not sure if this is meant for me, but yes i just ordered my begi spacer... cant wait!!! then i remove all the idle functions (dashpot, icv, etc) and my engine bay will almost be finished, except for boost
Printable View
That is a serious bargain, named brands like Mishimoto would have cost something like 4 or 5 times as much for all that kit.
Did spot a similar kit in the UK on Ebay for around $2000 :toomuch:
Glad it's holding up to your beating and the hate you're getting for buying parts from eBay. Guess I'll have to get one in time.
ok so i had my poker run last night... cruising at 5200rpm at 105mph for about and hour total drive time, and it held up fine, the temp gauge never went over 3/8 of the way up!!!
I bought a set of fans/shoud on the boards that I am sure are similar to this.
Extremely easy to install. I cut the pigtails off of my old fans and connected those to the new ones, which made everything Plug & Play. Since I have an oem radiator , I had to widen out 2 bolt holes with a drill.
I also lined the facing edges of the shroud with weather strip foam, to ensure a nice seal.