MiataRoadster shifter extension on KG Works Short Shifter

[marlonthegreat]

a good search hit for those who are trying out different set up

http://farm9.staticflickr.com/8516/8579914526_8ce8dba61f_c.jpg (http://www.flickr.com/photos/8779637@N03/8579914526/)
P1070916 (http://www.flickr.com/photos/8779637@N03/8579914526/) by marlonmercado77 (http://www.flickr.com/people/8779637@N03/), on Flickr

http://farm9.staticflickr.com/8231/8578815155_e104055c20_c.jpg (http://www.flickr.com/photos/8779637@N03/8578815155/)
P1070899 (http://www.flickr.com/photos/8779637@N03/8578815155/) by marlonmercado77 (http://www.flickr.com/people/8779637@N03/), on Flickr

projectG shift boot

http://farm9.staticflickr.com/8518/8579914602_8cf37b8089_c.jpg (http://www.flickr.com/photos/8779637@N03/8579914602/)
P1070915 (http://www.flickr.com/photos/8779637@N03/8579914602/) by marlonmercado77 (http://www.flickr.com/people/8779637@N03/), on Flickr

http://farm9.staticflickr.com/8511/8578814933_d800062bbb_c.jpg (http://www.flickr.com/photos/8779637@N03/8578814933/)
P1070903 (http://www.flickr.com/photos/8779637@N03/8578814933/) by marlonmercado77 (http://www.flickr.com/people/8779637@N03/), on Flickr

[theothersawyer]

That looks good and is quite different! Nice!

[bigx5murf]

The MR shift extender, tends to loosen up over time due to using a set screw.

If you can mark where the set screw tries to hook on the shifter, file a groove in it for the set screw to catch

[marlonthegreat]

I never had to use the set screw. What I did to achieve the desired position (above), I had to force the shift extender by using a 14mm deep socket with a power handle into the shifter. The MR shift extender is made of aluminum and will easily grind through the metal shifter