PDA

View Full Version : SOLD 15" BBS RMs 4x100 -- low offset -- not redrilled



SlipNSlide
11-17-2012, 07:16 PM
Hey everyone,
After much consideration its time to part with my dream wheels. This was my first purchase when I bought the car as I always dreamed of owning a set of these. Nonetheless my cars destined for the track and these strong ass wheels are too heavy for my needs. I also don't want to be upset if i were to mess them up on the track.

My cars getting worked on right now. I'll be picking it up on 11/22 from the shop and then I can get pics of each wheel individually etc.

On to the specs...

Wheels: BBS RMs

Pattern: 4x100

Size: 15 x 8.5 +7.6
15 x 7.5 +20.3

Lips: 2.5" step lip in rear
1.5" step lip in front

Color: Black with purple flake

Condition: Few paint chips on the centers, hardly noticeable. One lip HAD an inch of curb rash which I hit with the dremel and now its hard to find but its still there. One wheel is missing the dimple ring and BBS logo all others are intact.

Location: Orange County, Southern California

Fitment Notes: Requires flat roll on NB. Slight pull. Note my front was pulled a lot to allow mad steering angle.

Price: See price breakdown at bottom of post

Pics on my 01

this is from before my roll or pull
5679

5678
5680


rear:
5681




Price breakdown:
$1200 with Dz101 Direzzas 205/50/15 that have chords showing
$1200 with NO tires (that means the roller tires are free)
$1250 I will track down another center ring and BBS logo to complete the set.
$1400 FIRM I will relip two wheels to whatever you want 6.5"-9"
$1600 FIRM I will relip all four lips to whatever you want 6.5"-9"

Thanks for looking.

Contact me here or text 9four9.7 O 2.O575

SlipNSlide
11-22-2012, 07:04 PM
Turkey day bumpppppppp

Buy my wheels and I'll give you immense amounts of leftovers

SlipNSlide
12-03-2012, 06:34 PM
Anyone want some baller ass customizable wheels?

I<3flippyheadlights
12-03-2012, 07:30 PM
Awesome wheels, the stagger hurts but GLWS

SlipNSlide
12-06-2012, 01:28 PM
For $1400 I can make then all 8.5" or 7.5"! I'm aware stagger is not desired all the time so that's why I have the $1400 option!

tsingson
12-06-2012, 02:52 PM
I seriously would like these but I am out in NC.

I<3flippyheadlights
12-06-2012, 04:35 PM
For $1400 I can make then all 8.5" or 7.5"! I'm aware stagger is not desired all the time so that's why I have the $1400 option!

Very true! This helps the same completely! Gives people options, what a swell guy!

SlipNSlide
12-14-2012, 11:51 PM
Sold!!!!!!!!!!!!!