Flush Lights Group Buy REV9 and JetStream Japan

[—RuckkehrMiata—]

Those are... surprisingly effective...

[Tkblazer]

Too bad it's just in front of the car and nothing to the outside

[— fwdtamiya —]

^ True. Beam pattern is exceptionally narrow, you can see a defined line on the ground, where the bucket blocks the light from throwing out to the sides. Are there going to be normal/white bulbs or just yellow?

edit: NM, could just pick up some white ones at the store

[★ invert ★]

Okay, so we talked with Jet Stream and they should be able to make production faster. So delays should be shorter for customers


UPDATED GROUP BUY LIST

1. #4161
2. #4162
3. #4165
4. #4166
5. #4167
6. #4168
7. #4169
8. #4164
9. #4172
10. #4163 DEPOSIT
11. #4144
12. #4173
13. #4177
14. #4178 DEPOSIT
15. #4182 DEPOSIT - PAID FULL
16. #4184 DEPOSIT
17. #4188
18. #4195
19. #4197 DEPOSIT
20. #4204
21. #4207
22. #4260
23. #4281 DEPOSIT
24.
25.
26.
27.
28.
29.
30.

And a picture for your viewing pleasure:

[iKhanh]

i'll order in two weeks, Max!

[★ invert ★]

Some units started shipping Only 1 day left for the Group Buy!

UPDATED GROUP BUY LIST

1. #4161 - SHIPPED
2. #4162 - SHIPPED
3. #4165 - SHIPPED
4. #4166 - SHIPPED
5. #4167
6. #4168 - SHIPPED
7. #4169
8. #4164
9. #4172
10. #4163 DEPOSIT
11. #4144
12. #4173
13. #4177
14. #4178 DEPOSIT
15. #4182 DEPOSIT - PAID FULL
16. #4184 DEPOSIT
17. #4188
18. #4195
19. #4197 DEPOSIT - PAID FULL
20. #4204
21. #4207
22. #4260
23. #4281 DEPOSIT
24. #4369 DEPOSIT
25. #4424
26. #4433 DEPOSIT
27. #4436 DEPOSIT
28.
29.
30.

And a picture of the final product we started shipping TODAY!

[Nyaa]

Hey Max, for those of us that couldn't get the scratch together for this group buy, will we be able to order them solo?

[— Phatmiata —]

looks so cool.

[★ invert ★]

Last day to get your awesome Jet Stream Tail Lights at $175 off!!!

UPDATED GROUP BUY LIST

1. #4161 - SHIPPED
2. #4162 - SHIPPED
3. #4165 - SHIPPED
4. #4166 - SHIPPED
5. #4167
6. #4168 - SHIPPED
7. #4169
8. #4164
9. #4172
10. #4163 DEPOSIT
11. #4144
12. #4173
13. #4177
14. #4178 DEPOSIT
15. #4182 DEPOSIT - PAID FULL
16. #4184 DEPOSIT - PAID FULL
17. #4188
18. #4195
19. #4197 DEPOSIT - PAID FULL
20. #4204
21. #4207
22. #4260
23. #4281 DEPOSIT - PAID FULL
24. #4369 DEPOSIT
25. #4424
26. #4433 DEPOSIT
27. #4436 DEPOSIT
28. #4437
29. #4439
30.

[★ invert ★]

Hey Max, for those of us that couldn't get the scratch together for this group buy, will we be able to order them solo?

Yes, they'll still be available, but not at the discounted price...

[mx54life]

Can someone chime on how effective night driving would be on this sexy lights?

[Magpie]

Pulled the pin on these during the REV9 group buy. The main purpose is to duct/ram air into the ITB's and it was impossible with the OEM popup lights.

The OEM setup (with FRP covers) weight in at 4.587kg each side, the Jetstream weigh in at 1.040kg.

What you get! Whilst the instructions are for non English readers they were not really needed. I ran a few copies of the template off so as to not destroy the one included. The kit does require you to reuse your existing H4 bulbs. I made the decision to not reuse the HID projector bulbs and go back to 'normal' lights. The Dapper lighting kit has already been put aside for somebody else...

DSCN2746 by Eipeip, on Flickr

DSCN2749 by Eipeip, on Flickr

DSCN2747 by Eipeip, on Flickr

The marking out.. Is this going to be like my air vent in the hard top, will I regret this...
DSCN2750 by Eipeip, on Flickr

The first cut is the deepest. For the first side I used a dremel with cutting disc. However I ended out using the air body saw to finish it off and it was so much easier!
DSCN2751 by Eipeip, on Flickr

Installed
DSCN2756 by Eipeip, on Flickr

DSCN2755 by Eipeip, on Flickr

View with 1 installed (not screwed down) and the existing
DSCN2752 by Eipeip, on Flickr

DSCN2753 by Eipeip, on Flickr

Both sides installed and wired in (plug and play)
DSCN2764 by Eipeip, on Flickr

This was at about 1300 inside the shed
DSCN2763 by Eipeip, on Flickr

Now the issues found.
1. Can't use the OEM bonnet prop, need to find an alternative.
2. Coolant bottle fouls drivers side plug.

DSCN2757 by Eipeip, on Flickr

DSCN2758 by Eipeip, on Flickr

Coolant bottle solution was to use the coolant bottle from a NB with custom mounts.
url=https://flic.kr/p/znQnFW][/url]DSCN2778 by Eipeip, on Flickr

Heaps of room for the plug now
DSCN2779 by Eipeip, on Flickr

DSCN2782 by Eipeip, on Flickr

DSCN2783 by Eipeip, on Flickr

Now to remove the popup motor harness...

The solution to the loss of bonnet prop:

DSCN2808 by Eipeip, on Flickr

I have not had a chance to align the lights and take them for a night time ride as the car getting ready for WTAC in Sydney.

The lights were installed into this, it has had a few more changes since this photo was taken (headlights of course, end plates and splitter just to name a few):

DSCN2350 by Eipeip, on Flickr