View Full Version : trunk wont close
muttnutt
03-20-2013, 04:56 AM
my trunk will not close had to use bungee cord,please any tricks to this? thanks
Demon I Am
03-20-2013, 09:03 AM
Is the trunk aligned properly? Is the latch aligned with the striker? Did the striker somehow get into the closed position? Try using your key to "Unlock" the striker mechanism, while closing the lid.
JLBMX5
03-20-2013, 10:48 AM
Also check in console where the trunk release is you might have something jammed up under that trigger switch
SM16RMSM
03-20-2013, 11:12 AM
My MSM has factory electric truck opener and lately it been jamming up. The actuator that opened the truck should pull shut and release, but mine not releasing. It hanging up and you might be having the same issue. To free it, use the key, just turn the opposite way to pop it back out and you should be find. I think it because of the cold weather.
Demon I Am
03-20-2013, 11:19 AM
maybe some white lithium grease would be useful
SM16RMSM
03-20-2013, 11:27 AM
That is what I thought. I ran into this issue Monday and figure out what is causing it Tuesday. So I haven't had time to find a solution to it.
wannafbody
03-20-2013, 04:46 PM
Duct Tape
muttnutt
03-22-2013, 06:15 AM
thanks guys,i played around with it for a bit, now it shuts and opens fine,just that one night i coulnt figure it out,bungee cord saved me,thanks
maharaj
03-22-2013, 06:24 AM
bigger hammer
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.