Two 4.1 T2 Torsens, RX-7 Housing, 1.8 halfshafts - FL

[whitefly]

I wanted to put a 1.8 torsen in my '90 but things kind of got out of control :lol:

https://lh3.googleusercontent.com/-xKANv6UU7zc/UZGIQZfxcjI/AAAAAAAAFGA/wrCZNYVyWXs/w902-h508-no/13+-+20

In total I have three torsens. All are type-2 with 4.1 gears.

From left to right I have a junkyard torsen with unknown mileage, the torsen from my donor car with 128k and an open 1.8 that I'll be keeping and turning into a spool. Both of those torsens came with broken housings. Luckily I have an extra 1.8 housing and an FC RX-7 housing that is more robust, but will require Miata specific bushings. The buyer can have his choice of differential and housing as any of these would be more than enough for my purposes and all the gears look good.

https://lh5.googleusercontent.com/-rtjCixXemtI/UZGIQTsZUXI/AAAAAAAAFF4/Uw9tYuvoIqI/w902-h508-no/13+-+19

https://lh5.googleusercontent.com/-SBLGmcOJLwY/UZGIQayVN4I/AAAAAAAAFEQ/onRUj-MkRkA/w902-h508-no/13+-+6

I also have a complete torsen from a '96 M with unknown mileage. I have not opened it up, but it spins smoothly as it should.

https://lh6.googleusercontent.com/-MvYBGIVb33s/UZGIQS8ylCI/AAAAAAAAFEY/2a50faXnZMg/w902-h508-no/13+-+7

I have two pairs of 1.8 halfshafts. One pair has spindles still attached, the other does not.

Any torsen - $600

Halfshafts - $175 with spindles, $120 without

Located in Tampa, FL 33569. Can ship at cost.

[whitefly]

I'm also not opposed to trades. I'm looking for a NA 1.8 exhaust and some wheels. Wide-ish old school 13's or new school 15's would make me happy.

[atank]

Are these Two 4.1 T2 Torsens, RX-7 Housing, 1.8 halfshafts still available?

[whitefly]

Only one torsen is available at the moment. The halfshafts are no longer available.