20B PP MX-5 Track Car (WTAC Open Class Specification) 20b Miata
Hi guys,
Firstly this build project started way back in 2006 and due to various reasons (seven years on) it's still not finished. :roll:
However, a few months ago I made a decision to change the engine spec which in turn has provided a clearer path to the finish line so to speak. Essentially the car was being built as nothing more than a toy to go and do some sprints with. But of course as the years go by things change, experience is gained and the project is viewed in a whole new light.
A build thread exists on the MX5 Cartalk forum (http://mx5cartalk.com/forum/viewtopic.php?f=57&t=30796) so you can see the path that the project taken up until May this year when I changed the engine specification (http://mx5cartalk.com/forum/viewtopi...0796&start=480). I'll start the build thread from that point.
Cheers,
Danny
Quote:
Anyhow, the Renesis NC Track Car build project has effectively stalled.....so much so that I need to drop a PM to a forum moderator to change the title.
I can't spare the time that is required to develop the supercharger kit to a level that would make it a robust/reliable engine package. It's pretty obvious that after three years of nothing in the engine R&D area that another year isn't going to yield much!
The "third party" supercharger kit was/is lacking in too many areas and the market/demand has contracted for such a product (and the RX-8 ceased production 12 months ago)....ie. Low chance of recovering on investing in completing the R&D of the Renesis supercharger kit.
So that door has closed...however another has opened! Stay tuned!
Quote:
Originally Posted by orx626
Quote:
Originally Posted by rxmx
Seeing your involved with rota's 20b??
Bingo! A peripherally ported 20B to be exact! :twisted:
Cheers,
Danny
Quote:
Originally Posted by orx626
Quote:
Originally Posted by rxmx
Will you be at time attack again this year?
Yes I'll definitely be there in some capacity. :D
Quote:
Originally Posted by 16bit
350 to 400whp sounds good.
you gonna have a centre bearing on the shaft?
Hi James, with recent developments in this area it could possibly go well over the 400rwhp mark. A few weeks ago similar spec 20B PP made 520fwhp on 888 Racing's engine dyno! :twisted: Time will tell what's achievable with my engine package.
I'm using a 20B block as opposed to an aftermarket 13B based triple rotor (short crank). I don't require an eccentric shaft bearing support between the second and third rotors...also you would require a custom eccentric shaft for this. As it will be naturally aspirated not too much engine strengthening is necessary...which is good in keeping the costs down! :P
Here's a Youtube video of a mate's 20B PP he built back in 2007 for his RX-2 sedan! Gotta love the free revving nature!
http://www.youtube.com/watch?v=IeViolISyGc
Cheers,
Danny