Got the intake side buttoned up. Modified the M-Tuned fuel rail so that I can get the valve cover on and off easier, this consisted of beveling three areas where the bolts pass through. Used new insulators for the injectors where they go into the head. Ground down the thermostat to fit the new spacer and finished making the gasket needed so that is all closed up. Cleaned up and painted the JR header. I think I got all the peanuts blown out of the inside, I'm going to run my fish tape through it before bolting it up just to make sure.
Fuel rail mod: http://farm8.staticflickr.com/7285/9...7510a06b_c.jpg
Reroute spacer firewall clearance (I know, kind of hard to see but it's more than with the BEGi spacer): http://farm8.staticflickr.com/7324/9...f5c47056_c.jpg
Modified thermostat: http://farm3.staticflickr.com/2845/9...ce4e54b5_c.jpg