FS: allen head cam gear bolt set

[SpeedWorks]

What I have is a set of allen head bolts in the correct size to replace your ugly flange bolts holding in your cam gears. These are direct replacement bolts for the stock bolts and will look great for anyone with a cut valve cover and exposed cam gears.

These are 12.9 grade bolts so they can more than hold up to the task on the engine and are zinc coated for a nice and durable finish.

I know these will work on the 1.6 engines, but I have not confirmed on a 1.8. The cam gear bolt should be the same so these bolts should work with no problem.

Item is located in Miami, FL

$20 shipped in the USA

http://i753.photobucket.com/albums/xx174/speedworksgarage/Mobile%20Uploads/09201812_zps3fd96efa.jpg

[KJMagnum]

So these don't need the hats like the $60 setup you just sold?

[SpeedWorks]

So these don't need the hats like the $60 setup you just sold?

correct. The hats from the other set I sold took the place of the washer. With these, you need to use the stock washer from your cam bolt's factory setup.

[ezmfne]

Send me your info if you still have these
Thanx
E