous one laid on a day i wasnt in california -_-

[JonB]

There! To.. install EDFC? That might be asking for trouble, lol. I may just do that at home. Umm... beer and supervise.

[Schain]

There! To.. install EDFC? That might be asking for trouble, lol. I may just do that at home. Umm... beer and supervise.

Seems like this would have been easy to do while installing the teins in the first place lol.

[Traveler]

Woolery, do you have spring compressors?
And can anybody who knows what they're doing help me install FM springs on my MSM (over the stock Bilsteins)? 'Cause I do NOT know what I'm doing.

If so, then I wanna plan on doin that.

[thedguy]

Woolery, do you have spring compressors?
And can anybody who knows what they're doing help me install FM springs on my MSM (over the stock Bilsteins)? 'Cause I do NOT know what I'm doing.

If so, then I wanna plan on doin that.

We're all willing to help supervise while drinking.

Think of a Woolery tech day as more of a Union construction site. Lots of people standing around getting drunk and not much actual work getting done by people who have a clue what they're doing.

[Ham]

Hmm I would need to get my side seal on the diff replaced before hand if I were to make this lol. We will see!

[artcentermiata]

Im there for sure! no big jobs for me, i just want to paint the rusty centers of my brake discs, re-fit my trunk, figure out why my teins only click to 10...

Anybody want bumper cuts done? i can bring my supplies-

[bokehmon]

^you should talk to woolery about that (if you haven't yet). Just to make sure he's OK with it!

[artcentermiata]

^you should talk to woolery about that (if you haven't yet). Just to make sure he's OK with it!

Thought of that after i posted, will do

[jerjozwik]

Woolery, do you have spring compressors?

ive got a scary spring compressor. if you want to gamble.

[Grumpy]

Psssh spring compressors are for wusses. Last tech day we did a away to mazdaspeed springs on my NC. No compressors involved. Emmi would be glad to demonstrate how to properly disassemble without them. Putting them back together? See Jon B and Rob. :D

[Mr.Woolery]

We have spring compressors, so that shouldn't be a problem :)

[Muti007]

Hey Mr. Woolery, how are you sir! Good to see you old friend.

[Kuane]

Im there for sure! no big jobs for me, i just want to paint the rusty centers of my brake discs, re-fit my trunk, figure out why my teins only click to 10...

Anybody want bumper cuts done? i can bring my supplies-

In for bumper cut....

[Kuane]

Also I think we need to put a weight limit on those who wish to sit on the hanging chairs...

[Mexican_Guy]

WHUaUJaJAjaJA! xD lost

[Dilly]

Also I think we need to put a weight limit on those who wish to sit on the hanging chairs...

I wish I was there to see baby Sean fall.

[Traveler]

Psssh spring compressors are for wusses.

Sign me up!


ive got a scary spring compressor. if you want to gamble.

I'd rather go to Vegas for that, but thanks!


We have spring compressors, so that shouldn't be a problem :)

Yes, the big man comes through! Thanks Woolery.

[Traveler]

Im there for sure! no big jobs for me, i just want to paint the rusty centers of my brake discs...

Ooh ooh, I've been wantin to do that too!

[Dweezil]

I hate living in Missouri. :(

[wannafbody]

Woolery needs to do an east coast tech day

[paulsk]

Or somebody over there could just step up and host one.

[Kuane]

Have Tam host a Florida tech day.

[PeTeToTe]

how hard is an AC delete?

[EMMI]

LFW HMU

[zenkimrS]

Can someone help me bleed brakes. That's all I need really.

[Mr.Woolery]

Can someone help me bleed brakes. That's all I need really.
To make the job easy, may I suggest you buy a set of Speedbleeders? They're awesome...I install them on my cars whenever possible.
http://www.speedbleeder.com/

[Kuane]

To make the job easy, may I suggest you buy a set of Speedbleeders? They're awesome...I install them on my cars whenever possible.
http://www.speedbleeder.com/


after all these years I now know your secret....

[artcentermiata]

My god... those are glorious...

Also, i got excited because i thought the 4th was this weekend... now i have to wait!

[EMMI]

i think i got a few alignments i need to do. ill be there bright and early to set up the scales :3

[PeTeToTe]

LFW HMU

?????

[trackstar42]

emmi can you hook it up with an alignment? i did want to do a timing belt but i might just paint my wheels instead.

[EMMI]

emmi can you hook it up with an alignment? i did want to do a timing belt but i might just paint my wheels instead.

as long as its done before u paint ur wheels ok

[Kuane]

Everyone knows that the alignments aren't free right...

[paulsk]

^ And no Racelands.

[VagaXt]

Is there anyway we can get an arrangement to align two cars at once, i.e. Emmi and I tag team to both do alignments at the same time to get the line moving? I have my own equipment that I can bring.

[Dilly]

I have my own equipment that I can bring.

Whoa whoa, we got a badass over here. Lol. xD

[Kuane]

this should be an interesting tech day.....


Someone bring the poker table, I have a feeling we're going to be in for a long night....

[Mr.Woolery]

Is there anyway we can get an arrangement to align two cars at once, i.e. Emmi and I tag team to both do alignments at the same time to get the line moving? I have my own equipment that I can bring.

Since the installation of the two post lift, and with the proper sharing of tools...I think this is possible.

[thedguy]

i think i got a few alignments i need to do. ill be there bright and early to set up the scales :3

I'll believe it when I see it.

[EMMI]

I'll believe it when I see it.

yeaaa, i was lying lol ill be there whenever.

[bokehmon]

Sonny, I'll be your first.:winky:

edit: probably not first, since i'll get there pretty late. I've a baby shower to go to beforehand.

[thait]

can someone help me do them 1.8 upgrade brakes for my miata =]

[Dilly]

Won't be able to make it anymore.

[RoTArYRooKiE]

...ha, i'll be able to go now. I'll bring some brew-ha, bbq a lil and supervise- tell all the newbs how it's NOT done.

[paulsk]

I'll be there in the evening and randomly point at things while asking, "what's that?"

[Kuane]

I'll be there in the evening and randomly point at things while asking, "what's that?"

I will be following you answering with shit like "that's a penis" and "that's a vagina"

[paulsk]

http://24.media.tumblr.com/tumblr_lxkbddP2un1qcykapo1_400.gif

[thedguy]

I'm going to have to find some random act to do there so everyone can repeatedly ask me "WTF are you making now?"

I just made it to 100 posts... m'eh

[VagaXt]

Since the installation of the two post lift, and with the proper sharing of tools...I think this is possible.

If anyone wants an alignment/cornerbalance, the two post will be a huge help.

[kung fu jesus]

I'll be re-skinning the top on Tina's car with my man RayRay today. Drop on by if you want to help. All the Yuengling and Fuze you can drink. Maybe making some bulgogi out of Vizcla puppy too.

[caliboy15]

can I come? <<<<<newbie here. lol

[thedguy]

Feel free, that's why Woolery does this.

[Dreaming Hana]

As always, thank you Woolery for inviting us!

[Mr.Woolery]

Thank you everyone who came out and contributed to the tech day! Once again it was a great success! Lots of cool people and cool cars showed up. :)

[artcentermiata]

No, thank you! Im sure we can all attest to what a welcoming person Dave is! such an awesome community we have!

-Still giggling from the Ariel Atom supercharger whine

[Kuane]

I have never had so much fun talking shit, thank you woolery for making my Saturday exceptionally fun.