I respectfully disagree; they are hell of fast cars on straights, but weight shows quite a lot during cornering or braking. That being said, I would love something like that complementary to my NB.
Printable View
I respectfully disagree; they are hell of fast cars on straights, but weight shows quite a lot during cornering or braking. That being said, I would love something like that complementary to my NB.
Weight and brake management isn't something I really have to pay *that* much attention to on my previous Miatas. I drive most cars as momentum cars on the track, moving to a heavier, more powerful car is something I don't have a lot of experience with in that environment.
No. I’m in Northern Virginia so it must’ve been someone else with exceptional taste [emoji41]
Coincidentally, this afternoon I pulled up at a stoplight right next to a sweet looking BMW Z4 (E89) sDrive35is LCI in Estoril Blue. It was neat to compare and contrast. The Z4 obviously offers a more dynamic driving experience. But you can tell our cars were designed by the same people.
BMW has often produced some of my favorite shades of blue.
One of those 10 minute #detailsmatter jobs…
New side marker lights.
https://uploads.tapatalk-cdn.com/202...42282f72d2.jpg
Old, UV-damaged on the left, minty fresh on the right
https://uploads.tapatalk-cdn.com/202...70d4def635.jpg
It’s been rainy, car is dirty, ceramic coating works like a champ though.
Old:
https://uploads.tapatalk-cdn.com/202...a175173dd8.jpg
New:
https://uploads.tapatalk-cdn.com/202...0d2d8dcc71.jpg
The car has wheel locks. I hate wheel locks. Even though I have two keys, I don’t trust them to always work. I also don’t want to be searching for the key when I need it most, so I replaced them with new OE wheel bolts.
Wheel lock on left, key in front, OE bolt on the right.
https://uploads.tapatalk-cdn.com/202...cddb732ab5.jpg
https://uploads.tapatalk-cdn.com/202...cc9341ddad.jpg
A few ugga-duggas later, and some click-clicks on the torque wrench, job done!
https://uploads.tapatalk-cdn.com/202...d0c146cbb9.jpg
70 degrees on 12/26, time to do some work.
Replaced the AC tensioner and belt this is literally a 20-30 minute job.
The pulley was definitely at EoL. I could hear it chatter sometimes at start up or shutdown.
https://uploads.tapatalk-cdn.com/202...f7191464fa.jpg
Easy access after dropping the splash tray.
https://uploads.tapatalk-cdn.com/202...a16f42d2df.jpg
Loosen one 16mm bolt.
https://uploads.tapatalk-cdn.com/202...751f2a0497.jpg
Put a t55 here and rotate clockwise to release tension on the belt to remove.
https://uploads.tapatalk-cdn.com/202...afa5f91a90.jpg
Finish removing the 16mm. New vs old below.
https://uploads.tapatalk-cdn.com/202...e2b072cd38.jpg
Belt was alright, but starting to show signs of cracking and glazing.
https://uploads.tapatalk-cdn.com/202...56069afbff.jpg
https://uploads.tapatalk-cdn.com/202...6bcf28a26d.jpg
A few spritzes of brake clean to tidy the area.
https://uploads.tapatalk-cdn.com/202...884ceb036d.jpg
Install new tensioner and belt.
https://uploads.tapatalk-cdn.com/202...70866eeb9a.jpg
Moved on to the fuel filter. This filter has the fuel pressure regulator built in. It is under the left side of the car, inboard of the structural rails, behind the front wheel a bit, under a protective metal cover.
https://uploads.tapatalk-cdn.com/202...26d028f1e5.jpg
https://uploads.tapatalk-cdn.com/202...90c444c03f.jpg
For Alex:
https://uploads.tapatalk-cdn.com/202...2693caa9a2.jpg
https://uploads.tapatalk-cdn.com/202...d5829cf626.jpg
I can tell it has been replaced by the clamps. I would have to look up when, but the fuel tank was replaced due to a recall in ‘08 IIRC, so maybe that’s when this was done. They didn’t replace the little connecting bits of fuel hose nor the vacuum line pig tail to the FPR. The vacuum line was very brittle. Fortunately, I had plenty in my tool chest to replace them. I also had replacement clamps too.
https://uploads.tapatalk-cdn.com/202...2b93b32d2b.jpg
https://uploads.tapatalk-cdn.com/202...8f485f0c81.jpg
https://uploads.tapatalk-cdn.com/202...b793d83dc5.jpg
https://uploads.tapatalk-cdn.com/202...a7a52afe4f.jpg
https://uploads.tapatalk-cdn.com/202...a51b5f8735.jpg
Not a lot a spillage. I capped the ends as I took the hoses off. Just worked cautiously and deliberately to prevent a fire.
Tidied everything up and reinstalled the cover.
https://uploads.tapatalk-cdn.com/202...27b1718cce.jpg
https://uploads.tapatalk-cdn.com/202...ce475df688.jpg
Next up was the oil change. It’s a little early, but I wanted to take advantage of the weather. WIX XP oil filter and 7 quarts of 5w30 synthetic. I love the density of the filter material and number of pleats on these Wix XPs. Worth_it.
https://uploads.tapatalk-cdn.com/202...643257cb19.jpg
After that, a much needed wash and vacuum.
https://uploads.tapatalk-cdn.com/202...dea1828ae4.jpg
With the new coils, plugs, filters, oil, this engine definitely feels noticeably more responsive and stronger.
It dawned on me that a lot of these parts have the build date printed or stamped on them. The date on the new fuel filter reads 4/2021 for instance. I dug the old filter out and found 03/03/10, so it makes sense and coincides with records that came with the car.
https://uploads.tapatalk-cdn.com/202...35e524c72b.jpg
I also dropped by a reputable BMW indie shop, Harrison Motorsports, to book rear subframe reinforcements for the unibody, AKG bushings, and a few odds and ends while the car is there. Goes under the knife 1/17.
Hell yeah, love the BMW updates Steven.
It is surprisingly easy to work on!
A little more info on the repairs coming up I decided to have done.
The locations where the rear sub frame (RSF) mounts to the body is prone to cracking under hard use. I don't suspect mine has this issue, but I do intend to occasionally track the car. This is an inherent, known flaw to all the e46s. There are a lot of different methods to solve this, and as many different 'kits'. I'm going with a welded-in systems of plates.
You can see examples of the cracking here.
I will be using the Synchro Design Works kit and having it done professionally. It entails dropping the entire rear subframe, exhaust, diff, and fuel tank. This kit wraps around the problem areas more than others and uses thicker material. Some kits don't reinforce the area or spread the load out enough and the cracks can still happen.
Attachment 23543
When completed, would look similar to this:
Attachment 23544
Additionally, all the bushings in the rear will be replaced:
AKF rear trailing arm bushings (with integrated lateral limiters)
Attachment 23545
AKG subframe bushings
Attachment 23546
AKG differential bushing
Attachment 23547
I will also have the shifter replaced with the factory short shifter, the mechanicals replaced too. A nice OEM+ upgrade.
Attachment 23548
Attachment 23549
And the flex disk (guibo) between the driveshaft and transmission will also be replaced.
New Year Day drive into the north Georgia mountains, wound up in Helen, GA.
https://uploads.tapatalk-cdn.com/202...abd56d21be.jpg
What a beautiful scene!
They have a German Alpine aesthetic. Maybe a little too much, but it’s interesting. Streets are Strasse (even on Google maps voice).
It’s about 75-90 minutes away taking 50/50 back roads and freeway.
Reminds me of Leavenworth, WA. https://leavenworth.org/webcams/. It is a neat little Bavarian town high up in the Cascade mountains about 120mi drive through the mountains from Seattle. One of my favorite drives.
Attachment 23551
Small update, some further study combined with previous experience, I decided to go with OE rear trailing arm bushings instead of P/U. I have had enough suspensions where rotating P/U bushes have caused a lot of noise and required some re-lubricant to stay quiet.
Given the location and dynamics of this point, it seems like rubber would be the prudent way to go. I will be adding lateral limiters that go in either side of the bushings to reduce lateral deflection and dynamic toe.
Here is how this looks, the limiters are shown in white:
https://uploads.tapatalk-cdn.com/202...2a272e2a0b.jpg
And look like this:
https://uploads.tapatalk-cdn.com/202...51edc9f743.jpg