So after many requests of an easier solution to the Center Brace for our G-String, Project-G finally had some time to get to work on this. We had gone through a few different phases of this project and finally came up with a solution we are happy with.
As many of you already know, when you purchase our kit, you need to custom fit the center brace since all the roll bars are slightly different, and the length of this particular component is critical to correct fitment of your G-String. Our solution comes fully assembled as shown, so there is no more shaping and trial and error fitting. Being as good as we are with fitting the previous Center Braces, we were still taking 20-30 minutes to do a good job.
The Project-G EZ Install Center Brace:
It takes a 30 minute - 1 hour job and turns it into a 1 minute or less task. You simply put the EZ Install Center Brace in position, tighten up the Adjustment Collar to achieve the desired tension, lock the Adjustment Collar in place with the Lock Collar, and tighten up the Set Screw to lock it all together. No more dremel tool headaches. This is also makes using your G-String on different vehicles simple. Since it installs and adjusts in a few twists, it's no longer a chore to fit to a different setup. It gives you a full 2.75" of adjustment. More if you remove collars.
We are doing an introductory group buy on this.
$65 +Shipping.