Yes please! I know that the 14" variant has a stepped hub bore, and the rear of the hub bore sits flush, which prevents use of a standard center cap design like that used on the 15" RPF1. There is a depression on the inside wall of the outer hub bore itself where a center cap may clip in. I need to know the outer hub bore diameter, the maximum diameter of overlap before protruding into the lug holes, the depth of that depression on the hub bore wall from the face of the wheel, and the volume/shape of that depression.
This is a pic Proyea kindly took for me to illustrate. As you can see the inner hub bore is irrelevant to my interests.