It is the upper seat that can adjust the spring preload and damper stroke .
Stroke adjustment range of 30mm plus normal value from (NB genuine upper sheet ) .
It is possible to eliminate when I lower the vehicle height commercially harmonic drive kit of short case type and lowdown spring , the insufficient stroke compression-side , you can take the balance of the growth side , and to adjust the spring pre- load .
It is recommended to the harmonic drive kit vehicles equipped with short case of the stroke of the compression side is insufficient in particular .
High tensile strength steel (S45C) full after cutting , was coated by applying a plating process , the body has sufficient strength and rust .
Lock nut and threaded portion to adjust the stroke in super- duralumin , I am friendly lightweight anodized .
Spring corresponds to direct winding (ID60) from the normal shape .
There is no mechanism to lower the vehicle height to [ Note: this article.
Rubber mount of the components is a consumable item . I recommend the exchange to aim 20,000 km run .
* Dedicated mount rubber (Nielex original )