not sure if this is meant for me, but yes i just ordered my begi spacer... cant wait!!! then i remove all the idle functions (dashpot, icv, etc) and my engine bay will almost be finished, except for boostOriginally Posted by Kuane
not sure if this is meant for me, but yes i just ordered my begi spacer... cant wait!!! then i remove all the idle functions (dashpot, icv, etc) and my engine bay will almost be finished, except for boost
That is a serious bargain, named brands like Mishimoto would have cost something like 4 or 5 times as much for all that kit.
Did spot a similar kit in the UK on Ebay for around $2000
Glad it's holding up to your beating and the hate you're getting for buying parts from eBay. Guess I'll have to get one in time.
1990 Miata, she was red but now she is Spirit Green!
http://mazdaroadster.net/showthread....d-a-love-story <--- build thread!
Also check out the facebook page http://www.facebook.com/IHeartFlippyHeadlights !!! Its a facebook page dedicated to the awesomeness which is flippyheadlights! Not me, but the actual headlights! High time someone noticed how awesome these things are; check it out!
ok so i had my poker run last night... cruising at 5200rpm at 105mph for about and hour total drive time, and it held up fine, the temp gauge never went over 3/8 of the way up!!!
I bought a set of fans/shoud on the boards that I am sure are similar to this.
Extremely easy to install. I cut the pigtails off of my old fans and connected those to the new ones, which made everything Plug & Play. Since I have an oem radiator , I had to widen out 2 bolt holes with a drill.
I also lined the facing edges of the shroud with weather strip foam, to ensure a nice seal.
Posting Permissions
Reply With Quote
