Risingsun124
12-03-2013, 02:05 AM
Precision Series 1.1 Dip Stick Handle
http://i1096.photobucket.com/albums/g337/ProjectGarage2010/PrecisionSeries11DipStickCollagecopy_zpsde94b390.j pg (http://s1096.photobucket.com/user/ProjectGarage2010/media/PrecisionSeries11DipStickCollagecopy_zpsde94b390.j pg.html)
We all HATE our broken dip stick handles. If yours is not broken as you are reading this, it's just waiting to break off and make you feel disappointed every time you look at it. We had played around with a few designs, and we found some of the obvious solutions to just not be what we were after. Finally, we came up with a solution we felt fitting for our Precision Series 1.1.
As long as you haven't broken it below the lower flange, our solution should work for you. It literally takes a few seconds to install, and holds your broken factory dip stick securely.
http://i1096.photobucket.com/albums/g337/ProjectGarage2010/PrecisionSeries11DipStick2Bayscopy_zpsdd91ca42.jpg (http://s1096.photobucket.com/user/ProjectGarage2010/media/PrecisionSeries11DipStick2Bayscopy_zpsdd91ca42.jpg .html)
Here's a couple of the Precision Series 1.1 Dip Stick Handles in action.
For those of you who are looking at the design and are concerned with the added material below the flange, it will move the dip stick up about 1mm. If you continue to follow the actual reading of the stick, at the full mark you will have "slightly" more oil. When you are at the low level, you will still be safe. Or you can just remember there is a 1mm difference.
Our introductory price will be $60 and fits NA6, NA8, NB1, and NB2 - Does not work on "Soft Pull" (Cable) Dip Sticks.
We are not sure if anodized colors will be desired. We are considering supplying all the handles Machine or Polish Finish, and the lower collars anodized colors, or fully anodized. Depending on interest, we will make the decision. For the initial batch, we can do custom colors for an additional $5.
$60 - Machine Finish (MSRP $75)
$65 - High Polish or Anodize Finish (MSRP $80)
**GROUP BUY NOW ACTIVE**
**GROUP BUY NOW ACTIVE**
**GROUP BUY NOW ACTIVE**
Please follow link to chose configuration and order.
http://www.projectgla.com/groupbuy/
This group buy will end Sunday December 8, 2013 at midnight.
REMEMBER, THIS IS YOUR TIME TO GET CUSTOM COLORS. AFTER THIS, ONLY OUR STANDARD COLORS WILL BE AVAILABLE.
If you would like to get a matching Precision Series 1.1 Oil Filler Cap and or Precision Series 1.1 Engine Plug Cover done at the same time, please contact us for details.
The group buy list will be updated as the orders come in.
IF we get 15 or more orders, ONE lucky person will be chosen from the list to receive one Dip Stick Handle for free.
IF we get 25 or more, TWO people will be chosen from the list to receive one Dip Stick Handle each for free.
The winners will be announced when the orders ship.
Here's the list as of SUNDAY afternoon. The group buy ends tonight at midnight.
**The drawing for TWO lucky winners of their free Dip Stick Handle is officially on!!!**
***MAKE SURE TO GET ON THE LIST FOR YOUR CHANCE OF A FREE PRECISION SERIES 1.1 DIP STICK HANDLE***
List:
1. Ramesh N - Handle / Red, Collar / Gunmetal
2. Andrew J - Handle / Clear, Collar / Clear
3. Francisco R - Handle / Machine, Collar / Machine
4. Jason M - Handle / Orange, Collar / Gold, Oil Cap / Gold
5. Ryan P - Handle / Pink, Collar / Pink
6. Jerry B - Handle / Polish, Collar / Orange
7. Johnny G - Handle / Gunmetal, Collar / Gunmetal, Oil Cap / Gunmetal
8. JJ M - Handle / Green, Collar / Green
9. Evan G - Handle / Polish, Collar / Polish
10. Andrew D - Handle / Gold, Collar / Gold
11. Aaron D - Handle / Machine, Collar / Machine
12. Aaron R - Handle / Gunmetal, Collar / Gunmetal
13. Randy G - Handle / Polish, Collar / Polish
14. Darnel B - Handle / Polish, Collar / Purple
15. David N - Handle / Gold, Collar / Purple, Oil Cap / Gold
16. Royce P - Handle / Red, Collar / Silver
17. Michael C - Handle / Machine, Collar / Red, Oil Cap / Machine (No Etch)
18. Rodrick B - Handle / Machine, Collar / Machine
19. Stephen A - Handle / Polish, Collar / Polish, Oil Cap / Polish
20. Daniel S - Handle / Polish, Collar / Polish
21. Reid S - Handle / Polish, Collar / Gold, Oil Cap / Polish (No Etch)
22. Neal A - Handle / Gold, Collar / Gold
23. Berit J - Handle / Gold, Collar / Gold, Oil Cap / Gold (No Etch)
24. Jonathan T - Handle / Gold, Collar / Black
25. Brennan W - Handle / Orange, Collar / Orange
26. John T - Handle / Gold, Collar / Gold
27. John V - Handle / Gold, Collar / Gold
_________________________________^^^All are included in the drawing for TWO of the Precision Series 1.1 Dip Stick Handle Giveaway!!!
28.
29.
30.
WE HAVE OFFICIALLY HIT 25!!!
TWO winners will be chosen from the list to receive their Precision Series 1.1 Dip Stick Handle FOR FREE!!!
TWO FREE PRECISION SERIES 1.1 DIP STICK HANDLES ARE UP FOR GRABS!!!
http://i1096.photobucket.com/albums/g337/ProjectGarage2010/PrecisionSeries11DipStickCollagecopy_zpsde94b390.j pg (http://s1096.photobucket.com/user/ProjectGarage2010/media/PrecisionSeries11DipStickCollagecopy_zpsde94b390.j pg.html)
We all HATE our broken dip stick handles. If yours is not broken as you are reading this, it's just waiting to break off and make you feel disappointed every time you look at it. We had played around with a few designs, and we found some of the obvious solutions to just not be what we were after. Finally, we came up with a solution we felt fitting for our Precision Series 1.1.
As long as you haven't broken it below the lower flange, our solution should work for you. It literally takes a few seconds to install, and holds your broken factory dip stick securely.
http://i1096.photobucket.com/albums/g337/ProjectGarage2010/PrecisionSeries11DipStick2Bayscopy_zpsdd91ca42.jpg (http://s1096.photobucket.com/user/ProjectGarage2010/media/PrecisionSeries11DipStick2Bayscopy_zpsdd91ca42.jpg .html)
Here's a couple of the Precision Series 1.1 Dip Stick Handles in action.
For those of you who are looking at the design and are concerned with the added material below the flange, it will move the dip stick up about 1mm. If you continue to follow the actual reading of the stick, at the full mark you will have "slightly" more oil. When you are at the low level, you will still be safe. Or you can just remember there is a 1mm difference.
Our introductory price will be $60 and fits NA6, NA8, NB1, and NB2 - Does not work on "Soft Pull" (Cable) Dip Sticks.
We are not sure if anodized colors will be desired. We are considering supplying all the handles Machine or Polish Finish, and the lower collars anodized colors, or fully anodized. Depending on interest, we will make the decision. For the initial batch, we can do custom colors for an additional $5.
$60 - Machine Finish (MSRP $75)
$65 - High Polish or Anodize Finish (MSRP $80)
**GROUP BUY NOW ACTIVE**
**GROUP BUY NOW ACTIVE**
**GROUP BUY NOW ACTIVE**
Please follow link to chose configuration and order.
http://www.projectgla.com/groupbuy/
This group buy will end Sunday December 8, 2013 at midnight.
REMEMBER, THIS IS YOUR TIME TO GET CUSTOM COLORS. AFTER THIS, ONLY OUR STANDARD COLORS WILL BE AVAILABLE.
If you would like to get a matching Precision Series 1.1 Oil Filler Cap and or Precision Series 1.1 Engine Plug Cover done at the same time, please contact us for details.
The group buy list will be updated as the orders come in.
IF we get 15 or more orders, ONE lucky person will be chosen from the list to receive one Dip Stick Handle for free.
IF we get 25 or more, TWO people will be chosen from the list to receive one Dip Stick Handle each for free.
The winners will be announced when the orders ship.
Here's the list as of SUNDAY afternoon. The group buy ends tonight at midnight.
**The drawing for TWO lucky winners of their free Dip Stick Handle is officially on!!!**
***MAKE SURE TO GET ON THE LIST FOR YOUR CHANCE OF A FREE PRECISION SERIES 1.1 DIP STICK HANDLE***
List:
1. Ramesh N - Handle / Red, Collar / Gunmetal
2. Andrew J - Handle / Clear, Collar / Clear
3. Francisco R - Handle / Machine, Collar / Machine
4. Jason M - Handle / Orange, Collar / Gold, Oil Cap / Gold
5. Ryan P - Handle / Pink, Collar / Pink
6. Jerry B - Handle / Polish, Collar / Orange
7. Johnny G - Handle / Gunmetal, Collar / Gunmetal, Oil Cap / Gunmetal
8. JJ M - Handle / Green, Collar / Green
9. Evan G - Handle / Polish, Collar / Polish
10. Andrew D - Handle / Gold, Collar / Gold
11. Aaron D - Handle / Machine, Collar / Machine
12. Aaron R - Handle / Gunmetal, Collar / Gunmetal
13. Randy G - Handle / Polish, Collar / Polish
14. Darnel B - Handle / Polish, Collar / Purple
15. David N - Handle / Gold, Collar / Purple, Oil Cap / Gold
16. Royce P - Handle / Red, Collar / Silver
17. Michael C - Handle / Machine, Collar / Red, Oil Cap / Machine (No Etch)
18. Rodrick B - Handle / Machine, Collar / Machine
19. Stephen A - Handle / Polish, Collar / Polish, Oil Cap / Polish
20. Daniel S - Handle / Polish, Collar / Polish
21. Reid S - Handle / Polish, Collar / Gold, Oil Cap / Polish (No Etch)
22. Neal A - Handle / Gold, Collar / Gold
23. Berit J - Handle / Gold, Collar / Gold, Oil Cap / Gold (No Etch)
24. Jonathan T - Handle / Gold, Collar / Black
25. Brennan W - Handle / Orange, Collar / Orange
26. John T - Handle / Gold, Collar / Gold
27. John V - Handle / Gold, Collar / Gold
_________________________________^^^All are included in the drawing for TWO of the Precision Series 1.1 Dip Stick Handle Giveaway!!!
28.
29.
30.
WE HAVE OFFICIALLY HIT 25!!!
TWO winners will be chosen from the list to receive their Precision Series 1.1 Dip Stick Handle FOR FREE!!!
TWO FREE PRECISION SERIES 1.1 DIP STICK HANDLES ARE UP FOR GRABS!!!