Attachment 14303
Attachment 14304
Attachment 14305
Attachment 14306
Attachment 14307
Attachment 14308
That's what comes in the box ... Can't wait to install them
Printable View
Attachment 14303
Attachment 14304
Attachment 14305
Attachment 14306
Attachment 14307
Attachment 14308
That's what comes in the box ... Can't wait to install them
Might be a dumb question … but these ok to drive on a DD? There a water issue you need to worry about?
I still didn't do it yet ... but it is fine .. if u are extra paranoid like me .. make a plate and attach it or bolt it over the ecu so the water doesn't hit it straight on ...
I installed a set of the NA/NB louvers on my MSM. It took me a little while to work up the courage to cut up my hood, but once I did it went rather smoothly. I started out by drilling out the corners with a christmas tree step bit, and then basically connected the dots with an angle grinder with a thin metal cutoff wheel. The next step is smoothing out the edges and matching them up nicely with the template. I started by trying to use an air grinder with a grinding stone but it was pretty much useless. The stone would get clogged with aluminum very quickly, and it was hard to get a clean line. I then tried using a metal rasp, which worked VERY well. It was much easier to control than the air grinder and ended up making some very smooth, pretty much perfect edges. One thing I wish i did differently would have been to mask off more of the surrounding areas of the hood than I did. If I could do it again I would have laid down a couple layers of masking tape at least 6" out in all directions from the cut lines. I did accidentally slip once with the rasp and scratched the paint on my hood. :(
http://img.photobucket.com/albums/v6...7E7DB6DADE.jpg
any more pics? I'd like to see an overall shot and the under-side
Found a friend to powder coat them for me for $40... I will bend the vents then give it to him to do it for me
Anyone have a rough idea about how much is it going to cost to have some one cut it for me ? ?
I didn't have the time to install them, if any is interested please let me know