17X10, 4X100, and affordable. Does it exist

[Unk577]

I'm looking for a 17X10 wheel in 4X100 that isn't custom made, a Rota, a Forgeline(CCW, etc). Most likely looking for something in the neighborhood of 20mm offset. I would like a decent wheel that is <$500/wheel.

Before we get into a debate about 15" vs 17", the reason I'm looking for the 17" is there are a greater range of performance and/or race tires available in 17" where as in 15" the widest commonly found street tire is 225 and 275 in a race tire.

I've been looking and the majority of the choices range in price from $740 to $1500+ Per wheel. More than I would like to spend since I will most likely be buying 2 set initially.

Tell me what y'all know of

[Phatmiata]

...........

Before we get into a debate about 15" vs 17", the reason I'm looking for the 17" is because I have a 400+hp V8-Roadsters Miata ..........




Fixed that for ya!! :teehee:

[m00se]

On cr.net some guy had 17x10 XXRs on his miata, offset was around 0 if i remember correctly.

[TimTim]

This may or may not be the cr link referenced above:

http://clubroadster.net/vb_forum/32-brakes-wheels-tires-sponsored-jscspeed-com/49916-xxr-526-pic-request-6.html

Top of page involves an aesthetic-driven application. Further down other members post racing/competition oriented applications.

[druz]

You might have a little more room with your NB but the biggest issue is tire height. I'd love to run 275/40/17s but they won't fit, even with my N2 flares.

[Unk577]

Yeah those wheels on the silver car and the green car are in the $1k/wheel neighborhood. I wouldn't put the XXR's on my garbage can. Did just read 12 pages of somewhat useful info on MT.net.

I may need to revisit what tire sizes are available for 16's....

[Unk577]

You might have a little more room with your NB but the biggest issue is tire height. I'd love to run 275/40/17s but they won't fit, even with my N2 flares.

Yeah I don't think a 275/40/17 is going to fit on a NB either without tubing the front of the car or running an excessively high ride height. 245/40/17 maybe. I'll try fitting one up this week

[Phatmiata]

ask Shandelle to make a NC rotor swap to 5-lugs, then you can whatever size you want easy!!

[Unk577]

Even if the hub would fit the upright the position of the hub face would have to exactly the same to get the caliper to line up with the rotor. Then the rotor hat would have to be designed to clear the hub and drill in 5X114. Not simple for me

[cbaylis77]

Can't link from my phone but check out the SSR Professor MS1R. 17x10.5. Vivid Racing has them for $665. Don't think you'll find much cheaper than that. You can find some great 17s for the rear of a Lotus but they ain't cheap.

[Phatmiata]

Can't link from my phone but check out the SSR Professor MS1R. 17x10.5. Vivid Racing has them for $665. Don't think you'll find much cheaper than that. You can find some great 17s for the rear of a Lotus but they ain't cheap.


3-piece is the way to go with this wide of a wheel, good call cbaylis!! http://www.ssr-wheels.com/wheels/ms1r_151617.asp


http://www.ssr-wheels.com/images/ms1r/gold_lrg.jpg http://www.ssr-wheels.com/images/ms1r/graysilver_lrg.jpg http://www.ssr-wheels.com/images/ms1r/flatblack_lrg.jpg

[Unk577]

I like it. Now if I can maybe(not likely) find a used set to bring the price down some...

[turbotyla]

Depending on your weight goals. XXR have 17x9.75 for cheap. I bought one for test fitting.

http://i304.photobucket.com/albums/nn173/turbotylaa/20130705_194429_zps365c11e1.jpg (http://s304.photobucket.com/user/turbotylaa/media/20130705_194429_zps365c11e1.jpg.html)

[Unk577]

Being that it would be for street use, the weight wouldn't be my biggest concern.
What size tire is that? Looks like it's stretched

[turbotyla]

It's not stretched too bad. It's a 235/40 but I planned on getting a sticky tire that would of ran wider.

But I remember there is another size 245 I think. That would work.

But a 17x9 would be nice and a 235/40 would be great mine is +20
On a nb. So maybe +25. Or just x9.

Here is a picture on unrolled fenders

http://i304.photobucket.com/albums/nn173/turbotylaa/20130602_183127_zps25f7b84d.jpg (http://s304.photobucket.com/user/turbotylaa/media/20130602_183127_zps25f7b84d.jpg.html)

[Unk577]

I'm tempted..

[turbotyla]

Another thing to consider is that q 285/30/18 is smaller in diameter then most 17s. :/

I go through this all the time in my head. I want 17x9s eventually. And maybe a wide body. Because they will have to go out further to not hit the cars body

[Golden Stallion]

if you are considering 17x9s, what about fifteen52 tarmacs also under 300 each. available in 4x100 (atleast has that under the options).

[turbotyla]

But look terrible

[wannafbody]

Joe Fis racing runs a 17" wheel on his Miata. Check out there website or Facebook page for info.

[belair53]

I'm running 17x10 20 xxr 526's. Tires are 215 40's.
12287
12288
12289

[turbotyla]

Joe FIS website says 15x10s.

[wannafbody]

https://www.facebook.com/231234230245507/photos/a.621772271191699.1073741838.231234230245507/712893298746262/?type=1&theater

[Unk577]

Trying to avoid going to 5 lug, would have to change too may things

[Opgedronken]

I know this thread is old af and forums aren't as popular anymore, but still this might be good for reference.

If you're looking for cheap and wide 17's that aren't garbage reps look no further than the 2 Piece RH and Artec wheels.
They start out at an insanely high offset of 60 on a 17x8 wheel and can be spaced out and relipped (cheaply) for any size you could need on an mx5.

Here's one of my cars on a set of 17x9 RH ZW1's with 25mm spacers which would make the effective offset about 22.

19260

I've now found a set of less common (but still cheap) Stahl S3 wheels, that uses the same lips and sizing as the RH's.
They have a bit more of a bbs RC look going on with convex Y spokes, for those who don't like the porsche style fat convex 5 spoke.

[GoodWin Racing]

Here we are with 17x10 4x100 and Yokohama AO52 245/40/17 in testing last weekend on our Fiata. Likely 6 months before first production batch is here.

23408

[GoodWin Racing]

And NOW it exists!

Race Fitment 17x10 Now In Stock!

Konig Hypergram 17x10 +43 4x100 Semi Matte Black (https://www.good-win-racing.com/Mazda-Performance-Part/61-3278.html)

Konig Hypergram 17x10 +43 4x100 Race Bronze (https://www.good-win-racing.com/Mazda-Performance-Part/61-3115.html)


https://www.mazdatalkforum.com/download/file.php?id=8636&mode=view
https://www.mazdatalkforum.com/download/file.php?id=8670&mode=view

[GoodWin Racing]

Next batch 15x10 likely arrives end of this week so we have these set to 'prepay' for the racers wanting to make sure they have a set for this season.

Konig Dekagram 15x10 4X100 ET25 Matte Black (https://www.good-win-racing.com/Mazda-Performance-Part/61-2421.html)

https://www.good-win-racing.com/images/items/485x485/61-2421.webp

https://www.mazdatalkforum.com/download/file.php?id=8389&mode=view

[Phatmiata]

I kinda just want to Make a Glass Table outta one of these wheels for my garage.

[GoodWin Racing]

The POWER of GRIP. Our FiataSpeed at last BMW Club Autocross.
Smallest Displacement Motor Takes Top Spot, 1.4 liter Turbo.
Crusty date code 2021 tires made it a challenge to keep pointed the right direction but it got the job done!



https://www.mazdatalkforum.com/download/file.php?id=10748

Ohlins Coilovers.
https://www.good-win-racing.com/Mazda-Performance-Part/61-1823.html

System ONE Exhaust System
https://www.good-win-racing.com/Mazda-Performance-Part/61-2349.html

OS Giken Superlock LSD for Fiat 124
https://www.good-win-racing.com/Mazda-Performance-Part/61-2164.html

Progress Sways:
https://www.good-win-racing.com/Mazda-Performance-Part/61-1784.html

RoadsterSport Endlinks:
https://www.good-win-racing.com/Mazda-Performance-Part/61-1795.html

APR Splitter.
https://www.good-win-racing.com/Mazda-Performance-Part/61-2423.html

Hypergram 17x10 Wheels, custom fitment exclusive to Good-Win Racing.
https://www.good-win-racing.com/Mazda-Performance-Part/61-3115.html

Cipher Steering Wheel.
https://www.good-win-racing.com/Mazda-Performance-Part/61-2774.html

Go Fast Bits DV+ Diverter Valve
https://www.good-win-racing.com/Mazda-Performance-Part/61-1973.html

Blackbird Fabworx Fire Extinguisher kit for ND/Fiat 124.
https://www.good-win-racing.com/Mazda-Performance-Part/61-2407.html

Blackbird Fabworx Lexan Spoiler:
https://www.good-win-racing.com/Mazda-Performance-Part/61-2382.html


Blackbird Fabworx RZ Roll Bar:
https://www.good-win-racing.com/Mazda-Performance-Part/61-1785.html


Goodwin Racing Premium 12.88" Front Big Brake Kit with 6 piston calipers:
https://www.good-win-racing.com/Mazda-Performance-Part/61-1725.html

Goodwin Racing ND Ultralight Rear 4 Piston Caliper Upgrade:
https://www.good-win-racing.com/Mazda-Performance-Part/61-1968.html


https://www.mazdatalkforum.com/download/file.php?id=10749