SOLD
$375 SHIPPED in the USA !!
These are factory option foot pedals which first appeared on the M2-1001 Cafe Roadster in 1991, then later on started showing up as an OEM Eunos Roadster Option. I have beed told by other members some early NA6s already have the holds drilled but mine did not so I basically just bought this set as a template for another set I already had. So your miata may or may not need to have the holes in your foot pedals (Brake and clutch only) but I did mine with a cordless drill, was not too much hassle. As long as you have GOOD drill bits (the ones with needle tip) otherwise the bit will walk on that smooth bare metal.
R-Limited foot pedals on 93LE by Randy George, on Flickr
As you can see on the backside they have a nut holding them on, taking that off you can see they are drilled pedals.
R-Limited foot pedals on 93LE by Randy George, on Flickr
So all I had to do (Since I have the complete assembly) was make a template and that way I have the exact points to drill them at.
Just so there is no confusion you only need to install the pedals not the arms, im sending all parts though because I no longer have use for them.
You can see I have already installed mine, took 10 minutes or so, and looks way better than those clip on types in my opinion
R-Limited foot pedals on 93LE by Randy George, on Flickr