Printable View
My car is a '95 NA8.
I find that most of the solutions out there connects the cop harness to the plugs that original goes into the OEM coil-packs. That seems like a good and clean solution. But I have trouble finding those plugs for the harness that should go into the plugs that went into the OEM coil-packs.
Anyone know a good source for those?
Another question is, could I just bypass the plugs on the engine-harness and connect straight into the car-harness?
:)
Seems like on the NA8, you can actually use a 6 pins plug and connect to the plug that are connected to the left for the coil-packages. The contacts are small and grey.
Learning new stuff all the time.
This is the one that I need.
Attachment 23266
Two things to consider: salvage that plug from a spare or eliminate it altogether by replacing it with another weatherproof 6 pin connector on both sides (male and female).
IIRC, the factory coil harness is detachable from the coils individually.
I really like your VIN swap.Quote:
Originally Posted by Slampen
I hate it.
Sent fra min SM-G975F via Tapatalk