So I was wondering what bulbs would be compatible for the RS Active Type 2 headlights. I want to buy a set just incase they happen to burn out, thanks!
Printable View
So I was wondering what bulbs would be compatible for the RS Active Type 2 headlights. I want to buy a set just incase they happen to burn out, thanks!
Are you looking to upgrade the light output? Or just have spares?
I have a few spares, I'll try to remember to look when I get home.
H3. If you come down to SoCal again I'll give you a pair for free. :)
Attachment 13790
H3 is the type of bulbs to get eh? Ahhh shiet, there is a chance I may come down again for JCCS. Thanks for the tip!
Are you considering entering JCCS again this year?
I was considering something that might be an upgrade... but might just stick with the same bulbs. But wouldn't mind a little brighter output.
Probably going to JCCS, depends on if I can convince others to go.
So I am wondering if I need to stick with a specific voltage / wattage? I see on the package that you posted is 12V 85W, is it safe to go higher?
I would like to get the BRIGHTEST H3 bulb I can run on my RS actives without melting the lens or cause any electric issues. I am also wondering what brand bulb I should stick with.
I have considered going HIDs, but I know that involves running ballasts. So if I can find a bright enough bulb I won't go HID.
Thanks guys!
I got tired of the poor output of my RSActive headlights. It was bad enough I considered selling them. Instead I replaced the housings with PIAA 960 housings, which are the real version of the knockoff light that RSA used in their kit. Though the PIAA are larger, they fit just fine.
http://i683.photobucket.com/albums/v...B7B1A176CA.jpg
I stuck with the stock 12V 55watt H3 bulbs, but switched to better quality PIAA bulbs.
Any thoughts on using a LED bulb in either the PIAA or RS housing? I have used OEM replacement LED bulbs and those had fans to get rid of the heat. Love the output on them and wish I could duplicate that.
Thanks for the info Modern Beat! I was thinking about just changing the bulbs on my RSA's to try to improve light output. I guess I just want to know if its safe to use a higher wattage for better output.
bumping this for updates
anyone switch to LED output, or brighter bulbs? Ill think I am gonna go down the PIAA road here shortly. I live in the woods and its dark as heck coming home at night.
well I just ordered some PIAA 960 lights on the interWebz so ill keep you guys posted, I see the bulbs can be changed out for some even bright ones, which ones are you guys using?
I was considering upgrading these bulbs, but not sure if they would get too hot?
Hey Randy,
I ended up buying Some H3 ECE R37 DOT Compliant PIAA Extreme White Plus 4000k Bulbs (H3 55W-> 110W)
I mean they are fine, but would mind a little bit brighter.
While we are on the subject, is it possible to run the high beams in junction with the normal running lights? When I turn on my high beams my low beams turn off.
Might also be good to note that I am not running the wiring harness the RS A's came with cause I just couldn't get them to work so I am just running them straight through to the oem harness with a little bit of modifications, are you using the wiring harness Randy?