Toolman
06-06-2013, 05:13 PM
SOLD!! Megasquirt DIY PNP...
This DIY PNP kit was FULLY ASSEMBLED by DIY Autotune. This is the Nippon Denso 76 pin version which covers MANY vehicles, including numerous Mazdas, such as the Miata (90-00), Protégé (90-98), MX-6, RX-7, and many other Japanese makes and models. New price for JUST THE KIT is $425.
Mine also comes with the IAT sensor and aluminum bung.
$550.00 plus shipping from 33523 (Tampa, FL area)
Available Features / Technical Specifications
Based on MS2/E Firmware Version 3.2.1 or later
OEM ECU Connector to plug right into the factory harness!
Speed Density, Alpha-N and Hybrid Alpha-N (both SD and A-N algorithms hybridized) Supported
2 Ignition Inputs (for dual wheel ignitions)
4 Spark Outputs (Up to 4 Cylinder Coil On Plug, up to 8 Cylinder Wasted Spark)
Natively support two fuel outputs for batch or bank-to-bank fueling. Optionally upgrade to 4cyl sequential or 6/8 cyl semi-sequential with this module. (http://www.diyautotune.com/catalog/diypnp-upgrade-sequential-injection-kit-p-386.html)
Rotary Ignition Support
Enhanced Acceleration Enrichment (EAE)
Boost Control
Knock Control
Launch Control
Flat Shift
Tachometer Output
Fully Adjustable Rev Limiter
Table Switching
4 General PurposeOutputs
4 General Purpose Inputs (2 analog, 2 digital)
Support for Flex Fuel
Optional Realtime Baro Correction
Closed Loop O2 Correction
Plenty of Proto Area, add your own customizations!
There's more than is listed here-- click this link to view the full feature list of MS2/E. (http://www.msextra.com/ms2extra/MS2-Extra_general.htm#features)
Also- you can click this link (http://diyautotune.com/diypnp/features.html) for the official DIYPNP Product Page Feature List which includes the above list plus a hardware level feature list (that tells you not just what you can do, but what hardware is available to do it)
Note: Some of the features listed above use the General Purpose Inputs/Outputs.
Send me a message if you're interested or have any questions.
See this link for more info:
http://www.diyautotune.com/catalog/diypnp-nippon-denso-76pin-unassembled-kit-p-384.html
This DIY PNP kit was FULLY ASSEMBLED by DIY Autotune. This is the Nippon Denso 76 pin version which covers MANY vehicles, including numerous Mazdas, such as the Miata (90-00), Protégé (90-98), MX-6, RX-7, and many other Japanese makes and models. New price for JUST THE KIT is $425.
Mine also comes with the IAT sensor and aluminum bung.
$550.00 plus shipping from 33523 (Tampa, FL area)
Available Features / Technical Specifications
Based on MS2/E Firmware Version 3.2.1 or later
OEM ECU Connector to plug right into the factory harness!
Speed Density, Alpha-N and Hybrid Alpha-N (both SD and A-N algorithms hybridized) Supported
2 Ignition Inputs (for dual wheel ignitions)
4 Spark Outputs (Up to 4 Cylinder Coil On Plug, up to 8 Cylinder Wasted Spark)
Natively support two fuel outputs for batch or bank-to-bank fueling. Optionally upgrade to 4cyl sequential or 6/8 cyl semi-sequential with this module. (http://www.diyautotune.com/catalog/diypnp-upgrade-sequential-injection-kit-p-386.html)
Rotary Ignition Support
Enhanced Acceleration Enrichment (EAE)
Boost Control
Knock Control
Launch Control
Flat Shift
Tachometer Output
Fully Adjustable Rev Limiter
Table Switching
4 General PurposeOutputs
4 General Purpose Inputs (2 analog, 2 digital)
Support for Flex Fuel
Optional Realtime Baro Correction
Closed Loop O2 Correction
Plenty of Proto Area, add your own customizations!
There's more than is listed here-- click this link to view the full feature list of MS2/E. (http://www.msextra.com/ms2extra/MS2-Extra_general.htm#features)
Also- you can click this link (http://diyautotune.com/diypnp/features.html) for the official DIYPNP Product Page Feature List which includes the above list plus a hardware level feature list (that tells you not just what you can do, but what hardware is available to do it)
Note: Some of the features listed above use the General Purpose Inputs/Outputs.
Send me a message if you're interested or have any questions.
See this link for more info:
http://www.diyautotune.com/catalog/diypnp-nippon-denso-76pin-unassembled-kit-p-384.html