ctrench
08-29-2012, 08:54 PM
So im the middle of redoing my interior and making my nakamae console so i wanted to relocate my trunk and fuel lid pulls to another location, so i totally cut out my trunk trigger and cable then relocated my fuel trigger under my seat.
This is the triggers removed
http://img16.imageshack.us/img16/1260/0829121555.jpg
then i undid these 2 bolts on the metal panel to move the cables all the way to the driver side
http://img534.imageshack.us/img534/1701/0829121555a.jpg
here is the triggers, then remove the trunk lid trigger cable and cut it right by the trunk and pull out the entire cable out
http://img856.imageshack.us/img856/1509/0829121555b.jpg
get your dremel and cut off the trunk lid trigger then you must bore out the stock mounting hole to 3/8"
http://img502.imageshack.us/img502/5301/0829121638.jpg
then move the assembly underneath the seat all the way up to the driver foot well
http://img715.imageshack.us/img715/6708/0829121640.jpg
now you get your dremel and hack up your seat bracket to make room for the bracket (you will find out that the mounting tab for the trigger must be bent downward so that you have the ability to pull the trigger)
http://img140.imageshack.us/img140/7343/0829121735.jpg
now it just needs a little spray paint and new seat bolts and im done!!
http://img253.imageshack.us/img253/4199/0829121739a.jpg
http://img525.imageshack.us/img525/2048/0829121739.jpg
This is the triggers removed
http://img16.imageshack.us/img16/1260/0829121555.jpg
then i undid these 2 bolts on the metal panel to move the cables all the way to the driver side
http://img534.imageshack.us/img534/1701/0829121555a.jpg
here is the triggers, then remove the trunk lid trigger cable and cut it right by the trunk and pull out the entire cable out
http://img856.imageshack.us/img856/1509/0829121555b.jpg
get your dremel and cut off the trunk lid trigger then you must bore out the stock mounting hole to 3/8"
http://img502.imageshack.us/img502/5301/0829121638.jpg
then move the assembly underneath the seat all the way up to the driver foot well
http://img715.imageshack.us/img715/6708/0829121640.jpg
now you get your dremel and hack up your seat bracket to make room for the bracket (you will find out that the mounting tab for the trigger must be bent downward so that you have the ability to pull the trigger)
http://img140.imageshack.us/img140/7343/0829121735.jpg
now it just needs a little spray paint and new seat bolts and im done!!
http://img253.imageshack.us/img253/4199/0829121739a.jpg
http://img525.imageshack.us/img525/2048/0829121739.jpg