Willywongka
12-04-2012, 08:34 PM
So I finally got around to install my KG works horn button, but I have run into some trouble wiring everything up.
My previous Momo horn button had two wire inputs while the KG only has one. Also the KG requires the aftermarket fitment ring for it to stay in place.
So here is a picture of all of the parts I am using to install the horn. (fitment ring, ground ring, Worksbell QR Rapifix II)
https://lh3.googleusercontent.com/-MnDBlPGD2t0/UL6iDjmyYbI/AAAAAAAAAoI/yxlqGtFSF3s/s1152/20121204_172201.jpg
This is everything put together minus the horn button.
https://lh6.googleusercontent.com/-pt9um2t3Nwg/UL6gs7OQfbI/AAAAAAAAAoE/a4HSfNxWE4w/s1280/20121204_171007.jpg
Everything installed.
https://lh5.googleusercontent.com/-VEi5vpCO2mU/UL6gdrwsrUI/AAAAAAAAAnw/Gt_kg5M56Os/s1280/20121204_171128.jpg
When I attach the wheel to my car with it connected like this it instantly honks the horn.
Now If I only have the red wire attached to the horn button and I touch the (black) ground wire to the brass ring on the side of the horn button, it doesn't honk unless I press the horn button.
https://lh3.googleusercontent.com/-L79WXv-1Ch0/UL6gcEEw1mI/AAAAAAAAAno/LpaRXCFbLLs/s1280/20121204_171031.jpg
I am not sure what I could be doing wrong, maybe I should check the connections on my daikei hub or the end of the Worksbell QR connected to the hub. Any help would be appreciated!
-Will
My previous Momo horn button had two wire inputs while the KG only has one. Also the KG requires the aftermarket fitment ring for it to stay in place.
So here is a picture of all of the parts I am using to install the horn. (fitment ring, ground ring, Worksbell QR Rapifix II)
https://lh3.googleusercontent.com/-MnDBlPGD2t0/UL6iDjmyYbI/AAAAAAAAAoI/yxlqGtFSF3s/s1152/20121204_172201.jpg
This is everything put together minus the horn button.
https://lh6.googleusercontent.com/-pt9um2t3Nwg/UL6gs7OQfbI/AAAAAAAAAoE/a4HSfNxWE4w/s1280/20121204_171007.jpg
Everything installed.
https://lh5.googleusercontent.com/-VEi5vpCO2mU/UL6gdrwsrUI/AAAAAAAAAnw/Gt_kg5M56Os/s1280/20121204_171128.jpg
When I attach the wheel to my car with it connected like this it instantly honks the horn.
Now If I only have the red wire attached to the horn button and I touch the (black) ground wire to the brass ring on the side of the horn button, it doesn't honk unless I press the horn button.
https://lh3.googleusercontent.com/-L79WXv-1Ch0/UL6gcEEw1mI/AAAAAAAAAno/LpaRXCFbLLs/s1280/20121204_171031.jpg
I am not sure what I could be doing wrong, maybe I should check the connections on my daikei hub or the end of the Worksbell QR connected to the hub. Any help would be appreciated!
-Will